u-boot/include/configs/stih410-b2260.h
Patrice Chotard 5cc16d886e board: Add STMicroelectronics STiH410-B2260 support
This is a 96Board compliant board based on STiH410 SoC:
  - 1GB DDR
  - On-Board USB combo WiFi/Bluetooth RTL8723BU
    with PCB soldered antenna
  - Ethernet 1000-BaseT
  - SATA
  - HDMI
  - 2 x USB2.0 type A
  - 1 x USB2.0 type micro-AB
  - SD card slot
  - High speed connector (SD/I2C/USB interfaces)
  - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces)

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-14 20:40:21 -04:00

60 lines
1.5 KiB
C

/*
* (C) Copyright 2017
* Patrice Chotard, <patrice.chotard@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <config.h>
/* ram memory-related information */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x40000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define PHYS_SDRAM_1_SIZE 0x3FE00000
#define CONFIG_SYS_TEXT_BASE 0x7D600000
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */
/* Libraries */
#define CONFIG_MD5
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
/* Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"board= B2260" \
"load_addr= #CONFIG_SYS_LOAD_ADDR \0"
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 0x4000
/* Extra Commands */
#define CONFIG_CMD_ASKENV
#define CONFIG_SYS_LONGHELP
#define CONFIG_SETUP_MEMORY_TAGS
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN 0x1800000
#define CONFIG_SYS_GBL_DATA_SIZE 1024 /* Global data structures */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
CONFIG_SYS_MALLOC_LEN - \
CONFIG_SYS_GBL_DATA_SIZE)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* __CONFIG_H */