mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
158 lines
5 KiB
C
158 lines
5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Stefan Roese <sr@denx.de>
|
|
*
|
|
* Configuration settings for the ProjectionDesign / Barco
|
|
* Titanium board.
|
|
*
|
|
* Based on mx6qsabrelite.h which is:
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#define CONFIG_MX6Q
|
|
|
|
/* Provide the MACH_TYPE value that the vendor kernel requires. */
|
|
#define CONFIG_MACH_TYPE 3769
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
|
|
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 4
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
|
|
|
|
#define CONFIG_HOSTNAME "titanium"
|
|
#define CONFIG_UBI_PART ubi
|
|
#define CONFIG_UBIFS_VOLUME rootfs0
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"kernel=" CONFIG_HOSTNAME "/uImage\0" \
|
|
"kernel_fs=/boot/uImage\0" \
|
|
"kernel_addr=11000000\0" \
|
|
"dtb=" CONFIG_HOSTNAME "/" \
|
|
CONFIG_HOSTNAME ".dtb\0" \
|
|
"dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \
|
|
"dtb_addr=12800000\0" \
|
|
"script=boot.scr\0" \
|
|
"uimage=uImage\0" \
|
|
"console=ttymxc0\0" \
|
|
"baudrate=115200\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcpart=1\0" \
|
|
"uimage=uImage\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
|
|
" ${script}\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; source\0" \
|
|
"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
|
|
"mmcroot=/dev/mmcblk0p2\0" \
|
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=${mmcroot} rootwait rw\0" \
|
|
"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
|
|
" ${uimage}; bootm\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addcon=setenv bootargs ${bootargs} console=ttymxc0," \
|
|
"${baudrate}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \
|
|
"part=" __stringify(CONFIG_UBI_PART) "\0" \
|
|
"boot_vol=0\0" \
|
|
"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
|
|
"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
|
|
"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
|
|
" ${filesize}\0" \
|
|
"upd_ubifs=run load_ubifs update_ubifs\0" \
|
|
"init_ubi=nand erase.part ubi;ubi part ${part};" \
|
|
"ubi create ${vol} c800000\0" \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
|
|
" addcon addmtd;" \
|
|
"bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"ubifsargs=set bootargs ubi.mtd=ubi " \
|
|
"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
|
|
"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
|
|
"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
|
|
"ubifsload ${dtb_addr} ${dtb_fs};\0" \
|
|
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
|
|
"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
|
|
"load_dtb=tftp ${dtb_addr} ${dtb}\0" \
|
|
"net_nfs=run load_dtb load_kernel; " \
|
|
"run nfsargs addip addcon addmtd;" \
|
|
"bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"delenv=env default -a -f; saveenv; reset\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND "run nand_ubifs"
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define PHYS_SDRAM_SIZE (512 << 20)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Enable NAND support */
|
|
#ifdef CONFIG_CMD_NAND
|
|
|
|
/* NAND stuff */
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/* DMA stuff, needed for GPMI/MXS NAND support */
|
|
|
|
/* Environment in NAND */
|
|
|
|
#else /* CONFIG_CMD_NAND */
|
|
|
|
/* Environment in MMC */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#endif /* CONFIG_CMD_NAND */
|
|
|
|
/* UBI/UBIFS config options */
|
|
|
|
#endif /* __CONFIG_H */
|