u-boot/arch/arm/mach-k3
Sinthu Raja 1e82a80d17 arm: j721e: Add support for selecting DT based on board name
Enable support for selecting DTB from FIT within SPL based on the
board name read from EEPROM. This will help to use single defconfig
for both EVM and SK.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16 14:19:30 -05:00
..
include/mach arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
j721e clk: ti: k3: Update driver to account for divider flags 2021-09-17 14:47:03 -04:00
j721s2 arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
j7200 clk: ti: k3: Update driver to account for divider flags 2021-09-17 14:47:03 -04:00
am6_init.c arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge 2021-09-17 14:47:03 -04:00
am642_init.c mach-k3: am642_init: Probe AM65 CPSW NUSS for R5/A53 SPL 2022-01-15 10:38:26 -05:00
arm64-mmu.c arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
cache.S arm: mach-k3: Clean non-coherent lines out of L3 cache 2020-08-11 10:18:27 +05:30
common.c drivers: misc: Makefile: Enable fs_loader compilation at SPL Level 2022-02-08 11:00:02 -05:00
common.h arm: mach-k3: Cleanup common start_non_linux_remote_cores() 2021-07-27 11:00:44 +05:30
config.mk tools: k3_fit_atf: add DM binary to the FIT image 2021-06-11 16:34:52 +05:30
config_secure.mk arm: mach-k3: Add secure device build support 2019-04-26 17:51:51 -04:00
j721e_init.c arm: j721e: Add support for selecting DT based on board name 2022-02-16 14:19:30 -05:00
j721s2_init.c arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
Kconfig arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
lowlevel_init.S armv7r: K3: Allow SPL to run only on core 0 2018-11-26 22:52:11 -05:00
Makefile arm: K3: Add basic support for J721S2 SoC definition 2022-02-08 09:41:26 -05:00
r5_mpu.c armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM 2020-03-03 13:08:14 +05:30
security.c arm: mach-k3: add support for detecting firmware images from FIT 2021-06-11 16:34:52 +05:30
sysfw-loader.c ARM: mach-k3: sysfw-loader: Copy sysfw.itb to OCRAM in OSPI/SPI bootmode 2022-01-15 10:38:26 -05:00