mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 12:45:42 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
264 lines
6.7 KiB
C
264 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* From Coreboot northbridge/intel/sandybridge/northbridge.c
|
|
*
|
|
* Copyright (C) 2007-2009 coresystems GmbH
|
|
* Copyright (C) 2011 The Chromium Authors
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/msr.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/intel_regs.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/arch/model_206ax.h>
|
|
#include <asm/arch/sandybridge.h>
|
|
#include <linux/delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int bridge_silicon_revision(struct udevice *dev)
|
|
{
|
|
struct cpuid_result result;
|
|
u16 bridge_id;
|
|
u8 stepping;
|
|
|
|
result = cpuid(1);
|
|
stepping = result.eax & 0xf;
|
|
dm_pci_read_config16(dev, PCI_DEVICE_ID, &bridge_id);
|
|
bridge_id &= 0xf0;
|
|
return bridge_id | stepping;
|
|
}
|
|
|
|
static int get_pcie_bar(struct udevice *dev, u32 *base, u32 *len)
|
|
{
|
|
u32 pciexbar_reg;
|
|
|
|
*base = 0;
|
|
*len = 0;
|
|
|
|
dm_pci_read_config32(dev, PCIEXBAR, &pciexbar_reg);
|
|
|
|
if (!(pciexbar_reg & (1 << 0)))
|
|
return 0;
|
|
|
|
switch ((pciexbar_reg >> 1) & 3) {
|
|
case 0: /* 256MB */
|
|
*base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
|
|
(1 << 28));
|
|
*len = 256 * 1024 * 1024;
|
|
return 1;
|
|
case 1: /* 128M */
|
|
*base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
|
|
(1 << 28) | (1 << 27));
|
|
*len = 128 * 1024 * 1024;
|
|
return 1;
|
|
case 2: /* 64M */
|
|
*base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
|
|
(1 << 28) | (1 << 27) | (1 << 26));
|
|
*len = 64 * 1024 * 1024;
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void add_fixed_resources(struct udevice *dev, int index)
|
|
{
|
|
u32 pcie_config_base, pcie_config_size;
|
|
|
|
if (get_pcie_bar(dev, &pcie_config_base, &pcie_config_size)) {
|
|
debug("Adding PCIe config bar base=0x%08x size=0x%x\n",
|
|
pcie_config_base, pcie_config_size);
|
|
}
|
|
}
|
|
|
|
static void northbridge_dmi_init(struct udevice *dev, int rev)
|
|
{
|
|
/* Clear error status bits */
|
|
writel(0xffffffff, DMIBAR_REG(0x1c4));
|
|
writel(0xffffffff, DMIBAR_REG(0x1d0));
|
|
|
|
/* Steps prior to DMI ASPM */
|
|
if ((rev & BASE_REV_MASK) == BASE_REV_SNB) {
|
|
clrsetbits_le32(DMIBAR_REG(0x250), (1 << 22) | (1 << 20),
|
|
1 << 21);
|
|
}
|
|
|
|
setbits_le32(DMIBAR_REG(0x238), 1 << 29);
|
|
|
|
if (rev >= SNB_STEP_D0) {
|
|
setbits_le32(DMIBAR_REG(0x1f8), 1 << 16);
|
|
} else if (rev >= SNB_STEP_D1) {
|
|
clrsetbits_le32(DMIBAR_REG(0x1f8), 1 << 26, 1 << 16);
|
|
setbits_le32(DMIBAR_REG(0x1fc), (1 << 12) | (1 << 23));
|
|
}
|
|
|
|
/* Enable ASPM on SNB link, should happen before PCH link */
|
|
if ((rev & BASE_REV_MASK) == BASE_REV_SNB)
|
|
setbits_le32(DMIBAR_REG(0xd04), 1 << 4);
|
|
|
|
setbits_le32(DMIBAR_REG(0x88), (1 << 1) | (1 << 0));
|
|
}
|
|
|
|
static void northbridge_init(struct udevice *dev, int rev)
|
|
{
|
|
u32 bridge_type;
|
|
|
|
add_fixed_resources(dev, 6);
|
|
northbridge_dmi_init(dev, rev);
|
|
|
|
bridge_type = readl(MCHBAR_REG(0x5f10));
|
|
bridge_type &= ~0xff;
|
|
|
|
if ((rev & BASE_REV_MASK) == BASE_REV_IVB) {
|
|
/* Enable Power Aware Interrupt Routing - fixed priority */
|
|
clrsetbits_8(MCHBAR_REG(0x5418), 0xf, 0x4);
|
|
|
|
/* 30h for IvyBridge */
|
|
bridge_type |= 0x30;
|
|
} else {
|
|
/* 20h for Sandybridge */
|
|
bridge_type |= 0x20;
|
|
}
|
|
writel(bridge_type, MCHBAR_REG(0x5f10));
|
|
|
|
/*
|
|
* Set bit 0 of BIOS_RESET_CPL to indicate to the CPU
|
|
* that BIOS has initialized memory and power management
|
|
*/
|
|
setbits_8(MCHBAR_REG(BIOS_RESET_CPL), 1);
|
|
debug("Set BIOS_RESET_CPL\n");
|
|
|
|
/* Configure turbo power limits 1ms after reset complete bit */
|
|
mdelay(1);
|
|
set_power_limits(28);
|
|
|
|
/*
|
|
* CPUs with configurable TDP also need power limits set
|
|
* in MCHBAR. Use same values from MSR_PKG_POWER_LIMIT.
|
|
*/
|
|
if (cpu_ivybridge_config_tdp_levels()) {
|
|
msr_t msr = msr_read(MSR_PKG_POWER_LIMIT);
|
|
|
|
writel(msr.lo, MCHBAR_REG(0x59A0));
|
|
writel(msr.hi, MCHBAR_REG(0x59A4));
|
|
}
|
|
|
|
/* Set here before graphics PM init */
|
|
writel(0x00100001, MCHBAR_REG(0x5500));
|
|
}
|
|
|
|
static void sandybridge_setup_northbridge_bars(struct udevice *dev)
|
|
{
|
|
/* Set up all hardcoded northbridge BARs */
|
|
debug("Setting up static registers\n");
|
|
dm_pci_write_config32(dev, EPBAR, DEFAULT_EPBAR | 1);
|
|
dm_pci_write_config32(dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
|
|
dm_pci_write_config32(dev, MCHBAR, MCH_BASE_ADDRESS | 1);
|
|
dm_pci_write_config32(dev, MCHBAR + 4, (0LL + MCH_BASE_ADDRESS) >> 32);
|
|
/* 64MB - busses 0-63 */
|
|
dm_pci_write_config32(dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
|
|
dm_pci_write_config32(dev, PCIEXBAR + 4,
|
|
(0LL + DEFAULT_PCIEXBAR) >> 32);
|
|
dm_pci_write_config32(dev, DMIBAR, DEFAULT_DMIBAR | 1);
|
|
dm_pci_write_config32(dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
|
|
|
|
/* Set C0000-FFFFF to access RAM on both reads and writes */
|
|
dm_pci_write_config8(dev, PAM0, 0x30);
|
|
dm_pci_write_config8(dev, PAM1, 0x33);
|
|
dm_pci_write_config8(dev, PAM2, 0x33);
|
|
dm_pci_write_config8(dev, PAM3, 0x33);
|
|
dm_pci_write_config8(dev, PAM4, 0x33);
|
|
dm_pci_write_config8(dev, PAM5, 0x33);
|
|
dm_pci_write_config8(dev, PAM6, 0x33);
|
|
}
|
|
|
|
/**
|
|
* sandybridge_init_iommu() - Set up IOMMU so that azalia can be used
|
|
*
|
|
* It is not obvious where these values come from. They may be undocumented.
|
|
*/
|
|
static void sandybridge_init_iommu(struct udevice *dev)
|
|
{
|
|
u32 capid0_a;
|
|
|
|
dm_pci_read_config32(dev, 0xe4, &capid0_a);
|
|
if (capid0_a & (1 << 23)) {
|
|
log_debug("capid0_a not needed\n");
|
|
return;
|
|
}
|
|
|
|
/* setup BARs */
|
|
writel(IOMMU_BASE1 >> 32, MCHBAR_REG(0x5404));
|
|
writel(IOMMU_BASE1 | 1, MCHBAR_REG(0x5400));
|
|
writel(IOMMU_BASE2 >> 32, MCHBAR_REG(0x5414));
|
|
writel(IOMMU_BASE2 | 1, MCHBAR_REG(0x5410));
|
|
|
|
/* lock policies */
|
|
writel(0x80000000, IOMMU_BASE1 + 0xff0);
|
|
|
|
/* Enable azalia sound */
|
|
writel(0x20000000, IOMMU_BASE2 + 0xff0);
|
|
writel(0xa0000000, IOMMU_BASE2 + 0xff0);
|
|
}
|
|
|
|
static int bd82x6x_northbridge_early_init(struct udevice *dev)
|
|
{
|
|
const int chipset_type = SANDYBRIDGE_MOBILE;
|
|
u32 capid0_a;
|
|
u8 reg8;
|
|
|
|
/* Device ID Override Enable should be done very early */
|
|
dm_pci_read_config32(dev, 0xe4, &capid0_a);
|
|
if (capid0_a & (1 << 10)) {
|
|
dm_pci_read_config8(dev, 0xf3, ®8);
|
|
reg8 &= ~7; /* Clear 2:0 */
|
|
|
|
if (chipset_type == SANDYBRIDGE_MOBILE)
|
|
reg8 |= 1; /* Set bit 0 */
|
|
|
|
dm_pci_write_config8(dev, 0xf3, reg8);
|
|
}
|
|
|
|
sandybridge_setup_northbridge_bars(dev);
|
|
|
|
/* Setup IOMMU BARs */
|
|
sandybridge_init_iommu(dev);
|
|
|
|
/* Device Enable */
|
|
dm_pci_write_config32(dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd82x6x_northbridge_probe(struct udevice *dev)
|
|
{
|
|
int rev;
|
|
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
return bd82x6x_northbridge_early_init(dev);
|
|
|
|
rev = bridge_silicon_revision(dev);
|
|
northbridge_init(dev, rev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id bd82x6x_northbridge_ids[] = {
|
|
{ .compatible = "intel,bd82x6x-northbridge" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(bd82x6x_northbridge_drv) = {
|
|
.name = "bd82x6x_northbridge",
|
|
.id = UCLASS_NORTHBRIDGE,
|
|
.of_match = bd82x6x_northbridge_ids,
|
|
.probe = bd82x6x_northbridge_probe,
|
|
};
|