u-boot/drivers/usb/usb_ehci_fsl.h
Michael Trimarchi 6b92487dcf USB ehci freescale support
Add USB ehci freescale support

Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
2009-01-28 19:57:27 +01:00

86 lines
2.8 KiB
C

/*
* Copyright (c) 2005 freescale semiconductor
* Copyright (c) 2005 MontaVista Software
* Copyright (c) 2008 Excito Elektronik i Sk=E5ne AB
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _EHCI_FSL_H
#define _EHCI_FSL_H
/* Global offsets */
#define FSL_SKIP_PCI 0x100
/* offsets for the non-ehci registers in the FSL SOC USB controller */
#define FSL_SOC_USB_ULPIVP 0x170
#define FSL_SOC_USB_PORTSC1 0x184
#define PORT_PTS_MSK (3 << 30)
#define PORT_PTS_UTMI (0 << 30)
#define PORT_PTS_ULPI (2 << 30)
#define PORT_PTS_SERIAL (3 << 30)
#define PORT_PTS_PTW (1 << 28)
/* USBMODE Register bits */
#define CM_IDLE (0 << 0)
#define CM_RESERVED (1 << 0)
#define CM_DEVICE (2 << 0)
#define CM_HOST (3 << 0)
#define USBMODE_RESERVED_2 (0 << 2)
#define SLOM (1 << 3)
#define SDIS (1 << 4)
/* CONTROL Register bits */
#define ULPI_INT_EN (1 << 0)
#define WU_INT_EN (1 << 1)
#define USB_EN (1 << 2)
#define LSF_EN (1 << 3)
#define KEEP_OTG_ON (1 << 4)
#define OTG_PORT (1 << 5)
#define REFSEL_12MHZ (0 << 6)
#define REFSEL_16MHZ (1 << 6)
#define REFSEL_48MHZ (2 << 6)
#define PLL_RESET (1 << 8)
#define UTMI_PHY_EN (1 << 9)
#define PHY_CLK_SEL_UTMI (0 << 10)
#define PHY_CLK_SEL_ULPI (1 << 10)
#define CLKIN_SEL_USB_CLK (0 << 11)
#define CLKIN_SEL_USB_CLK2 (1 << 11)
#define CLKIN_SEL_SYS_CLK (2 << 11)
#define CLKIN_SEL_SYS_CLK2 (3 << 11)
#define RESERVED_18 (0 << 13)
#define RESERVED_17 (0 << 14)
#define RESERVED_16 (0 << 15)
#define WU_INT (1 << 16)
#define PHY_CLK_VALID (1 << 17)
#define FSL_SOC_USB_PORTSC2 0x188
#define FSL_SOC_USB_USBMODE 0x1a8
#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */
#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */
#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */
#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
#define SNOOP_SIZE_2GB 0x1e
/* System Clock Control Register */
#define MPC83XX_SCCR_USB_MASK 0x00f00000
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
#endif /* _EHCI_FSL_H */