u-boot/arch/arm/mach-stm32mp/bsec.c
Patrick Delaunay a33885ff49 stm32mp: Add support of STM32MP13x in bsec driver
Add support for "st,stm32mp13-bsec" for STM32MP13x in the
bsec driver based on OP-TEE pseudo TA STM32MP BSEC.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-12 16:37:13 +01:00

815 lines
19 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#define LOG_CATEGORY UCLASS_MISC
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <log.h>
#include <misc.h>
#include <tee.h>
#include <asm/io.h>
#include <asm/arch/bsec.h>
#include <asm/arch/stm32mp1_smc.h>
#include <dm/device.h>
#include <dm/device_compat.h>
#include <linux/arm-smccc.h>
#include <linux/iopoll.h>
#define BSEC_OTP_MAX_VALUE 95
#define BSEC_OTP_UPPER_START 32
#define BSEC_TIMEOUT_US 10000
/* BSEC REGISTER OFFSET (base relative) */
#define BSEC_OTP_CONF_OFF 0x000
#define BSEC_OTP_CTRL_OFF 0x004
#define BSEC_OTP_WRDATA_OFF 0x008
#define BSEC_OTP_STATUS_OFF 0x00C
#define BSEC_OTP_LOCK_OFF 0x010
#define BSEC_DENABLE_OFF 0x014
#define BSEC_DISTURBED_OFF 0x01C
#define BSEC_ERROR_OFF 0x034
#define BSEC_WRLOCK_OFF 0x04C /* OTP write permananet lock */
#define BSEC_SPLOCK_OFF 0x064 /* OTP write sticky lock */
#define BSEC_SWLOCK_OFF 0x07C /* shadow write sticky lock */
#define BSEC_SRLOCK_OFF 0x094 /* shadow read sticky lock */
#define BSEC_OTP_DATA_OFF 0x200
/* BSEC_CONFIGURATION Register MASK */
#define BSEC_CONF_POWER_UP 0x001
/* BSEC_CONTROL Register */
#define BSEC_READ 0x000
#define BSEC_WRITE 0x100
#define BSEC_LOCK 0x200
/* LOCK Register */
#define OTP_LOCK_MASK 0x1F
#define OTP_LOCK_BANK_SHIFT 0x05
#define OTP_LOCK_BIT_MASK 0x01
/* STATUS Register */
#define BSEC_MODE_BUSY_MASK 0x08
#define BSEC_MODE_PROGFAIL_MASK 0x10
#define BSEC_MODE_PWR_MASK 0x20
/* DENABLE Register */
#define BSEC_DENABLE_DBGSWENABLE BIT(10)
/*
* OTP Lock services definition
* Value must corresponding to the bit number in the register
*/
#define BSEC_LOCK_PROGRAM 0x04
#define PTA_BSEC_UUID { 0x94cf71ad, 0x80e6, 0x40b5, \
{ 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03 } }
/*
* Read OTP memory
*
* [in] value[0].a OTP start offset in byte
* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
* [out] memref[1].buffer Output buffer to store read values
* [out] memref[1].size Size of OTP to be read
*
* Return codes:
* TEE_SUCCESS - Invoke command success
* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
*/
#define PTA_BSEC_READ_MEM 0x0
/*
* Write OTP memory
*
* [in] value[0].a OTP start offset in byte
* [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
* [in] memref[1].buffer Input buffer to read values
* [in] memref[1].size Size of OTP to be written
*
* Return codes:
* TEE_SUCCESS - Invoke command success
* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
* TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
*/
#define PTA_BSEC_WRITE_MEM 0x1
/* value of PTA_BSEC access type = value[in] b */
#define SHADOW_ACCESS 0
#define FUSE_ACCESS 1
#define LOCK_ACCESS 2
/**
* bsec_lock() - manage lock for each type SR/SP/SW
* @address: address of bsec IP register
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: true if locked else false
*/
static bool bsec_read_lock(u32 address, u32 otp)
{
u32 bit;
u32 bank;
bit = 1 << (otp & OTP_LOCK_MASK);
bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
return !!(readl(address + bank) & bit);
}
/**
* bsec_check_error() - Check status of one otp
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: 0 if no error, -EAGAIN or -ENOTSUPP
*/
static u32 bsec_check_error(u32 base, u32 otp)
{
u32 bit;
u32 bank;
bit = 1 << (otp & OTP_LOCK_MASK);
bank = ((otp >> OTP_LOCK_BANK_SHIFT) & OTP_LOCK_MASK) * sizeof(u32);
if (readl(base + BSEC_DISTURBED_OFF + bank) & bit)
return -EAGAIN;
else if (readl(base + BSEC_ERROR_OFF + bank) & bit)
return -ENOTSUPP;
return 0;
}
/**
* bsec_read_SR_lock() - read SR lock (Shadowing)
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: true if locked else false
*/
static bool bsec_read_SR_lock(u32 base, u32 otp)
{
return bsec_read_lock(base + BSEC_SRLOCK_OFF, otp);
}
/**
* bsec_read_SP_lock() - read SP lock (program Lock)
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: true if locked else false
*/
static bool bsec_read_SP_lock(u32 base, u32 otp)
{
return bsec_read_lock(base + BSEC_SPLOCK_OFF, otp);
}
/**
* bsec_SW_lock() - manage SW lock (Write in Shadow)
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: true if locked else false
*/
static bool bsec_read_SW_lock(u32 base, u32 otp)
{
return bsec_read_lock(base + BSEC_SWLOCK_OFF, otp);
}
/**
* bsec_power_safmem() - Activate or deactivate safmem power
* @base: base address of bsec IP
* @power: true to power up , false to power down
* Return: 0 if succeed
*/
static int bsec_power_safmem(u32 base, bool power)
{
u32 val;
u32 mask;
if (power) {
setbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
mask = BSEC_MODE_PWR_MASK;
} else {
clrbits_le32(base + BSEC_OTP_CONF_OFF, BSEC_CONF_POWER_UP);
mask = 0;
}
/* waiting loop */
return readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
val, (val & BSEC_MODE_PWR_MASK) == mask,
BSEC_TIMEOUT_US);
}
/**
* bsec_shadow_register() - copy safmen otp to bsec data
* @dev: bsec IP device
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: 0 if no error
*/
static int bsec_shadow_register(struct udevice *dev, u32 base, u32 otp)
{
u32 val;
int ret;
bool power_up = false;
/* check if shadowing of otp is locked */
if (bsec_read_SR_lock(base, otp))
dev_dbg(dev, "OTP %d is locked and refreshed with 0\n",
otp);
/* check if safemem is power up */
val = readl(base + BSEC_OTP_STATUS_OFF);
if (!(val & BSEC_MODE_PWR_MASK)) {
ret = bsec_power_safmem(base, true);
if (ret)
return ret;
power_up = true;
}
/* set BSEC_OTP_CTRL_OFF with the otp value*/
writel(otp | BSEC_READ, base + BSEC_OTP_CTRL_OFF);
/* check otp status*/
ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
val, (val & BSEC_MODE_BUSY_MASK) == 0,
BSEC_TIMEOUT_US);
if (ret)
return ret;
ret = bsec_check_error(base, otp);
if (power_up)
bsec_power_safmem(base, false);
return ret;
}
/**
* bsec_read_shadow() - read an otp data value from shadow
* @dev: bsec IP device
* @base: base address of bsec IP
* @val: read value
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: 0 if no error
*/
static int bsec_read_shadow(struct udevice *dev, u32 base, u32 *val, u32 otp)
{
*val = readl(base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
return bsec_check_error(base, otp);
}
/**
* bsec_write_shadow() - write value in BSEC data register in shadow
* @dev: bsec IP device
* @base: base address of bsec IP
* @val: value to write
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: 0 if no error
*/
static int bsec_write_shadow(struct udevice *dev, u32 base, u32 val, u32 otp)
{
/* check if programming of otp is locked */
if (bsec_read_SW_lock(base, otp))
dev_dbg(dev, "OTP %d is lock, write will be ignore\n", otp);
writel(val, base + BSEC_OTP_DATA_OFF + otp * sizeof(u32));
return bsec_check_error(base, otp);
}
/**
* bsec_program_otp() - program a bit in SAFMEM
* @dev: bsec IP device
* @base: base address of bsec IP
* @val: value to program
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* after the function the otp data is not refreshed in shadow
* Return: 0 if no error
*/
static int bsec_program_otp(struct udevice *dev, long base, u32 val, u32 otp)
{
u32 ret;
bool power_up = false;
if (bsec_read_SP_lock(base, otp))
dev_dbg(dev, "OTP %d locked, prog will be ignore\n", otp);
if (readl(base + BSEC_OTP_LOCK_OFF) & (1 << BSEC_LOCK_PROGRAM))
dev_dbg(dev, "Global lock, prog will be ignore\n");
/* check if safemem is power up */
if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
ret = bsec_power_safmem(base, true);
if (ret)
return ret;
power_up = true;
}
/* set value in write register*/
writel(val, base + BSEC_OTP_WRDATA_OFF);
/* set BSEC_OTP_CTRL_OFF with the otp value */
writel(otp | BSEC_WRITE, base + BSEC_OTP_CTRL_OFF);
/* check otp status*/
ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
val, (val & BSEC_MODE_BUSY_MASK) == 0,
BSEC_TIMEOUT_US);
if (ret)
return ret;
if (val & BSEC_MODE_PROGFAIL_MASK)
ret = -EACCES;
else
ret = bsec_check_error(base, otp);
if (power_up)
bsec_power_safmem(base, false);
return ret;
}
/**
* bsec_permanent_lock_otp() - permanent lock of OTP in SAFMEM
* @dev: bsec IP device
* @base: base address of bsec IP
* @otp: otp number (0 - BSEC_OTP_MAX_VALUE)
* Return: 0 if no error
*/
static int bsec_permanent_lock_otp(struct udevice *dev, long base, uint32_t otp)
{
int ret;
bool power_up = false;
u32 val, addr;
/* check if safemem is power up */
if (!(readl(base + BSEC_OTP_STATUS_OFF) & BSEC_MODE_PWR_MASK)) {
ret = bsec_power_safmem(base, true);
if (ret)
return ret;
power_up = true;
}
/*
* low OTPs = 2 bits word for low OTPs, 1 bits per word for upper OTP
* and only 16 bits used in WRDATA
*/
if (otp < BSEC_OTP_UPPER_START) {
addr = otp / 8;
val = 0x03 << ((otp * 2) & 0xF);
} else {
addr = BSEC_OTP_UPPER_START / 8 +
((otp - BSEC_OTP_UPPER_START) / 16);
val = 0x01 << (otp & 0xF);
}
/* set value in write register*/
writel(val, base + BSEC_OTP_WRDATA_OFF);
/* set BSEC_OTP_CTRL_OFF with the otp addr and lock request*/
writel(addr | BSEC_WRITE | BSEC_LOCK, base + BSEC_OTP_CTRL_OFF);
/* check otp status*/
ret = readl_poll_timeout(base + BSEC_OTP_STATUS_OFF,
val, (val & BSEC_MODE_BUSY_MASK) == 0,
BSEC_TIMEOUT_US);
if (ret)
return ret;
if (val & BSEC_MODE_PROGFAIL_MASK)
ret = -EACCES;
else
ret = bsec_check_error(base, otp);
if (power_up)
bsec_power_safmem(base, false);
return ret;
}
/* BSEC MISC driver *******************************************************/
struct stm32mp_bsec_plat {
u32 base;
};
struct stm32mp_bsec_priv {
struct udevice *tee;
};
static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp)
{
struct stm32mp_bsec_plat *plat;
u32 tmp_data = 0;
int ret;
if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
return stm32_smc(STM32_SMC_BSEC,
STM32_SMC_READ_OTP,
otp, 0, val);
plat = dev_get_plat(dev);
/* read current shadow value */
ret = bsec_read_shadow(dev, plat->base, &tmp_data, otp);
if (ret)
return ret;
/* copy otp in shadow */
ret = bsec_shadow_register(dev, plat->base, otp);
if (ret)
return ret;
ret = bsec_read_shadow(dev, plat->base, val, otp);
if (ret)
return ret;
/* restore shadow value */
ret = bsec_write_shadow(dev, plat->base, tmp_data, otp);
return ret;
}
static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp)
{
struct stm32mp_bsec_plat *plat;
if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
return stm32_smc(STM32_SMC_BSEC,
STM32_SMC_READ_SHADOW,
otp, 0, val);
plat = dev_get_plat(dev);
return bsec_read_shadow(dev, plat->base, val, otp);
}
static int stm32mp_bsec_read_lock(struct udevice *dev, u32 *val, u32 otp)
{
struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
u32 wrlock;
/* return OTP permanent write lock status */
wrlock = bsec_read_lock(plat->base + BSEC_WRLOCK_OFF, otp);
*val = 0;
if (wrlock)
*val = BSEC_LOCK_PERM;
return 0;
}
static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp)
{
struct stm32mp_bsec_plat *plat;
if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
return stm32_smc_exec(STM32_SMC_BSEC,
STM32_SMC_PROG_OTP,
otp, val);
plat = dev_get_plat(dev);
return bsec_program_otp(dev, plat->base, val, otp);
}
static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp)
{
struct stm32mp_bsec_plat *plat;
if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
return stm32_smc_exec(STM32_SMC_BSEC,
STM32_SMC_WRITE_SHADOW,
otp, val);
plat = dev_get_plat(dev);
return bsec_write_shadow(dev, plat->base, val, otp);
}
static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp)
{
struct stm32mp_bsec_plat *plat;
/* only permanent write lock is supported in U-Boot */
if (!(val & BSEC_LOCK_PERM)) {
dev_dbg(dev, "lock option without BSEC_LOCK_PERM: %x\n", val);
return 0; /* nothing to do */
}
if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD))
return stm32_smc_exec(STM32_SMC_BSEC,
STM32_SMC_WRLOCK_OTP,
otp, 0);
plat = dev_get_plat(dev);
return bsec_permanent_lock_otp(dev, plat->base, otp);
}
static int bsec_pta_open_session(struct udevice *tee, u32 *tee_session)
{
const struct tee_optee_ta_uuid uuid = PTA_BSEC_UUID;
struct tee_open_session_arg arg;
int rc;
memset(&arg, 0, sizeof(arg));
tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
arg.clnt_login = TEE_LOGIN_REE_KERNEL;
rc = tee_open_session(tee, &arg, 0, NULL);
if (rc < 0)
return -ENODEV;
*tee_session = arg.session;
return 0;
}
static int bsec_optee_open(struct udevice *dev)
{
struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
struct udevice *tee;
u32 tee_session;
int rc;
tee = tee_find_device(NULL, NULL, NULL, NULL);
if (!tee)
return -ENODEV;
/* try to open the STM32 BSEC TA */
rc = bsec_pta_open_session(tee, &tee_session);
if (rc)
return rc;
tee_close_session(tee, tee_session);
priv->tee = tee;
return 0;
}
static int bsec_optee_pta(struct udevice *dev, int cmd, int type, int offset,
void *buff, ulong size)
{
struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
u32 tee_session;
struct tee_invoke_arg arg;
struct tee_param param[2];
struct tee_shm *fw_shm;
int rc;
rc = bsec_pta_open_session(priv->tee, &tee_session);
if (rc)
return rc;
rc = tee_shm_register(priv->tee, buff, size, 0, &fw_shm);
if (rc)
goto close_session;
memset(&arg, 0, sizeof(arg));
arg.func = cmd;
arg.session = tee_session;
memset(param, 0, sizeof(param));
param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT;
param[0].u.value.a = offset;
param[0].u.value.b = type;
if (cmd == PTA_BSEC_WRITE_MEM)
param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT;
else
param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
param[1].u.memref.shm = fw_shm;
param[1].u.memref.size = size;
rc = tee_invoke_func(priv->tee, &arg, 2, param);
if (rc < 0 || arg.ret != 0) {
dev_err(priv->tee,
"PTA_BSEC invoke failed TEE err: %x, err:%x\n",
arg.ret, rc);
if (!rc)
rc = -EIO;
}
tee_shm_free(fw_shm);
close_session:
tee_close_session(priv->tee, tee_session);
return rc;
}
static int stm32mp_bsec_read(struct udevice *dev, int offset,
void *buf, int size)
{
struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
int ret;
int i;
bool shadow = true, lock = false;
int nb_otp = size / sizeof(u32);
int otp, cmd;
unsigned int offs = offset;
if (offs >= STM32_BSEC_LOCK_OFFSET) {
offs -= STM32_BSEC_LOCK_OFFSET;
lock = true;
} else if (offs >= STM32_BSEC_OTP_OFFSET) {
offs -= STM32_BSEC_OTP_OFFSET;
shadow = false;
}
if ((offs % 4) || (size % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
cmd = FUSE_ACCESS;
if (shadow)
cmd = SHADOW_ACCESS;
if (lock)
cmd = LOCK_ACCESS;
ret = bsec_optee_pta(dev, PTA_BSEC_READ_MEM, cmd, offs, buf, size);
if (ret)
return ret;
return size;
}
otp = offs / sizeof(u32);
for (i = otp; i < (otp + nb_otp) && i <= BSEC_OTP_MAX_VALUE; i++) {
u32 *addr = &((u32 *)buf)[i - otp];
if (lock)
ret = stm32mp_bsec_read_lock(dev, addr, i);
else if (shadow)
ret = stm32mp_bsec_read_shadow(dev, addr, i);
else
ret = stm32mp_bsec_read_otp(dev, addr, i);
if (ret)
break;
}
if (ret)
return ret;
else
return (i - otp) * 4;
}
static int stm32mp_bsec_write(struct udevice *dev, int offset,
const void *buf, int size)
{
struct stm32mp_bsec_priv *priv = dev_get_priv(dev);
int ret = 0;
int i;
bool shadow = true, lock = false;
int nb_otp = size / sizeof(u32);
int otp, cmd;
unsigned int offs = offset;
if (offs >= STM32_BSEC_LOCK_OFFSET) {
offs -= STM32_BSEC_LOCK_OFFSET;
lock = true;
} else if (offs >= STM32_BSEC_OTP_OFFSET) {
offs -= STM32_BSEC_OTP_OFFSET;
shadow = false;
}
if ((offs % 4) || (size % 4))
return -EINVAL;
if (IS_ENABLED(CONFIG_OPTEE) && priv->tee) {
cmd = FUSE_ACCESS;
if (shadow)
cmd = SHADOW_ACCESS;
if (lock)
cmd = LOCK_ACCESS;
ret = bsec_optee_pta(dev, PTA_BSEC_WRITE_MEM, cmd, offs, (void *)buf, size);
if (ret)
return ret;
return size;
}
otp = offs / sizeof(u32);
for (i = otp; i < otp + nb_otp && i <= BSEC_OTP_MAX_VALUE; i++) {
u32 *val = &((u32 *)buf)[i - otp];
if (lock)
ret = stm32mp_bsec_write_lock(dev, *val, i);
else if (shadow)
ret = stm32mp_bsec_write_shadow(dev, *val, i);
else
ret = stm32mp_bsec_write_otp(dev, *val, i);
if (ret)
break;
}
if (ret)
return ret;
else
return (i - otp) * 4;
}
static const struct misc_ops stm32mp_bsec_ops = {
.read = stm32mp_bsec_read,
.write = stm32mp_bsec_write,
};
static int stm32mp_bsec_of_to_plat(struct udevice *dev)
{
struct stm32mp_bsec_plat *plat = dev_get_plat(dev);
plat->base = (u32)dev_read_addr_ptr(dev);
return 0;
}
static int stm32mp_bsec_probe(struct udevice *dev)
{
int otp;
struct stm32mp_bsec_plat *plat;
struct clk_bulk clk_bulk;
int ret;
ret = clk_get_bulk(dev, &clk_bulk);
if (!ret) {
ret = clk_enable_bulk(&clk_bulk);
if (ret)
return ret;
}
if (IS_ENABLED(CONFIG_OPTEE))
bsec_optee_open(dev);
/*
* update unlocked shadow for OTP cleared by the rom code
* only executed in SPL, it is done in TF-A for TFABOOT
*/
if (IS_ENABLED(CONFIG_SPL_BUILD)) {
plat = dev_get_plat(dev);
for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++)
if (!bsec_read_SR_lock(plat->base, otp))
bsec_shadow_register(dev, plat->base, otp);
}
return 0;
}
static const struct udevice_id stm32mp_bsec_ids[] = {
{ .compatible = "st,stm32mp13-bsec" },
{ .compatible = "st,stm32mp15-bsec" },
{}
};
U_BOOT_DRIVER(stm32mp_bsec) = {
.name = "stm32mp_bsec",
.id = UCLASS_MISC,
.of_match = stm32mp_bsec_ids,
.of_to_plat = stm32mp_bsec_of_to_plat,
.plat_auto = sizeof(struct stm32mp_bsec_plat),
.priv_auto = sizeof(struct stm32mp_bsec_priv),
.ops = &stm32mp_bsec_ops,
.probe = stm32mp_bsec_probe,
};
bool bsec_dbgswenable(void)
{
struct udevice *dev;
struct stm32mp_bsec_plat *plat;
int ret;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_DRIVER_GET(stm32mp_bsec), &dev);
if (ret || !dev) {
log_debug("bsec driver not available\n");
return false;
}
plat = dev_get_plat(dev);
if (readl(plat->base + BSEC_DENABLE_OFF) & BSEC_DENABLE_DBGSWENABLE)
return true;
return false;
}
u32 get_otp(int index, int shift, int mask)
{
int ret;
struct udevice *dev;
u32 otp = 0;
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_DRIVER_GET(stm32mp_bsec),
&dev);
if (!ret)
ret = misc_read(dev, STM32_BSEC_SHADOW(index),
&otp, sizeof(otp));
return (otp >> shift) & mask;
}