mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
ec0512b173
When we think of Kconfig, we usually think of features that we like
to enable or not. Ideally, we wouldn't use Kconfig to fix a build
issue, although sometimes it might make sense. With Kconfig it's hard
to guarantee that the fix is universal. We can only say that it works
for the set of tested configurations. In the majority of cases, it's
preferable to let the linker figure things out for us.
The reverted commit attempted to fix a build issue by adding an
invisible Kconfig option. This is wrong in several ways:
It invents a new Kconfig variable when CONFIG_HASH already
exists for the same purpose.
Second, hash-checksum.c makes use of the hash_progressive_lookup_algo()
symbol, which is only provided with CONFIG_HASH, but this dependency
was not expressed in the reverted patch.
It feels like Kconfig is turning into a listing of all available
source files, and a buffet to 'select' which ones to compile. The
purpose of this revert is to enable the next change to make use of
CONFIG_HASH instead of adding to Kconfig.
This reverts commit 87316da05f.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Masahisa Kojima <masahisa.kojima@linaro.org>
764 lines
23 KiB
Text
764 lines
23 KiB
Text
menu "Library routines"
|
|
|
|
config ADDR_MAP
|
|
bool "Enable support for non-identity virtual-physical mappings"
|
|
help
|
|
Enables helper code for implementing non-identity virtual-physical
|
|
memory mappings for 32bit CPUs.
|
|
|
|
This library only works in the post-relocation phase.
|
|
|
|
config SYS_NUM_ADDR_MAP
|
|
int "Size of the address-map table"
|
|
depends on ADDR_MAP
|
|
default 16
|
|
help
|
|
Sets the number of entries in the virtual-physical mapping table.
|
|
|
|
config BCH
|
|
bool "Enable Software based BCH ECC"
|
|
help
|
|
Enables software based BCH ECC algorithm present in lib/bch.c
|
|
This is used by SoC platforms which do not have built-in ELM
|
|
hardware engine required for BCH ECC correction.
|
|
|
|
config BINMAN_FDT
|
|
bool "Allow access to binman information in the device tree"
|
|
depends on BINMAN && DM && OF_CONTROL
|
|
default y if OF_SEPARATE || OF_EMBED
|
|
help
|
|
This enables U-Boot to access information about binman entries,
|
|
stored in the device tree in a binman node. Typical uses are to
|
|
locate entries in the firmware image. See binman.h for the available
|
|
functionality.
|
|
|
|
config CC_OPTIMIZE_LIBS_FOR_SPEED
|
|
bool "Optimize libraries for speed"
|
|
help
|
|
Enabling this option will pass "-O2" to gcc when compiling
|
|
under "lib" directory.
|
|
|
|
If unsure, say N.
|
|
|
|
config DYNAMIC_CRC_TABLE
|
|
bool "Enable Dynamic tables for CRC"
|
|
help
|
|
Enable this option to calculate entries for CRC tables at runtime.
|
|
This can be helpful when reducing the size of the build image
|
|
|
|
config HAVE_ARCH_IOMAP
|
|
bool
|
|
help
|
|
Enable this option if architecture provides io{read,write}{8,16,32}
|
|
I/O accessor functions.
|
|
|
|
config HAVE_PRIVATE_LIBGCC
|
|
bool
|
|
|
|
config LIB_UUID
|
|
bool
|
|
|
|
config PRINTF
|
|
bool
|
|
default y
|
|
|
|
config SPL_PRINTF
|
|
bool
|
|
select SPL_SPRINTF
|
|
select SPL_STRTO if !SPL_USE_TINY_PRINTF
|
|
|
|
config TPL_PRINTF
|
|
bool
|
|
select TPL_SPRINTF
|
|
select TPL_STRTO if !TPL_USE_TINY_PRINTF
|
|
|
|
config SPRINTF
|
|
bool
|
|
default y
|
|
|
|
config SPL_SPRINTF
|
|
bool
|
|
|
|
config TPL_SPRINTF
|
|
bool
|
|
|
|
config SSCANF
|
|
bool
|
|
default n
|
|
|
|
config STRTO
|
|
bool
|
|
default y
|
|
|
|
config SPL_STRTO
|
|
bool
|
|
|
|
config TPL_STRTO
|
|
bool
|
|
|
|
config IMAGE_SPARSE
|
|
bool
|
|
|
|
config IMAGE_SPARSE_FILLBUF_SIZE
|
|
hex "Android sparse image CHUNK_TYPE_FILL buffer size"
|
|
default 0x80000
|
|
depends on IMAGE_SPARSE
|
|
help
|
|
Set the size of the fill buffer used when processing CHUNK_TYPE_FILL
|
|
chunks.
|
|
|
|
config USE_PRIVATE_LIBGCC
|
|
bool "Use private libgcc"
|
|
depends on HAVE_PRIVATE_LIBGCC
|
|
default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS)
|
|
help
|
|
This option allows you to use the built-in libgcc implementation
|
|
of U-Boot instead of the one provided by the compiler.
|
|
If unsure, say N.
|
|
|
|
config SYS_HZ
|
|
int
|
|
default 1000
|
|
help
|
|
The frequency of the timer returned by get_timer().
|
|
get_timer() must operate in milliseconds and this option must be
|
|
set to 1000.
|
|
|
|
config SPL_USE_TINY_PRINTF
|
|
bool "Enable tiny printf() version in SPL"
|
|
depends on SPL
|
|
default y
|
|
help
|
|
This option enables a tiny, stripped down printf version.
|
|
This should only be used in space limited environments,
|
|
like SPL versions with hard memory limits. This version
|
|
reduces the code size by about 2.5KiB on armv7.
|
|
|
|
The supported format specifiers are %c, %s, %u/%d and %x.
|
|
|
|
config TPL_USE_TINY_PRINTF
|
|
bool "Enable tiny printf() version in TPL"
|
|
depends on TPL
|
|
default y if SPL_USE_TINY_PRINTF
|
|
help
|
|
This option enables a tiny, stripped down printf version.
|
|
This should only be used in space limited environments,
|
|
like SPL versions with hard memory limits. This version
|
|
reduces the code size by about 2.5KiB on armv7.
|
|
|
|
The supported format specifiers are %c, %s, %u/%d and %x.
|
|
|
|
config PANIC_HANG
|
|
bool "Do not reset the system on fatal error"
|
|
help
|
|
Define this option to stop the system in case of a fatal error,
|
|
so that you have to reset it manually. This is probably NOT a good
|
|
idea for an embedded system where you want the system to reboot
|
|
automatically as fast as possible, but it may be useful during
|
|
development since you can try to debug the conditions that lead to
|
|
the situation.
|
|
|
|
config REGEX
|
|
bool "Enable regular expression support"
|
|
default y if NET
|
|
help
|
|
If this variable is defined, U-Boot is linked against the
|
|
SLRE (Super Light Regular Expression) library, which adds
|
|
regex support to some commands, for example "env grep" and
|
|
"setexpr".
|
|
|
|
choice
|
|
prompt "Pseudo-random library support type"
|
|
depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
|
|
RNG_SANDBOX || UT_LIB && AES || FAT_WRITE
|
|
default LIB_RAND
|
|
help
|
|
Select the library to provide pseudo-random number generator
|
|
functions. LIB_HW_RAND supports certain hardware engines that
|
|
provide this functionality. If in doubt, select LIB_RAND.
|
|
|
|
config LIB_RAND
|
|
bool "Pseudo-random library support"
|
|
|
|
config LIB_HW_RAND
|
|
bool "HW Engine for random library support"
|
|
|
|
endchoice
|
|
|
|
config SPL_TINY_MEMSET
|
|
bool "Use a very small memset() in SPL"
|
|
help
|
|
The faster memset() is the arch-specific one (if available) enabled
|
|
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
|
|
better performance by writing a word at a time. But in very
|
|
size-constrained environments even this may be too big. Enable this
|
|
option to reduce code size slightly at the cost of some speed.
|
|
|
|
config TPL_TINY_MEMSET
|
|
bool "Use a very small memset() in TPL"
|
|
help
|
|
The faster memset() is the arch-specific one (if available) enabled
|
|
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
|
|
better performance by writing a word at a time. But in very
|
|
size-constrained environments even this may be too big. Enable this
|
|
option to reduce code size slightly at the cost of some speed.
|
|
|
|
config RBTREE
|
|
bool
|
|
|
|
config BITREVERSE
|
|
bool "Bit reverse library from Linux"
|
|
|
|
config TRACE
|
|
bool "Support for tracing of function calls and timing"
|
|
imply CMD_TRACE
|
|
select TIMER_EARLY
|
|
help
|
|
Enables function tracing within U-Boot. This allows recording of call
|
|
traces including timing information. The command can write data to
|
|
memory for exporting for analysis (e.g. using bootchart).
|
|
See doc/README.trace for full details.
|
|
|
|
config TRACE_BUFFER_SIZE
|
|
hex "Size of trace buffer in U-Boot"
|
|
depends on TRACE
|
|
default 0x01000000
|
|
help
|
|
Sets the size of the trace buffer in U-Boot. This is allocated from
|
|
memory during relocation. If this buffer is too small, the trace
|
|
history will be truncated, with later records omitted.
|
|
|
|
If early trace is enabled (i.e. before relocation), this buffer must
|
|
be large enough to include all the data from the early trace buffer as
|
|
well, since this is copied over to the main buffer during relocation.
|
|
|
|
A trace record is emitted for each function call and each record is
|
|
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
|
|
the size is too small then 'trace stats' will show a message saying
|
|
how many records were dropped due to buffer overflow.
|
|
|
|
config TRACE_CALL_DEPTH_LIMIT
|
|
int "Trace call depth limit"
|
|
depends on TRACE
|
|
default 15
|
|
help
|
|
Sets the maximum call depth up to which function calls are recorded.
|
|
|
|
config TRACE_EARLY
|
|
bool "Enable tracing before relocation"
|
|
depends on TRACE
|
|
help
|
|
Sometimes it is helpful to trace execution of U-Boot before
|
|
relocation. This is possible by using a arch-specific, fixed buffer
|
|
position in memory. Enable this option to start tracing as early as
|
|
possible after U-Boot starts.
|
|
|
|
config TRACE_EARLY_SIZE
|
|
hex "Size of early trace buffer in U-Boot"
|
|
depends on TRACE_EARLY
|
|
default 0x00100000
|
|
help
|
|
Sets the size of the early trace buffer in bytes. This is used to hold
|
|
tracing information before relocation.
|
|
|
|
config TRACE_EARLY_CALL_DEPTH_LIMIT
|
|
int "Early trace call depth limit"
|
|
depends on TRACE_EARLY
|
|
default 200
|
|
help
|
|
Sets the maximum call depth up to which function calls are recorded
|
|
during early tracing.
|
|
|
|
config TRACE_EARLY_ADDR
|
|
hex "Address of early trace buffer in U-Boot"
|
|
depends on TRACE_EARLY
|
|
default 0x00100000
|
|
help
|
|
Sets the address of the early trace buffer in U-Boot. This memory
|
|
must be accessible before relocation.
|
|
|
|
A trace record is emitted for each function call and each record is
|
|
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
|
|
the size is too small then the message which says the amount of early
|
|
data being coped will the the same as the
|
|
|
|
source lib/dhry/Kconfig
|
|
|
|
menu "Security support"
|
|
|
|
config AES
|
|
bool "Support the AES algorithm"
|
|
help
|
|
This provides a means to encrypt and decrypt data using the AES
|
|
(Advanced Encryption Standard). This algorithm uses a symetric key
|
|
and is widely used as a streaming cipher. Different key lengths are
|
|
supported by the algorithm but only a 128-bit key is supported at
|
|
present.
|
|
|
|
source lib/rsa/Kconfig
|
|
source lib/crypto/Kconfig
|
|
|
|
config TPM
|
|
bool "Trusted Platform Module (TPM) Support"
|
|
depends on DM
|
|
help
|
|
This enables support for TPMs which can be used to provide security
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
command to interactive the TPM. Driver model support is provided
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
a time by the TPM library.
|
|
|
|
config SPL_TPM
|
|
bool "Trusted Platform Module (TPM) Support in SPL"
|
|
depends on SPL_DM
|
|
help
|
|
This enables support for TPMs which can be used to provide security
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
command to interactive the TPM. Driver model support is provided
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
a time by the TPM library.
|
|
|
|
config TPL_TPM
|
|
bool "Trusted Platform Module (TPM) Support in TPL"
|
|
depends on TPL_DM
|
|
help
|
|
This enables support for TPMs which can be used to provide security
|
|
features for your board. The TPM can be connected via LPC or I2C
|
|
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
|
|
command to interactive the TPM. Driver model support is provided
|
|
for the low-level TPM interface, but only one TPM is supported at
|
|
a time by the TPM library.
|
|
|
|
endmenu
|
|
|
|
menu "Android Verified Boot"
|
|
|
|
config LIBAVB
|
|
bool "Android Verified Boot 2.0 support"
|
|
depends on ANDROID_BOOT_IMAGE
|
|
default n
|
|
help
|
|
This enables support of Android Verified Boot 2.0 which can be used
|
|
to assure the end user of the integrity of the software running on a
|
|
device. Introduces such features as boot chain of trust, rollback
|
|
protection etc.
|
|
|
|
endmenu
|
|
|
|
menu "Hashing Support"
|
|
|
|
config SHA1
|
|
bool "Enable SHA1 support"
|
|
help
|
|
This option enables support of hashing using SHA1 algorithm.
|
|
The hash is calculated in software.
|
|
The SHA1 algorithm produces a 160-bit (20-byte) hash value
|
|
(digest).
|
|
|
|
config SHA256
|
|
bool "Enable SHA256 support"
|
|
help
|
|
This option enables support of hashing using SHA256 algorithm.
|
|
The hash is calculated in software.
|
|
The SHA256 algorithm produces a 256-bit (32-byte) hash value
|
|
(digest).
|
|
|
|
config SHA512_ALGO
|
|
bool "Enable SHA512 algorithm"
|
|
help
|
|
This option enables support of internal SHA512 algorithm.
|
|
|
|
config SHA512
|
|
bool "Enable SHA512 support"
|
|
depends on SHA512_ALGO
|
|
help
|
|
This option enables support of hashing using SHA512 algorithm.
|
|
The hash is calculated in software.
|
|
The SHA512 algorithm produces a 512-bit (64-byte) hash value
|
|
(digest).
|
|
|
|
config SHA384
|
|
bool "Enable SHA384 support"
|
|
depends on SHA512_ALGO
|
|
help
|
|
This option enables support of hashing using SHA384 algorithm.
|
|
The hash is calculated in software.
|
|
The SHA384 algorithm produces a 384-bit (48-byte) hash value
|
|
(digest).
|
|
|
|
config SHA_HW_ACCEL
|
|
bool "Enable hardware acceleration for SHA hash functions"
|
|
help
|
|
This option enables hardware acceleration for the SHA1 and SHA256
|
|
hashing algorithms. This affects the 'hash' command and also the
|
|
hash_lookup_algo() function.
|
|
|
|
if SHA_HW_ACCEL
|
|
|
|
config SHA512_HW_ACCEL
|
|
bool "Enable hardware acceleration for SHA512"
|
|
depends on SHA512_ALGO
|
|
help
|
|
This option enables hardware acceleration for the SHA384 and SHA512
|
|
hashing algorithms. This affects the 'hash' command and also the
|
|
hash_lookup_algo() function.
|
|
|
|
config SHA_PROG_HW_ACCEL
|
|
bool "Enable Progressive hashing support using hardware"
|
|
help
|
|
This option enables hardware-acceleration for SHA progressive
|
|
hashing.
|
|
Data can be streamed in a block at a time and the hashing is
|
|
performed in hardware.
|
|
|
|
endif
|
|
|
|
config MD5
|
|
bool "Support MD5 algorithm"
|
|
help
|
|
This option enables MD5 support. MD5 is an algorithm designed
|
|
in 1991 that produces a 16-byte digest (or checksum) from its input
|
|
data. It has a number of vulnerabilities which preclude its use in
|
|
security applications, but it can be useful for providing a quick
|
|
checksum of a block of data.
|
|
|
|
config SPL_MD5
|
|
bool "Support MD5 algorithm in SPL"
|
|
help
|
|
This option enables MD5 support in SPL. MD5 is an algorithm designed
|
|
in 1991 that produces a 16-byte digest (or checksum) from its input
|
|
data. It has a number of vulnerabilities which preclude its use in
|
|
security applications, but it can be useful for providing a quick
|
|
checksum of a block of data.
|
|
|
|
config CRC32C
|
|
bool
|
|
|
|
config XXHASH
|
|
bool
|
|
|
|
endmenu
|
|
|
|
menu "Compression Support"
|
|
|
|
config LZ4
|
|
bool "Enable LZ4 decompression support"
|
|
help
|
|
If this option is set, support for LZ4 compressed images
|
|
is included. The LZ4 algorithm can run in-place as long as the
|
|
compressed image is loaded to the end of the output buffer, and
|
|
trades lower compression ratios for much faster decompression.
|
|
|
|
NOTE: This implements the release version of the LZ4 frame
|
|
format as generated by default by the 'lz4' command line tool.
|
|
This is not the same as the outdated, less efficient legacy
|
|
frame format currently (2015) implemented in the Linux kernel
|
|
(generated by 'lz4 -l'). The two formats are incompatible.
|
|
|
|
config LZMA
|
|
bool "Enable LZMA decompression support"
|
|
help
|
|
This enables support for LZMA (Lempel-Ziv-Markov chain algorithm),
|
|
a dictionary compression algorithm that provides a high compression
|
|
ratio and fairly fast decompression speed. See also
|
|
CONFIG_CMD_LZMADEC which provides a decode command.
|
|
|
|
config LZO
|
|
bool "Enable LZO decompression support"
|
|
help
|
|
This enables support for LZO compression algorithm.r
|
|
|
|
config GZIP
|
|
bool "Enable gzip decompression support"
|
|
select ZLIB
|
|
default y
|
|
help
|
|
This enables support for GZIP compression algorithm.
|
|
|
|
config ZLIB_UNCOMPRESS
|
|
bool "Enables zlib's uncompress() functionality"
|
|
help
|
|
This enables an extra zlib functionality: the uncompress() function,
|
|
which decompresses data from a buffer into another, knowing their
|
|
sizes. Unlike gunzip(), there is no header parsing.
|
|
|
|
config GZIP_COMPRESSED
|
|
bool
|
|
select ZLIB
|
|
|
|
config BZIP2
|
|
bool "Enable bzip2 decompression support"
|
|
help
|
|
This enables support for BZIP2 compression algorithm.
|
|
|
|
config ZLIB
|
|
bool
|
|
default y
|
|
help
|
|
This enables ZLIB compression lib.
|
|
|
|
config ZSTD
|
|
bool "Enable Zstandard decompression support"
|
|
select XXHASH
|
|
help
|
|
This enables Zstandard decompression library.
|
|
|
|
config SPL_LZ4
|
|
bool "Enable LZ4 decompression support in SPL"
|
|
help
|
|
This enables support for the LZ4 decompression algorithm in SPL. LZ4
|
|
is a lossless data compression algorithm that is focused on
|
|
fast compression and decompression speed. It belongs to the LZ77
|
|
family of byte-oriented compression schemes.
|
|
|
|
config SPL_LZMA
|
|
bool "Enable LZMA decompression support for SPL build"
|
|
help
|
|
This enables support for LZMA compression algorithm for SPL boot.
|
|
|
|
config SPL_LZO
|
|
bool "Enable LZO decompression support in SPL"
|
|
help
|
|
This enables support for LZO compression algorithm in the SPL.
|
|
|
|
config SPL_GZIP
|
|
bool "Enable gzip decompression support for SPL build"
|
|
select SPL_ZLIB
|
|
help
|
|
This enables support for GZIP compression altorithm for SPL boot.
|
|
|
|
config SPL_ZLIB
|
|
bool
|
|
help
|
|
This enables compression lib for SPL boot.
|
|
|
|
config SPL_ZSTD
|
|
bool "Enable Zstandard decompression support in SPL"
|
|
select XXHASH
|
|
help
|
|
This enables Zstandard decompression library in the SPL.
|
|
|
|
endmenu
|
|
|
|
config ERRNO_STR
|
|
bool "Enable function for getting errno-related string message"
|
|
help
|
|
The function errno_str(int errno), returns a pointer to the errno
|
|
corresponding text message:
|
|
- if errno is null or positive number - a pointer to "Success" message
|
|
- if errno is negative - a pointer to errno related message
|
|
|
|
config HEXDUMP
|
|
bool "Enable hexdump"
|
|
help
|
|
This enables functions for printing dumps of binary data.
|
|
|
|
config SPL_HEXDUMP
|
|
bool "Enable hexdump in SPL"
|
|
depends on HEXDUMP
|
|
default y
|
|
help
|
|
This enables functions for printing dumps of binary data in
|
|
SPL.
|
|
|
|
config GETOPT
|
|
bool "Enable getopt"
|
|
help
|
|
This enables functions for parsing command-line options.
|
|
|
|
config OF_LIBFDT
|
|
bool "Enable the FDT library"
|
|
default y if OF_CONTROL
|
|
help
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
accessing binary device tree images in memory, such as adding and
|
|
removing nodes and properties, scanning through the tree and finding
|
|
particular compatible nodes. The library operates on a flattened
|
|
version of the device tree.
|
|
|
|
config OF_LIBFDT_ASSUME_MASK
|
|
hex "Mask of conditions to assume for libfdt"
|
|
depends on OF_LIBFDT || FIT
|
|
default 0
|
|
help
|
|
Use this to change the assumptions made by libfdt about the
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
config OF_LIBFDT_OVERLAY
|
|
bool "Enable the FDT library overlay support"
|
|
depends on OF_LIBFDT
|
|
default y if ARCH_OMAP2PLUS || ARCH_KEYSTONE
|
|
help
|
|
This enables the FDT library (libfdt) overlay support.
|
|
|
|
config SPL_OF_LIBFDT
|
|
bool "Enable the FDT library for SPL"
|
|
default y if SPL_OF_CONTROL
|
|
help
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
accessing binary device tree images in memory, such as adding and
|
|
removing nodes and properties, scanning through the tree and finding
|
|
particular compatible nodes. The library operates on a flattened
|
|
version of the device tree.
|
|
|
|
config SPL_OF_LIBFDT_ASSUME_MASK
|
|
hex "Mask of conditions to assume for libfdt"
|
|
depends on SPL_OF_LIBFDT || FIT
|
|
default 0xff
|
|
help
|
|
Use this to change the assumptions made by libfdt in SPL about the
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
config TPL_OF_LIBFDT
|
|
bool "Enable the FDT library for TPL"
|
|
default y if TPL_OF_CONTROL
|
|
help
|
|
This enables the FDT library (libfdt). It provides functions for
|
|
accessing binary device tree images in memory, such as adding and
|
|
removing nodes and properties, scanning through the tree and finding
|
|
particular compatible nodes. The library operates on a flattened
|
|
version of the device tree.
|
|
|
|
config TPL_OF_LIBFDT_ASSUME_MASK
|
|
hex "Mask of conditions to assume for libfdt"
|
|
depends on TPL_OF_LIBFDT || FIT
|
|
default 0xff
|
|
help
|
|
Use this to change the assumptions made by libfdt in TPL about the
|
|
device tree it is working with. A value of 0 means that no assumptions
|
|
are made, and libfdt is able to deal with malicious data. A value of
|
|
0xff means all assumptions are made and any invalid data may cause
|
|
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
|
|
|
|
config FDT_FIXUP_PARTITIONS
|
|
bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
|
|
depends on OF_LIBFDT
|
|
depends on CMD_MTDPARTS
|
|
help
|
|
Allow overwriting defined partitions in the device tree blob
|
|
using partition info defined in the 'mtdparts' environment
|
|
variable.
|
|
|
|
menu "System tables"
|
|
depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER)
|
|
|
|
config BLOBLIST_TABLES
|
|
bool "Put tables in a bloblist"
|
|
depends on X86 && BLOBLIST
|
|
help
|
|
Normally tables are placed at address 0xf0000 and can be up to 64KB
|
|
long. With this option, tables are instead placed in the bloblist
|
|
with a pointer from 0xf0000. The size can then be larger and the
|
|
tables can be placed high in memory.
|
|
|
|
config GENERATE_SMBIOS_TABLE
|
|
bool "Generate an SMBIOS (System Management BIOS) table"
|
|
default y
|
|
depends on X86 || EFI_LOADER
|
|
help
|
|
The System Management BIOS (SMBIOS) specification addresses how
|
|
motherboard and system vendors present management information about
|
|
their products in a standard format by extending the BIOS interface
|
|
on Intel architecture systems.
|
|
|
|
Check http://www.dmtf.org/standards/smbios for details.
|
|
|
|
See also SMBIOS_SYSINFO which allows SMBIOS values to be provided in
|
|
the devicetree.
|
|
|
|
endmenu
|
|
|
|
config ASN1_COMPILER
|
|
bool
|
|
|
|
config ASN1_DECODER
|
|
bool
|
|
help
|
|
Enable asn1 decoder library.
|
|
|
|
config OID_REGISTRY
|
|
bool
|
|
help
|
|
Enable fast lookup object identifier registry.
|
|
|
|
config SMBIOS_PARSER
|
|
bool "SMBIOS parser"
|
|
help
|
|
A simple parser for SMBIOS data.
|
|
|
|
source lib/efi/Kconfig
|
|
source lib/efi_loader/Kconfig
|
|
source lib/optee/Kconfig
|
|
|
|
config TEST_FDTDEC
|
|
bool "enable fdtdec test"
|
|
depends on OF_LIBFDT
|
|
|
|
config LIB_DATE
|
|
bool
|
|
|
|
config LIB_ELF
|
|
bool
|
|
help
|
|
Support basic elf loading/validating functions.
|
|
This supports for 32 bit and 64 bit versions.
|
|
|
|
config LMB
|
|
bool "Enable the logical memory blocks library (lmb)"
|
|
default y if ARC || ARM || M68K || MICROBLAZE || MIPS || NDS32 || \
|
|
NIOS2 || PPC || RISCV || SANDBOX || SH || X86 || XTENSA
|
|
help
|
|
Support the library logical memory blocks.
|
|
|
|
config LMB_USE_MAX_REGIONS
|
|
bool "Use a commun number of memory and reserved regions in lmb lib"
|
|
depends on LMB
|
|
default y
|
|
help
|
|
Define the number of supported memory regions in the library logical
|
|
memory blocks.
|
|
This feature allow to reduce the lmb library size by using compiler
|
|
optimization when LMB_MEMORY_REGIONS == LMB_RESERVED_REGIONS.
|
|
|
|
config LMB_MAX_REGIONS
|
|
int "Number of memory and reserved regions in lmb lib"
|
|
depends on LMB && LMB_USE_MAX_REGIONS
|
|
default 8
|
|
help
|
|
Define the number of supported regions, memory and reserved, in the
|
|
library logical memory blocks.
|
|
|
|
config LMB_MEMORY_REGIONS
|
|
int "Number of memory regions in lmb lib"
|
|
depends on LMB && !LMB_USE_MAX_REGIONS
|
|
default 8
|
|
help
|
|
Define the number of supported memory regions in the library logical
|
|
memory blocks.
|
|
The minimal value is CONFIG_NR_DRAM_BANKS.
|
|
|
|
config LMB_RESERVED_REGIONS
|
|
int "Number of reserved regions in lmb lib"
|
|
depends on LMB && !LMB_USE_MAX_REGIONS
|
|
default 8
|
|
help
|
|
Define the number of supported reserved regions in the library logical
|
|
memory blocks.
|
|
|
|
endmenu
|
|
|
|
config PHANDLE_CHECK_SEQ
|
|
bool "Enable phandle check while getting sequence number"
|
|
default n
|
|
help
|
|
When there are multiple device tree nodes with same name,
|
|
enable this config option to distinguish them using
|
|
phandles in fdtdec_get_alias_seq() function.
|