mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
232 lines
7 KiB
C
232 lines
7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* Configuation settings for the AT91SAM9263EK board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#else
|
|
#define CONFIG_SYS_USE_NORFLASH
|
|
#endif
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_ATMEL_LEGACY
|
|
|
|
/* LCD */
|
|
#define LCD_BPP LCD_COLOR8
|
|
#define CONFIG_LCD_LOGO 1
|
|
#undef LCD_TEST_PATTERN
|
|
#define CONFIG_LCD_INFO 1
|
|
#define CONFIG_LCD_INFO_BELOW_LOGO 1
|
|
#define CONFIG_ATMEL_LCD 1
|
|
#define CONFIG_ATMEL_LCD_BGR555 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* NOR flash, if populated */
|
|
#ifdef CONFIG_SYS_USE_NORFLASH
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
#define CONFIG_SYS_MONITOR_SEC 1:0-3
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
|
|
"update=" \
|
|
"protect off ${monitor_base} +${filesize};" \
|
|
"erase ${monitor_base} +${filesize};" \
|
|
"cp.b ${fileaddr} ${monitor_base} ${filesize};" \
|
|
"protect on ${monitor_base} +${filesize}\0"
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define MASTER_PLL_MUL 171
|
|
#define MASTER_PLL_DIV 14
|
|
#define MASTER_PLL_OUT 3
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_MOR_VAL \
|
|
(AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
|
|
#define CONFIG_SYS_PLLAR_VAL \
|
|
(AT91_PMC_PLLAR_29 | \
|
|
AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
|
|
AT91_PMC_PLLXR_PLLCOUNT(63) | \
|
|
AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
|
|
AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
|
|
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR1_VAL \
|
|
(AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
|
|
/* PCK/2 = MCK Master Clock from PLLA */
|
|
#define CONFIG_SYS_MCKR2_VAL \
|
|
(AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
|
|
AT91_PMC_MCKR_MDIV_2)
|
|
|
|
/* define PDC[31:16] as DATA[31:16] */
|
|
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
|
|
/* no pull-up for D[31:16] */
|
|
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
|
|
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
|
|
#define CONFIG_SYS_MATRIX_EBICSA_VAL \
|
|
(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
|
|
AT91_MATRIX_CSA_EBI_CS1A)
|
|
|
|
/* SDRAM */
|
|
/* SDRAMC_MR Mode register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0
|
|
/* SDRAMC_TR - Refresh Timer register */
|
|
#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
|
|
/* SDRAMC_CR - Configuration register*/
|
|
#define CONFIG_SYS_SDRC_CR_VAL \
|
|
(AT91_SDRAMC_NC_9 | \
|
|
AT91_SDRAMC_NR_13 | \
|
|
AT91_SDRAMC_NB_4 | \
|
|
AT91_SDRAMC_CAS_3 | \
|
|
AT91_SDRAMC_DBW_32 | \
|
|
(1 << 8) | /* Write Recovery Delay */ \
|
|
(7 << 12) | /* Row Cycle Delay */ \
|
|
(2 << 16) | /* Row Precharge Delay */ \
|
|
(2 << 20) | /* Row to Column Delay */ \
|
|
(5 << 24) | /* Active to Precharge Delay */ \
|
|
(1 << 28)) /* Exit Self Refresh to Active Delay */
|
|
|
|
/* Memory Device Register -> SDRAM */
|
|
#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
|
|
#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
|
|
#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
|
|
#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
|
|
#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
|
|
#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
|
|
#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
|
|
|
|
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
|
|
#define CONFIG_SYS_SMC0_SETUP0_VAL \
|
|
(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
|
|
AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
|
|
#define CONFIG_SYS_SMC0_PULSE0_VAL \
|
|
(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
|
|
AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
|
|
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
|
|
(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
|
|
#define CONFIG_SYS_SMC0_MODE0_VAL \
|
|
(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
|
|
AT91_SMC_MODE_DBW_16 | \
|
|
AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
|
|
|
|
/* user reset enable */
|
|
#define CONFIG_SYS_RSTC_RMR_VAL \
|
|
(AT91_RSTC_KEY | \
|
|
AT91_RSTC_MR_URSTEN | \
|
|
AT91_RSTC_MR_ERSTL(15))
|
|
|
|
/* Disable Watchdog */
|
|
#define CONFIG_SYS_WDTC_WDMR_VAL \
|
|
(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
|
|
AT91_WDT_MR_WDV(0xfff) | \
|
|
AT91_WDT_MR_WDDIS | \
|
|
AT91_WDT_MR_WDD(0xfff))
|
|
|
|
#endif
|
|
#endif
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_RESET_PHY_R 1
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
|
|
#ifdef CONFIG_SYS_USE_DATAFLASH
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
#define CONFIG_BOOTCOMMAND "sf probe 0; " \
|
|
"sf read 0x22000000 0x84000 0x294000; " \
|
|
"bootm 0x22000000"
|
|
|
|
#elif CONFIG_SYS_USE_NANDFLASH
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
|
|
#endif
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
|
|
|
#endif
|