u-boot/include/configs/tegra-common.h
Tom Rini 6f6b7cfa89 Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX

We have existing entries for this option in a number of places, with
different guards on them.  They're also sometimes used for things not
directly inside of the serial driver.  First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it.  Next, consolidate all of these into the single entry in
drivers/serial/Kconfig.  Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-16 10:28:52 -04:00

96 lines
2.5 KiB
C

/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA_COMMON_H_
#define _TEGRA_COMMON_H_
#include <linux/sizes.h>
#include <linux/stringify.h>
/*
* High Level Configuration Options
*/
#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
#include <asm/arch/tegra.h> /* get chip and board defs */
/* Use the Tegra US timer on ARMv7, but the architected timer on ARMv8. */
#ifndef CONFIG_ARM64
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
#endif
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/* Environment */
#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
/*
* NS16550 Configuration
*/
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
* Common HW configuration.
* If this varies between SoCs later, move to tegraNN-common.h
* Note: This is number of devices, not max device ID.
*/
#define CONFIG_SYS_MMC_MAX_DEVICE 4
/*
* select serial console configuration
*/
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* turn on command-line edit/hist/auto */
/*
* Increasing the size of the IO buffer as default nfsargs size is more
* than 256 and so it is not possible to edit it
*/
#define CONFIG_SYS_CBSIZE (1024 * 2) /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 64 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
#ifndef CONFIG_ARM64
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#endif
#ifndef CONFIG_ARM64
/* Defines for SPL */
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
#endif
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#endif /* _TEGRA_COMMON_H_ */