u-boot/arch/arm/include/asm/arch-lpc32xx/config.h
Vladimir Zapolskiy 0ce3f1f90a ARM: lpc3250: config: add generic board support
The only LPC3250 board works fine with enabled generic board support,
add CONFIG_SYS_GENERIC_BOARD right into the arch config header.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2015-02-16 15:48:36 -05:00

61 lines
1.6 KiB
C

/*
* Common definitions for LPC32XX board configurations
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _LPC32XX_CONFIG_H
#define _LPC32XX_CONFIG_H
#define CONFIG_SYS_GENERIC_BOARD
/* Basic CPU architecture */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
/* UART configuration */
#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
(CONFIG_SYS_LPC32XX_UART == 7)
#define CONFIG_LPC32XX_HSUART
#else
#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
#endif
#if defined(CONFIG_SYS_NS16550_SERIAL)
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SYS_NS16550_COM1 UART3_BASE
#define CONFIG_SYS_NS16550_COM2 UART4_BASE
#define CONFIG_SYS_NS16550_COM3 UART5_BASE
#define CONFIG_SYS_NS16550_COM4 UART6_BASE
#endif
#if defined(CONFIG_LPC32XX_HSUART)
#if CONFIG_SYS_LPC32XX_UART == 1
#define HS_UART_BASE HS_UART1_BASE
#elif CONFIG_SYS_LPC32XX_UART == 2
#define HS_UART_BASE HS_UART2_BASE
#else /* CONFIG_SYS_LPC32XX_UART == 7 */
#define HS_UART_BASE HS_UART7_BASE
#endif
#endif
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
/* NOR Flash */
#if defined(CONFIG_SYS_FLASH_CFI)
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_PROTECTION
#endif
#endif /* _LPC32XX_CONFIG_H */