u-boot/board/w7o/errors.h
2002-03-09 21:29:25 +00:00

98 lines
4.3 KiB
C

/*
* (C) Copyright 2001
* Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ERRORS_H_
#define _ERRORS_H_
#define ERR_FF -1 /* led test value(2) */
#define ERR_00 0x0000 /* led test value(2) */
#define ERR_LED 0x01 /* led test failed (1)(3)(4) */
#define ERR_RAMG 0x04 /* start SDRAM data bus test (2) */
#define ERR_RAML 0x05 /* SDRAM data bus fault in LSW chip (5) */
#define ERR_RAMH 0x06 /* SDRAM data bus fault in MSW chip (6) */
#define ERR_RAMB 0x07 /* SDRAM data bus fault both chips (5)(6)(7) */
#define ERR_ADDG 0x08 /* start Address ghosting test (13) */
#define ERR_ADDF 0x09 /* fault during Address ghosting test (13) */
#define ERR_POST1 0x0a /* post1 tests complete */
#define ERR_TMP1 0x0b /* */
#define ERR_R55G 0x0c /* start SDRAM fill 55 test (2) */
#define ERR_R55L 0x0d /* SDRAM fill test 55 failed in LSW chip (8) */
#define ERR_R55H 0x0e /* SDRAM fill test 55 failed in MSW chip (9) */
#define ERR_R55B 0x0f /* SDRAM fill test 55 fail in both chips (10) */
#define ERR_RAAG 0x10 /* start SDRAM fill aa test (2) */
#define ERR_RAAL 0x11 /* SDRAM fill test aa failed in LSW chip (8) */
#define ERR_RAAH 0x12 /* SDRAM fill test aa failed in MSW chip (9) */
#define ERR_RAAB 0x13 /* SDRAM fill test aa fail in both chips (10) */
#define ERR_R00G 0x14 /* start SDRAM fill 00 test (2) */
#define ERR_R00L 0x15 /* SDRAM fill test 00 failed in LSW chip (8) */
#define ERR_R00H 0x16 /* SDRAM fill test 00 failed in MSW chip (9) */
#define ERR_R00B 0x17 /* SDRAM fill test 00 fail in both chips (10) */
#define ERR_RTCG 0x18 /* start RTC test */
#define ERR_RTCBAT 0x19 /* RTC battery failure */
#define ERR_RTCTIM 0x1A /* RTC invalid time/date values */
#define ERR_RTCVAL 0x1B /* RTC NVRAM not accessable */
#define ERR_FPGAG 0x20 /* fault during FPGA programming */
#define ERR_XRW1 0x21 /* Xilinx - can't read/write regs on FPGA 1 */
#define ERR_XRW2 0x22 /* Xilinx - can't read/write regs on FPGA 2 */
#define ERR_XRW3 0x23 /* Xilinx - can't read/write regs on FPGA 3 */
#define ERR_XRW4 0x24 /* Xilinx - can't read/write regs on FPGA 4 */
#define ERR_XRW5 0x25 /* Xilinx - can't read/write regs on FPGA 5 */
#define ERR_XRW6 0x26 /* Xilinx - can't read/write regs on FPGA 6 */
#define ERR_XINIT0 0x27 /* Xilinx - INIT line failed to go low */
#define ERR_XINIT1 0x28 /* Xilinx - INIT line failed to go high */
#define ERR_XDONE1 0x29 /* Xilinx - DONE line failed to go high */
#define ERR_XIMAGE 0x2A /* Xilinx - Bad FPGA image in Flash */
#define ERR_TempG 0x2b /* start temp sensor tests */
#define ERR_Tinit0 0x2C /* temp sensor 0 failed to init */
#define ERR_Tinit1 0x2D /* temp sensor 1 failed to init */
#define ERR_Ttest0 0x2E /* temp sensor 0 failed test */
#define ERR_Ttest1 0x2F /* temp sensor 1 failed test */
#define ERR_lm75r 0x30 /* temp sensor read failure */
#define ERR_lm75w 0x31 /* temp sensor write failure */
#define ERR_POSTOK 0x55 /* PANIC: psych... OK */
#if !defined(__ASSEMBLY__)
extern void log_stat(int errcode);
extern void log_warn(int errcode);
extern void log_err(int errcode);
#endif
/*
Debugging suggestions:
(1) periferal data bus shorted or crossed
(2) general processor halt, check reset, watch dog, power supply ripple, processor clock.
(3) check p_we, p_r/w, p_oe, p_rdy lines.
(4) check LED buffers
(5) check SDRAM data bus bits 16-31, check LSW SDRAM chip.
(6) check SDRAM data bus bits 0-15, check MSW SDRAM chip.
(7) check SDRAM control lines and clocks
(8) check decoupling caps, replace LSW SDRAM
(9) check decoupling caps, replace MSW SDRAM
(10)
(11)
(12)
(13) SDRAM address shorted or unconnected, check sdram caps
*/
#endif /* _ERRORS_H_ */