mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
a1d2fd3874
The Ten64 is a networking-oriented MiniITX board using the NXP LS1088A SoC. This patch provides the bare minimum to support Ten64 boards under U-Boot for distroboot. Some related drivers have not yet been submitted and this basic support lacks some of the opinionated defaults provided by our firmware distribution. Signed-off-by: Mathew McBride <matt@traverse.com.au> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
377 lines
6.4 KiB
Text
377 lines
6.4 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree file for Travese Ten64 (LS1088) board
|
|
* Based on fsl-ls1088a-rdb.dts
|
|
* Copyright 2017-2020 NXP
|
|
* Copyright 2019-2021 Traverse Technologies
|
|
*
|
|
* Author: Mathew McBride <matt@traverse.com.au>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "fsl-ls1088a.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Traverse Ten64";
|
|
compatible = "traverse,ten64", "fsl,ls1088a";
|
|
|
|
aliases {
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
buttons {
|
|
compatible = "gpio-keys";
|
|
|
|
/* Fired by system controller when
|
|
* external power off (e.g ATX Power Button)
|
|
* asserted
|
|
*/
|
|
powerdn {
|
|
label = "External Power Down";
|
|
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
|
interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
|
|
linux,code = <KEY_POWER>;
|
|
};
|
|
|
|
/* Rear Panel 'ADMIN' button (GPIO_H) */
|
|
admin {
|
|
label = "ADMIN button";
|
|
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
|
|
interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
sfp1down {
|
|
label = "ten64:green:sfp1:down";
|
|
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sfp2up {
|
|
label = "ten64:green:sfp2:up";
|
|
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
admin {
|
|
label = "ten64:admin";
|
|
gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
sfp_xg0: dpmac2-sfp {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&sfplower_i2c>;
|
|
tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
|
|
los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
|
|
maximum-power-milliwatt = <2000>;
|
|
};
|
|
|
|
sfp_xg1: dpmac1-sfp {
|
|
compatible = "sff,sfp";
|
|
i2c-bus = <&sfpupper_i2c>;
|
|
tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
|
|
tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
|
|
mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
|
|
los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
|
|
maximum-power-milliwatt = <2000>;
|
|
};
|
|
};
|
|
|
|
/* XG1 - Upper SFP */
|
|
&dpmac1 {
|
|
sfp = <&sfp_xg1>;
|
|
phy-connection-type = "10gbase-r";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
/* XG0 - Lower SFP */
|
|
&dpmac2 {
|
|
sfp = <&sfp_xg0>;
|
|
phy-connection-type = "10gbase-r";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
/* DPMAC3..6 is GE4 to GE8 */
|
|
&dpmac3 {
|
|
phy-handle = <&mdio1_phy5>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac4 {
|
|
phy-handle = <&mdio1_phy6>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac5 {
|
|
phy-handle = <&mdio1_phy7>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac6 {
|
|
phy-handle = <&mdio1_phy8>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
/* DPMAC7..10 is GE0 to GE3 */
|
|
&dpmac7 {
|
|
phy-handle = <&mdio1_phy1>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac8 {
|
|
phy-handle = <&mdio1_phy2>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac9 {
|
|
phy-handle = <&mdio1_phy3>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&dpmac10 {
|
|
phy-handle = <&mdio1_phy4>;
|
|
phy-connection-type = "qsgmii";
|
|
managed = "in-band-status";
|
|
status = "okay";
|
|
};
|
|
|
|
&serial0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emdio1 {
|
|
status = "okay";
|
|
|
|
mdio1_phy5: ethernet-phy@c {
|
|
reg = <0xc>;
|
|
};
|
|
|
|
mdio1_phy6: ethernet-phy@d {
|
|
reg = <0xd>;
|
|
};
|
|
|
|
mdio1_phy7: ethernet-phy@e {
|
|
reg = <0xe>;
|
|
};
|
|
|
|
mdio1_phy8: ethernet-phy@f {
|
|
reg = <0xf>;
|
|
};
|
|
|
|
mdio1_phy1: ethernet-phy@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
|
|
mdio1_phy2: ethernet-phy@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
|
|
mdio1_phy3: ethernet-phy@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
|
|
mdio1_phy4: ethernet-phy@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
&esdhc {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
sfpgpio: gpio@76 {
|
|
compatible = "ti,tca9539";
|
|
reg = <0x76>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
admin_led_lower {
|
|
gpio-hog;
|
|
gpios = <13 GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
at97sc: tpm@29 {
|
|
compatible = "atmel,at97sc3204t";
|
|
reg = <0x29>;
|
|
};
|
|
|
|
uc: board-controller@7e {
|
|
compatible = "traverse,ten64-controller";
|
|
reg = <0x7e>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
rx8035: rtc@32 {
|
|
compatible = "epson,rx8035";
|
|
reg = <0x32>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
i2c-switch@70 {
|
|
compatible = "nxp,pca9540";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x70>;
|
|
|
|
sfpupper_i2c: i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
sfplower_i2c: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
|
|
en25s64: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "bl2";
|
|
reg = <0 0x100000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "bl3";
|
|
reg = <0x100000 0x200000>;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "mcfirmware";
|
|
reg = <0x300000 0x200000>;
|
|
};
|
|
|
|
partition@500000 {
|
|
label = "ubootenv";
|
|
reg = <0x500000 0x80000>;
|
|
};
|
|
|
|
partition@580000 {
|
|
label = "dpl";
|
|
reg = <0x580000 0x40000>;
|
|
};
|
|
|
|
partition@5C0000 {
|
|
label = "dpc";
|
|
reg = <0x5C0000 0x40000>;
|
|
};
|
|
|
|
partition@600000 {
|
|
label = "devicetree";
|
|
reg = <0x600000 0x40000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
nand: flash@1 {
|
|
compatible = "spi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <1>;
|
|
spi-max-frequency = <20000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* reserved for future boot direct from NAND flash
|
|
* (this would use the same layout as the 8MiB NOR flash)
|
|
*/
|
|
partition@0 {
|
|
label = "nand-boot-reserved";
|
|
reg = <0 0x800000>;
|
|
};
|
|
|
|
/* recovery / install environment */
|
|
partition@800000 {
|
|
label = "recovery";
|
|
reg = <0x800000 0x2000000>;
|
|
};
|
|
|
|
/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
|
|
partition@2800000 {
|
|
label = "ubia";
|
|
reg = <0x2800000 0x6C00000>;
|
|
};
|
|
|
|
/* ubib (second OpenWrt) */
|
|
partition@9400000 {
|
|
label = "ubib";
|
|
reg = <0x9400000 0x6C00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
};
|