u-boot/doc/board/nxp/imx8mn_evk.rst
Fabio Estevam f0f461287e imx: Suggest the NXP ATF github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:

"QUIC repositories on this site will not receive any updates after
March 31, 2022, and will be deleted on March 31, 2023."

Point to the NXP ATF github repo instead.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2023-01-31 16:02:05 +01:00

56 lines
1.1 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0+
imx8mn_evk
==========
U-Boot for the NXP i.MX8MN EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get firmware-imx package
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: srctree is U-Boot source directory
Get ATF from: https://github.com/nxp-imx/imx-atf
branch: imx_5.4.47_2.2.0
.. code-block:: bash
$ make PLAT=imx8mn bl31
$ cp build/imx8mn/release/bl31.bin $(srctree)
Get the ddr firmware
--------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9
$ cp firmware-imx-8.9/firmware/ddr/synopsys/ddr4*.bin $(srctree)
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mn_ddr4_evk_defconfig
$ make
Burn the flash.bin to MicroSD card offset 32KB:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
Boot
----
Set Boot switch to SD boot