mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
174 lines
3.4 KiB
C
174 lines
3.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
* Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
|
|
*/
|
|
|
|
#ifndef __MC34VR500_H_
|
|
#define __MC34VR500_H_
|
|
|
|
#include <power/pmic.h>
|
|
|
|
#define MC34VR500_I2C_ADDR 0x08
|
|
|
|
/* Drivers name */
|
|
#define MC34VR500_REGULATOR_DRIVER "mc34vr500_regulator"
|
|
|
|
/* Register map */
|
|
enum {
|
|
MC34VR500_DEVICEID = 0x00,
|
|
|
|
MC34VR500_SILICONREVID = 0x03,
|
|
MC34VR500_FABID,
|
|
MC34VR500_INTSTAT0,
|
|
MC34VR500_INTMASK0,
|
|
MC34VR500_INTSENSE0,
|
|
MC34VR500_INTSTAT1,
|
|
MC34VR500_INTMASK1,
|
|
MC34VR500_INTSENSE1,
|
|
|
|
MC34VR500_INTSTAT4 = 0x11,
|
|
MC34VR500_INTMASK4,
|
|
MC34VR500_INTSENSE4,
|
|
|
|
MC34VR500_PWRCTL = 0x1B,
|
|
|
|
MC34VR500_SW1VOLT = 0x2E,
|
|
MC34VR500_SW1STBY,
|
|
MC34VR500_SW1OFF,
|
|
MC34VR500_SW1MODE,
|
|
MC34VR500_SW1CONF,
|
|
MC34VR500_SW2VOLT,
|
|
MC34VR500_SW2STBY,
|
|
MC34VR500_SW2OFF,
|
|
MC34VR500_SW2MODE,
|
|
MC34VR500_SW2CONF,
|
|
|
|
MC34VR500_SW3VOLT = 0x3C,
|
|
MC34VR500_SW3STBY,
|
|
MC34VR500_SW3OFF,
|
|
MC34VR500_SW3MODE,
|
|
MC34VR500_SW3CONF,
|
|
|
|
MC34VR500_SW4VOLT = 0x4A,
|
|
MC34VR500_SW4STBY,
|
|
MC34VR500_SW4OFF,
|
|
MC34VR500_SW4MODE,
|
|
MC34VR500_SW4CONF,
|
|
|
|
MC34VR500_REFOUTCRTRL = 0x6A,
|
|
|
|
MC34VR500_LDO1CTL = 0x6D,
|
|
MC34VR500_LDO2CTL,
|
|
MC34VR500_LDO3CTL,
|
|
MC34VR500_LDO4CTL,
|
|
MC34VR500_LDO5CTL,
|
|
|
|
MC34VR500_PAGE_REGISTER = 0x7F,
|
|
|
|
/* Internal RAM */
|
|
MC34VR500_SW1_VOLT = 0xA8,
|
|
MC34VR500_SW1_SEQ,
|
|
MC34VR500_SW1_CONFIG,
|
|
|
|
MC34VR500_SW2_VOLT = 0xAC,
|
|
MC34VR500_SW2_SEQ,
|
|
MC34VR500_SW2_CONFIG,
|
|
|
|
MC34VR500_SW3_VOLT = 0xB0,
|
|
MC34VR500_SW3_SEQ,
|
|
MC34VR500_SW3_CONFIG,
|
|
|
|
MC34VR500_SW4_VOLT = 0xB8,
|
|
MC34VR500_SW4_SEQ,
|
|
MC34VR500_SW4_CONFIG,
|
|
|
|
MC34VR500_REFOUT_SEQ = 0xC4,
|
|
|
|
MC34VR500_LDO1_VOLT = 0xCC,
|
|
MC34VR500_LDO1_SEQ,
|
|
|
|
MC34VR500_LDO2_VOLT = 0xD0,
|
|
MC34VR500_LDO2_SEQ,
|
|
|
|
MC34VR500_LDO3_VOLT = 0xD4,
|
|
MC34VR500_LDO3_SEQ,
|
|
|
|
MC34VR500_LDO4_VOLT = 0xD8,
|
|
MC34VR500_LDO4_SEQ,
|
|
|
|
MC34VR500_LDO5_VOLT = 0xDC,
|
|
MC34VR500_LDO5_SEQ,
|
|
|
|
MC34VR500_PU_CONFIG1 = 0xE0,
|
|
|
|
MC34VR500_TBB_POR = 0xE4,
|
|
|
|
MC34VR500_PWRGD_EN = 0xE8,
|
|
|
|
MC34VR500_NUM_OF_REGS,
|
|
};
|
|
|
|
/* Registor offset based on SWxVOLT register */
|
|
#define MC34VR500_VOLT_OFFSET 0
|
|
#define MC34VR500_STBY_OFFSET 1
|
|
#define MC34VR500_OFF_OFFSET 2
|
|
#define MC34VR500_MODE_OFFSET 3
|
|
#define MC34VR500_CONF_OFFSET 4
|
|
|
|
#define SW_MODE_MASK 0xf
|
|
#define SW_MODE_SHIFT 0
|
|
|
|
#define LDO_VOL_MASK 0xf
|
|
#define LDO_EN (1 << 4)
|
|
#define LDO_MODE_SHIFT 4
|
|
#define LDO_MODE_MASK (1 << 4)
|
|
#define LDO_MODE_OFF 0
|
|
#define LDO_MODE_ON 1
|
|
|
|
#define REFOUTEN (1 << 4)
|
|
|
|
/*
|
|
* Regulator Mode Control
|
|
*
|
|
* OFF: The regulator is switched off and the output voltage is discharged.
|
|
* PFM: In this mode, the regulator is always in PFM mode, which is useful
|
|
* at light loads for optimized efficiency.
|
|
* PWM: In this mode, the regulator is always in PWM mode operation
|
|
* regardless of load conditions.
|
|
* APS: In this mode, the regulator moves automatically between pulse
|
|
* skipping mode and PWM mode depending on load conditions.
|
|
*
|
|
* SWxMODE[3:0]
|
|
* Normal Mode | Standby Mode | value
|
|
* OFF OFF 0x0
|
|
* PWM OFF 0x1
|
|
* PFM OFF 0x3
|
|
* APS OFF 0x4
|
|
* PWM PWM 0x5
|
|
* PWM APS 0x6
|
|
* APS APS 0x8
|
|
* APS PFM 0xc
|
|
* PWM PFM 0xd
|
|
*/
|
|
#define OFF_OFF 0x0
|
|
#define PWM_OFF 0x1
|
|
#define PFM_OFF 0x3
|
|
#define APS_OFF 0x4
|
|
#define PWM_PWM 0x5
|
|
#define PWM_APS 0x6
|
|
#define APS_APS 0x8
|
|
#define APS_PFM 0xc
|
|
#define PWM_PFM 0xd
|
|
|
|
enum swx {
|
|
SW1 = 0,
|
|
SW2,
|
|
SW3,
|
|
SW4,
|
|
};
|
|
|
|
int mc34vr500_get_sw_volt(uint8_t sw);
|
|
int mc34vr500_set_sw_volt(uint8_t sw, int sw_volt);
|
|
int power_mc34vr500_init(unsigned char bus);
|
|
#endif /* __MC34VR500_PMIC_H_ */
|