mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
700a0c648d
Old, obsolete and duplicated code was cleaned up and replace by the new partitioning method. There are two possible approaches now: * define a single, static partition * use mtdparts command line option and dynamic partitioning Default is static partitioning.
849 lines
21 KiB
C
849 lines
21 KiB
C
/*
|
|
* (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* (C) 2003 August Hoeraendl, Logotronic GmbH
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#undef CONFIG_FLASH_16BIT
|
|
|
|
#include <common.h>
|
|
|
|
#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
|
|
#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
/*
|
|
* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
|
|
* has nothing to do with the flash chip being 8-bit or 16-bit.
|
|
*/
|
|
#ifdef CONFIG_FLASH_16BIT
|
|
typedef unsigned short FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned short FLASH_PORT_WIDTHV;
|
|
|
|
#define FLASH_ID_MASK 0xFFFF
|
|
#else
|
|
typedef unsigned long FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned long FLASH_PORT_WIDTHV;
|
|
|
|
#define FLASH_ID_MASK 0xFFFFFFFF
|
|
#endif
|
|
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define ORMASK(size) ((-size) & OR_AM_MSK)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
#if 0
|
|
static ulong flash_get_size(FPWV * addr, flash_info_t * info);
|
|
static void flash_get_offsets(ulong base, flash_info_t * info);
|
|
#endif
|
|
static void flash_reset(flash_info_t * info);
|
|
static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
|
|
static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
|
|
#define write_word(in, de, da) write_word_amd(in, de, da)
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
static void flash_sync_real_protect(flash_info_t * info);
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* flash_init()
|
|
*
|
|
* sets up flash_info and returns size of FLASH (bytes)
|
|
*/
|
|
ulong
|
|
flash_init(void)
|
|
{
|
|
int i, j;
|
|
ulong size = 0;
|
|
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
|
|
ulong flashbase = 0;
|
|
flash_info[i].flash_id =
|
|
(FLASH_MAN_AMD & FLASH_VENDMASK) |
|
|
(FLASH_AM640U & FLASH_TYPEMASK);
|
|
flash_info[i].size = FLASH_BANK_SIZE;
|
|
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
|
|
memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
|
|
switch (i) {
|
|
case 0:
|
|
flashbase = MX1FS2_FLASH_BASE;
|
|
break;
|
|
default:
|
|
panic("configured too many flash banks!\n");
|
|
break;
|
|
}
|
|
for (j = 0; j < flash_info[i].sector_count; j++) {
|
|
flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
|
|
}
|
|
size += flash_info[i].size;
|
|
}
|
|
|
|
/* Protect monitor and environment sectors */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_FLASH_BASE,
|
|
CFG_FLASH_BASE + _bss_start - _armboot_start,
|
|
&flash_info[0]);
|
|
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR,
|
|
CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void
|
|
flash_reset(flash_info_t * info)
|
|
{
|
|
FPWV *base = (FPWV *) (info->start[0]);
|
|
|
|
/* Put FLASH back in read mode */
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
|
|
*base = (FPW) 0x00FF00FF; /* Intel Read Mode */
|
|
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
|
|
*base = (FPW) 0x00F000F0; /* AMD Read Mode */
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
#if 0
|
|
static void
|
|
flash_get_offsets(ulong base, flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
/* set up sector start address table */
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
|
|
&& (info->flash_id & FLASH_BTYPE)) {
|
|
int bootsect_size; /* number of bytes/boot sector */
|
|
int sect_size; /* number of bytes/regular sector */
|
|
|
|
bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
|
|
sect_size = 0x00010000 * (sizeof (FPW) / 2);
|
|
|
|
/* set sector offsets for bottom boot block type */
|
|
for (i = 0; i < 8; ++i) {
|
|
info->start[i] = base + (i * bootsect_size);
|
|
}
|
|
for (i = 8; i < info->sector_count; i++) {
|
|
info->start[i] = base + ((i - 7) * sect_size);
|
|
}
|
|
} else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
|
|
&& (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
|
|
|
|
int sect_size; /* number of bytes/sector */
|
|
|
|
sect_size = 0x00010000 * (sizeof (FPW) / 2);
|
|
|
|
/* set up sector start address table (uniform sector type) */
|
|
for (i = 0; i < info->sector_count; i++)
|
|
info->start[i] = base + (i * sect_size);
|
|
}
|
|
}
|
|
#endif /* 0 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
void
|
|
flash_print_info(flash_info_t * info)
|
|
{
|
|
int i;
|
|
uchar *boottype;
|
|
uchar *bootletter;
|
|
uchar *fmt;
|
|
uchar botbootletter[] = "B";
|
|
uchar topbootletter[] = "T";
|
|
uchar botboottype[] = "bottom boot sector";
|
|
uchar topboottype[] = "top boot sector";
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD:
|
|
printf("AMD ");
|
|
break;
|
|
case FLASH_MAN_BM:
|
|
printf("BRIGHT MICRO ");
|
|
break;
|
|
case FLASH_MAN_FUJ:
|
|
printf("FUJITSU ");
|
|
break;
|
|
case FLASH_MAN_SST:
|
|
printf("SST ");
|
|
break;
|
|
case FLASH_MAN_STM:
|
|
printf("STM ");
|
|
break;
|
|
case FLASH_MAN_INTEL:
|
|
printf("INTEL ");
|
|
break;
|
|
default:
|
|
printf("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
/* check for top or bottom boot, if it applies */
|
|
if (info->flash_id & FLASH_BTYPE) {
|
|
boottype = botboottype;
|
|
bootletter = botbootletter;
|
|
} else {
|
|
boottype = topboottype;
|
|
bootletter = topbootletter;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_AM640U:
|
|
fmt = "29LV641D (64 Mbit, uniform sectors)\n";
|
|
break;
|
|
case FLASH_28F800C3B:
|
|
case FLASH_28F800C3T:
|
|
fmt = "28F800C3%s (8 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_INTEL800B:
|
|
case FLASH_INTEL800T:
|
|
fmt = "28F800B3%s (8 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_28F160C3B:
|
|
case FLASH_28F160C3T:
|
|
fmt = "28F160C3%s (16 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_INTEL160B:
|
|
case FLASH_INTEL160T:
|
|
fmt = "28F160B3%s (16 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_28F320C3B:
|
|
case FLASH_28F320C3T:
|
|
fmt = "28F320C3%s (32 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_INTEL320B:
|
|
case FLASH_INTEL320T:
|
|
fmt = "28F320B3%s (32 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_28F640C3B:
|
|
case FLASH_28F640C3T:
|
|
fmt = "28F640C3%s (64 Mbit, %s)\n";
|
|
break;
|
|
case FLASH_INTEL640B:
|
|
case FLASH_INTEL640T:
|
|
fmt = "28F640B3%s (64 Mbit, %s)\n";
|
|
break;
|
|
default:
|
|
fmt = "Unknown Chip Type\n";
|
|
break;
|
|
}
|
|
|
|
printf(fmt, bootletter, boottype);
|
|
|
|
printf(" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20, info->sector_count);
|
|
|
|
printf(" Sector Start Addresses:");
|
|
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0) {
|
|
printf("\n ");
|
|
}
|
|
|
|
printf(" %08lX%s", info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
|
|
printf("\n");
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
|
|
#if 0
|
|
ulong
|
|
flash_get_size(FPWV * addr, flash_info_t * info)
|
|
{
|
|
/* Write auto select command: read Manufacturer ID */
|
|
|
|
/* Write auto select command sequence and test FLASH answer */
|
|
addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
|
|
addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
|
|
addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
|
|
|
|
/* The manufacturer codes are only 1 byte, so just use 1 byte.
|
|
* This works for any bus width and any FLASH device width.
|
|
*/
|
|
switch (addr[0] & 0xff) {
|
|
|
|
case (uchar) AMD_MANUFACT:
|
|
info->flash_id = FLASH_MAN_AMD;
|
|
break;
|
|
|
|
case (uchar) INTEL_MANUFACT:
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
break;
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
break;
|
|
}
|
|
|
|
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
|
|
if (info->flash_id != FLASH_UNKNOWN)
|
|
switch (addr[1]) {
|
|
|
|
case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
|
|
info->flash_id += FLASH_AM640U;
|
|
info->sector_count = 128;
|
|
info->size = 0x00800000 * (sizeof (FPW) / 2);
|
|
break; /* => 8 or 16 MB */
|
|
|
|
case (FPW) INTEL_ID_28F800C3B:
|
|
info->flash_id += FLASH_28F800C3B;
|
|
info->sector_count = 23;
|
|
info->size = 0x00100000 * (sizeof (FPW) / 2);
|
|
break; /* => 1 or 2 MB */
|
|
|
|
case (FPW) INTEL_ID_28F800B3B:
|
|
info->flash_id += FLASH_INTEL800B;
|
|
info->sector_count = 23;
|
|
info->size = 0x00100000 * (sizeof (FPW) / 2);
|
|
break; /* => 1 or 2 MB */
|
|
|
|
case (FPW) INTEL_ID_28F160C3B:
|
|
info->flash_id += FLASH_28F160C3B;
|
|
info->sector_count = 39;
|
|
info->size = 0x00200000 * (sizeof (FPW) / 2);
|
|
break; /* => 2 or 4 MB */
|
|
|
|
case (FPW) INTEL_ID_28F160B3B:
|
|
info->flash_id += FLASH_INTEL160B;
|
|
info->sector_count = 39;
|
|
info->size = 0x00200000 * (sizeof (FPW) / 2);
|
|
break; /* => 2 or 4 MB */
|
|
|
|
case (FPW) INTEL_ID_28F320C3B:
|
|
info->flash_id += FLASH_28F320C3B;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000 * (sizeof (FPW) / 2);
|
|
break; /* => 4 or 8 MB */
|
|
|
|
case (FPW) INTEL_ID_28F320B3B:
|
|
info->flash_id += FLASH_INTEL320B;
|
|
info->sector_count = 71;
|
|
info->size = 0x00400000 * (sizeof (FPW) / 2);
|
|
break; /* => 4 or 8 MB */
|
|
|
|
case (FPW) INTEL_ID_28F640C3B:
|
|
info->flash_id += FLASH_28F640C3B;
|
|
info->sector_count = 135;
|
|
info->size = 0x00800000 * (sizeof (FPW) / 2);
|
|
break; /* => 8 or 16 MB */
|
|
|
|
case (FPW) INTEL_ID_28F640B3B:
|
|
info->flash_id += FLASH_INTEL640B;
|
|
info->sector_count = 135;
|
|
info->size = 0x00800000 * (sizeof (FPW) / 2);
|
|
break; /* => 8 or 16 MB */
|
|
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
return (0); /* => no or unknown flash */
|
|
}
|
|
|
|
flash_get_offsets((ulong) addr, info);
|
|
|
|
/* Put FLASH back in read mode */
|
|
flash_reset(info);
|
|
|
|
return (info->size);
|
|
}
|
|
#endif /* 0 */
|
|
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
static void
|
|
flash_sync_real_protect(flash_info_t * info)
|
|
{
|
|
FPWV *addr = (FPWV *) (info->start[0]);
|
|
FPWV *sect;
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F800C3B:
|
|
case FLASH_28F800C3T:
|
|
case FLASH_28F160C3B:
|
|
case FLASH_28F160C3T:
|
|
case FLASH_28F320C3B:
|
|
case FLASH_28F320C3T:
|
|
case FLASH_28F640C3B:
|
|
case FLASH_28F640C3T:
|
|
/* check for protected sectors */
|
|
*addr = (FPW) 0x00900090;
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
/* read sector protection at sector address, (A7 .. A0) = 0x02.
|
|
* D0 = 1 for each device if protected.
|
|
* If at least one device is protected the sector is marked
|
|
* protected, but mixed protected and unprotected devices
|
|
* within a sector should never happen.
|
|
*/
|
|
sect = (FPWV *) (info->start[i]);
|
|
info->protect[i] =
|
|
(sect[2] & (FPW) (0x00010001)) ? 1 : 0;
|
|
}
|
|
|
|
/* Put FLASH back in read mode */
|
|
flash_reset(info);
|
|
break;
|
|
|
|
case FLASH_AM640U:
|
|
default:
|
|
/* no hardware protect that we support */
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int
|
|
flash_erase(flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
FPWV *addr;
|
|
int flag, prot, sect;
|
|
int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
|
|
ulong start, now, last;
|
|
int rcode = 0;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf("- missing\n");
|
|
} else {
|
|
printf("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_INTEL800B:
|
|
case FLASH_INTEL160B:
|
|
case FLASH_INTEL320B:
|
|
case FLASH_INTEL640B:
|
|
case FLASH_28F800C3B:
|
|
case FLASH_28F160C3B:
|
|
case FLASH_28F320C3B:
|
|
case FLASH_28F640C3B:
|
|
case FLASH_AM640U:
|
|
break;
|
|
case FLASH_UNKNOWN:
|
|
default:
|
|
printf("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf("\n");
|
|
}
|
|
|
|
start = get_timer(0);
|
|
last = start;
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
|
|
|
|
if (info->protect[sect] != 0) /* protected, skip it */
|
|
continue;
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
addr = (FPWV *) (info->start[sect]);
|
|
if (intel) {
|
|
*addr = (FPW) 0x00500050; /* clear status register */
|
|
*addr = (FPW) 0x00200020; /* erase setup */
|
|
*addr = (FPW) 0x00D000D0; /* erase confirm */
|
|
} else {
|
|
/* must be AMD style if not Intel */
|
|
FPWV *base; /* first address in bank */
|
|
|
|
base = (FPWV *) (info->start[0]);
|
|
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[0x02AA] = (FPW) 0x00550055; /* unlock */
|
|
base[0x0555] = (FPW) 0x00800080; /* erase mode */
|
|
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[0x02AA] = (FPW) 0x00550055; /* unlock */
|
|
*addr = (FPW) 0x00300030; /* erase sector */
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
/* wait at least 50us for AMD, 80us for Intel.
|
|
* Let's wait 1 ms.
|
|
*/
|
|
udelay(1000);
|
|
|
|
while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if ((now = get_timer(0)) - start > CFG_FLASH_ERASE_TOUT) {
|
|
printf("Timeout\n");
|
|
|
|
if (intel) {
|
|
/* suspend erase */
|
|
*addr = (FPW) 0x00B000B0;
|
|
}
|
|
|
|
flash_reset(info); /* reset to read mode */
|
|
rcode = 1; /* failed */
|
|
break;
|
|
}
|
|
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc('.');
|
|
last = now;
|
|
}
|
|
}
|
|
|
|
flash_reset(info); /* reset to read mode */
|
|
}
|
|
|
|
printf(" done\n");
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int
|
|
bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
|
|
int bytes; /* number of bytes to program in current word */
|
|
int left; /* number of bytes left to program */
|
|
int i, res;
|
|
|
|
for (left = cnt, res = 0;
|
|
left > 0 && res == 0;
|
|
addr += sizeof (data), left -= sizeof (data) - bytes) {
|
|
|
|
bytes = addr & (sizeof (data) - 1);
|
|
addr &= ~(sizeof (data) - 1);
|
|
|
|
/* combine source and destination data so can program
|
|
* an entire word of 16 or 32 bits
|
|
*/
|
|
for (i = 0; i < sizeof (data); i++) {
|
|
data <<= 8;
|
|
if (i < bytes || i - bytes >= left)
|
|
data += *((uchar *) addr + i);
|
|
else
|
|
data += *src++;
|
|
}
|
|
|
|
/* write one word to the flash */
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD:
|
|
res = write_word_amd(info, (FPWV *) addr, data);
|
|
break;
|
|
case FLASH_MAN_INTEL:
|
|
res = write_word_intel(info, (FPWV *) addr, data);
|
|
break;
|
|
default:
|
|
/* unknown flash type, error! */
|
|
printf("missing or unknown FLASH type\n");
|
|
res = 1; /* not really a timeout, but gives error */
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
/**
|
|
* write_buf: - Copy memory to flash.
|
|
*
|
|
* @param info:
|
|
* @param src: source of copy transaction
|
|
* @param addr: where to copy to
|
|
* @param cnt: number of bytes to copy
|
|
*
|
|
* @return error code
|
|
*/
|
|
|
|
int
|
|
write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong cp, wp;
|
|
FPW data;
|
|
int l;
|
|
int i, rc;
|
|
|
|
wp = (addr & ~1); /* get lower word aligned address */
|
|
|
|
/* handle unaligned start bytes */
|
|
if ((l = addr - wp) != 0) {
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < l; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
for (; i < 2 && cnt > 0; ++i) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
++cp;
|
|
}
|
|
for (; cnt == 0 && i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
wp += 2;
|
|
}
|
|
|
|
/* handle word aligned part */
|
|
while (cnt >= 2) {
|
|
/* data = *((vushort*)src); */
|
|
data = *((FPW *) src);
|
|
if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
|
|
return (rc);
|
|
}
|
|
src += sizeof (FPW);
|
|
wp += sizeof (FPW);
|
|
cnt -= sizeof (FPW);
|
|
}
|
|
|
|
if (cnt == 0)
|
|
return ERR_OK;
|
|
|
|
/*
|
|
* handle unaligned tail bytes
|
|
*/
|
|
data = 0;
|
|
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
|
|
data = (data >> 8) | (*src++ << 8);
|
|
--cnt;
|
|
}
|
|
for (; i < 2; ++i, ++cp) {
|
|
data = (data >> 8) | (*(uchar *) cp << 8);
|
|
}
|
|
|
|
return write_word(info, (FPWV *)wp, data);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash for AMD FLASH
|
|
* A word is 16 or 32 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int
|
|
write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
|
|
{
|
|
ulong start;
|
|
int flag;
|
|
int res = 0; /* result, assume success */
|
|
FPWV *base; /* first address in flash bank */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
base = (FPWV *) (info->start[0]);
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
|
|
base[0x02AA] = (FPW) 0x00550055; /* unlock */
|
|
base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
start = get_timer(0);
|
|
|
|
/* data polling for D7 */
|
|
while (res == 0
|
|
&& (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
|
|
if (get_timer(0) - start > CFG_FLASH_WRITE_TOUT) {
|
|
*dest = (FPW) 0x00F000F0; /* reset bank */
|
|
printf("SHA timeout\n");
|
|
res = 1;
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash for Intel FLASH
|
|
* A word is 16 or 32 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int
|
|
write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
|
|
{
|
|
ulong start;
|
|
int flag;
|
|
int res = 0; /* result, assume success */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
*dest = (FPW) 0x00500050; /* clear status register */
|
|
*dest = (FPW) 0x00FF00FF; /* make sure in read mode */
|
|
*dest = (FPW) 0x00400040; /* program setup */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
start = get_timer(0);
|
|
|
|
while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
|
|
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
|
|
*dest = (FPW) 0x00B000B0; /* Suspend program */
|
|
res = 1;
|
|
}
|
|
}
|
|
|
|
if (res == 0 && (*dest & (FPW) 0x00100010))
|
|
res = 1; /* write failed, time out error is close enough */
|
|
|
|
*dest = (FPW) 0x00500050; /* clear status register */
|
|
*dest = (FPW) 0x00FF00FF; /* make sure in read mode */
|
|
|
|
return (res);
|
|
}
|
|
|
|
#ifdef CFG_FLASH_PROTECTION
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
int
|
|
flash_real_protect(flash_info_t * info, long sector, int prot)
|
|
{
|
|
int rcode = 0; /* assume success */
|
|
FPWV *addr; /* address of sector */
|
|
FPW value;
|
|
|
|
addr = (FPWV *) (info->start[sector]);
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_28F800C3B:
|
|
case FLASH_28F800C3T:
|
|
case FLASH_28F160C3B:
|
|
case FLASH_28F160C3T:
|
|
case FLASH_28F320C3B:
|
|
case FLASH_28F320C3T:
|
|
case FLASH_28F640C3B:
|
|
case FLASH_28F640C3T:
|
|
flash_reset(info); /* make sure in read mode */
|
|
*addr = (FPW) 0x00600060L; /* lock command setup */
|
|
if (prot)
|
|
*addr = (FPW) 0x00010001L; /* lock sector */
|
|
else
|
|
*addr = (FPW) 0x00D000D0L; /* unlock sector */
|
|
flash_reset(info); /* reset to read mode */
|
|
|
|
/* now see if it really is locked/unlocked as requested */
|
|
*addr = (FPW) 0x00900090;
|
|
/* read sector protection at sector address, (A7 .. A0) = 0x02.
|
|
* D0 = 1 for each device if protected.
|
|
* If at least one device is protected the sector is marked
|
|
* protected, but return failure. Mixed protected and
|
|
* unprotected devices within a sector should never happen.
|
|
*/
|
|
value = addr[2] & (FPW) 0x00010001;
|
|
if (value == 0)
|
|
info->protect[sector] = 0;
|
|
else if (value == (FPW) 0x00010001)
|
|
info->protect[sector] = 1;
|
|
else {
|
|
/* error, mixed protected and unprotected */
|
|
rcode = 1;
|
|
info->protect[sector] = 1;
|
|
}
|
|
if (info->protect[sector] != prot)
|
|
rcode = 1; /* failed to protect/unprotect as requested */
|
|
|
|
/* reload all protection bits from hardware for now */
|
|
flash_sync_real_protect(info);
|
|
break;
|
|
|
|
case FLASH_AM640U:
|
|
default:
|
|
/* no hardware protect that we support */
|
|
info->protect[sector] = prot;
|
|
break;
|
|
}
|
|
|
|
return rcode;
|
|
}
|
|
#endif
|