u-boot/arch/arm/mach-mvebu/armada8k/cpu.c
Konstantin Porotchkin 0d92f2141a arm64: mvebu: Fix A8K memory mapping and add documentation
Fix the MMU mapping for A8K device family:
 - Separate A7K and A8K memory mappings
 - Fix memory regions by including IO mapping for all
   3 PCIe interfaces existing on each connected CP110 controller
Add A8K memory mapping documentation with all regions
configured by Marvell ATF.

Change-Id: I9c930569b1853900f5fba2d5db319b092cc7a2a6
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
2016-12-21 09:52:35 +01:00

112 lines
2.9 KiB
C

/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <asm/armv8/mmu.h>
DECLARE_GLOBAL_DATA_PTR;
/* Armada 7k/8k */
#define MVEBU_RFU_BASE (MVEBU_REGISTER(0x6f0000))
#define RFU_GLOBAL_SW_RST (MVEBU_RFU_BASE + 0x84)
#define RFU_SW_RESET_OFFSET 0
/*
* The following table includes all memory regions for Armada 7k and
* 8k SoCs. The Armada 7k is missing the CP110 slave regions here. Lets
* define these regions at the beginning of the struct so that they
* can be easier removed later dynamically if an Armada 7k device is detected.
* For a detailed memory map, please see doc/mvebu/armada-8k-memory.txt
*/
#define ARMADA_7K8K_COMMON_REGIONS_START 2
static struct mm_region mvebu_mem_map[] = {
/* Armada 80x0 memory regions include the CP1 (slave) units */
{
/* SRAM, MMIO regions - CP110 slave region */
.phys = 0xf4000000UL,
.virt = 0xf4000000UL,
.size = 0x02000000UL, /* 32MiB internal registers */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
{
/* PCI CP1 regions */
.phys = 0xfa000000UL,
.virt = 0xfa000000UL,
.size = 0x04000000UL, /* 64MiB CP110 slave PCI space */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
/* Armada 80x0 and 70x0 common memory regions start here */
{
/* RAM */
.phys = 0x0UL,
.virt = 0x0UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
},
{
/* SRAM, MMIO regions - AP806 region */
.phys = 0xf0000000UL,
.virt = 0xf0000000UL,
.size = 0x01000000UL, /* 16MiB internal registers */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
{
/* SRAM, MMIO regions - CP110 master region */
.phys = 0xf2000000UL,
.virt = 0xf2000000UL,
.size = 0x02000000UL, /* 32MiB internal registers */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
{
/* PCI CP0 regions */
.phys = 0xf6000000UL,
.virt = 0xf6000000UL,
.size = 0x04000000UL, /* 64MiB CP110 master PCI space */
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE
},
{
0,
}
};
struct mm_region *mem_map = mvebu_mem_map;
void enable_caches(void)
{
/*
* Armada 7k is not equipped with the CP110 slave CP. In case this
* code runs on an Armada 7k device, lets remove the CP110 slave
* entries from the memory mapping by moving the start to the
* common regions.
*/
if (of_machine_is_compatible("marvell,armada7040"))
mem_map = &mvebu_mem_map[ARMADA_7K8K_COMMON_REGIONS_START];
icache_enable();
dcache_enable();
}
void reset_cpu(ulong ignored)
{
u32 reg;
reg = readl(RFU_GLOBAL_SW_RST);
reg &= ~(1 << RFU_SW_RESET_OFFSET);
writel(reg, RFU_GLOBAL_SW_RST);
}