mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
7b5b934313
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
185 lines
4.8 KiB
C
185 lines
4.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2017-2018 NXP
|
|
* Copyright 2019 Siemens AG
|
|
*/
|
|
|
|
#ifndef __IMX8X_CAPRICORN_H
|
|
#define __IMX8X_CAPRICORN_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#include "siemens-env-common.h"
|
|
#include "siemens-ccp-common.h"
|
|
|
|
/* SPL config */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
|
|
#define CONFIG_SPL_STACK 0x013E000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x00128000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
|
|
#define CONFIG_MALLOC_F_ADDR 0x00120000
|
|
|
|
#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
#define CONFIG_FACTORYSET
|
|
|
|
#undef CONFIG_IDENT_STRING
|
|
#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07")
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* Commands */
|
|
#define CONFIG_CMD_READ
|
|
|
|
#undef CONFIG_CMD_EXPORTENV
|
|
#undef CONFIG_CMD_IMPORTENV
|
|
#undef CONFIG_CMD_IMLS
|
|
#undef CONFIG_CMD_CRC32
|
|
#undef CONFIG_BOOTM_NETBSD
|
|
|
|
/* ENET Config */
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#define FEC_QUIRK_ENET_MAC
|
|
|
|
/* ENET1 connects to base board and MUX with ESAI */
|
|
#define CONFIG_FEC_ENET_DEV 1
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
|
#define CONFIG_ETHPRIME "eth1"
|
|
|
|
/* I2C Configuration */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
/* EEPROM */
|
|
#define EEPROM_I2C_BUS 0 /* I2C0 */
|
|
#define EEPROM_I2C_ADDR 0x50
|
|
/* PCA9552 */
|
|
#define PCA9552_1_I2C_BUS 1 /* I2C1 */
|
|
#define PCA9552_1_I2C_ADDR 0x60
|
|
#endif /* !CONFIG_SPL_BUILD */
|
|
|
|
/* AHAB */
|
|
#ifdef CONFIG_AHAB_BOOT
|
|
#define AHAB_ENV "sec_boot=yes\0"
|
|
#else
|
|
#define AHAB_ENV "sec_boot=no\0"
|
|
#endif
|
|
|
|
#define MFG_ENV_SETTINGS_DEFAULT \
|
|
"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
|
|
"rdinit=/linuxrc " \
|
|
"clk_ignore_unused "\
|
|
"\0" \
|
|
"kboot=booti\0"\
|
|
"bootcmd_mfg=run mfgtool_args;" \
|
|
"if iminfo ${initrd_addr}; then " \
|
|
"if test ${tee} = yes; then " \
|
|
"bootm ${tee_addr} ${initrd_addr} ${fdt_addr}; " \
|
|
"else " \
|
|
"booti ${loadaddr} ${initrd_addr} ${fdt_addr}; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo \"Run fastboot ...\"; fastboot 0; " \
|
|
"fi;\0"
|
|
|
|
/* Boot M4 */
|
|
#define M4_BOOT_ENV \
|
|
"m4_0_image=m4_0.bin\0" \
|
|
"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} " \
|
|
"${loadaddr} ${m4_0_image}\0" \
|
|
"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
|
|
|
|
#define CONFIG_MFG_ENV_SETTINGS \
|
|
MFG_ENV_SETTINGS_DEFAULT \
|
|
"initrd_addr=0x83100000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"emmc_dev=0\0"
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_MFG_ENV_SETTINGS \
|
|
M4_BOOT_ENV \
|
|
AHAB_ENV \
|
|
ENV_COMMON \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"panel=NULL\0" \
|
|
"console=ttyLP2\0" \
|
|
"fdt_addr=0x83000000\0" \
|
|
"fdt_high=0xffffffffffffffff\0" \
|
|
"cntr_addr=0x88000000\0" \
|
|
"cntr_file=os_cntr_signed.bin\0" \
|
|
"initrd_addr=0x83800000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"netdev=eth0\0" \
|
|
"nfsopts=vers=3,udp,rsize=4096,wsize=4096,nolock rw\0" \
|
|
"hostname=capricorn\0" \
|
|
ENV_EMMC \
|
|
ENV_NET
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if usrbutton; then " \
|
|
"run flash_self_test; " \
|
|
"reset; " \
|
|
"fi;" \
|
|
"run flash_self;" \
|
|
"reset;"
|
|
|
|
/* Default location for tftp and bootm */
|
|
#define CONFIG_LOADADDR 0x80280000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
|
|
|
|
#define CONFIG_BOOTCOUNT_LIMIT
|
|
#define CONFIG_BOOTCOUNT_ENV
|
|
|
|
/* Environment organisation */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1, eMMC */
|
|
#define CONFIG_SYS_MMC_ENV_PART 2 /* 2nd boot partition */
|
|
|
|
/* On CCP board, USDHC1 is for eMMC */
|
|
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
#define PHYS_SDRAM_1 0x80000000
|
|
#define PHYS_SDRAM_2 0x880000000
|
|
/* DDR3 board total DDR is 1 GB */
|
|
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */
|
|
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0xA0000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
|
(PHYS_SDRAM_1_SIZE >> 2))
|
|
|
|
/* Console buffer and boot args */
|
|
#define CONFIG_SYS_CBSIZE 2048
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/* Generic Timer Definitions */
|
|
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
|
|
|
|
#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
|
|
#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
|
|
|
|
#endif /* __IMX8X_CAPRICORN_H */
|