mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
86cf1c8285
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
124 lines
3.3 KiB
C
124 lines
3.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2010
|
|
* Ilko Iliev <iliev@ronetix.at>
|
|
* Asen Dimov <dimov@ronetix.at>
|
|
* Ronetix GmbH <www.ronetix.at>
|
|
*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* Configuation settings for the PM9G45 board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_AT91_GPIO 1
|
|
#define CONFIG_ATMEL_USART 1
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
|
|
#define CONFIG_SYS_USE_NANDFLASH 1
|
|
|
|
/* LED */
|
|
#define CONFIG_AT91_LED
|
|
#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */
|
|
#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
|
|
#define CONFIG_JFFS2_CMDLINE 1
|
|
#define CONFIG_JFFS2_NAND 1
|
|
#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
|
|
#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
|
|
#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
|
|
|
|
/* SDRAM */
|
|
#define PHYS_SDRAM 0x70000000
|
|
#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
/* our ALE is AD21 */
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3)
|
|
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_MACB 1
|
|
#define CONFIG_RMII 1
|
|
#define CONFIG_NET_RETRY_COUNT 20
|
|
#define CONFIG_RESET_PHY_R 1
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
/* board specific(not enough SRAM) */
|
|
#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_OFFSET 0x60000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x80000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
|
#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
|
|
0x1000)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
|
|
#endif
|