u-boot/arch/arm/dts/rk3288-evb.dtsi
Tom Rini 4549e789c1 SPDX: Convert all of our multiple license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have multiple licenses (in
these cases, dual license) declared in the SPDX-License-Identifier tag.
In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A
or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B"
as per the Linux Kernel style document.  Note that parenthesis are
allowed so when they were used before we continue to use them.

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 10:24:31 -04:00

480 lines
9.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
#include "rk3288.dtsi"
/ {
memory {
reg = <0 0x80000000>;
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
keys: gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@0 {
gpio-key,wakeup = <1>;
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <116>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
};
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vcc_flash: flash-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
vcc_5v: usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
};
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55
56 57 58 59 60 61 62 63
64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90 91 92 93 94 95
96 97 98 99 100 101 102 103
104 105 106 107 108 109 110 111
112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127
128 129 130 131 132 133 134 135
136 137 138 139 140 141 142 143
144 145 146 147 148 149 150 151
152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167
168 169 170 171 172 173 174 175
176 177 178 179 180 181 182 183
184 185 186 187 188 189 190 191
192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207
208 209 210 211 212 213 214 215
216 217 218 219 220 221 222 223
224 225 226 227 228 229 230 231
232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <50>;
pwms = <&pwm0 0 25000 0>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
pwm-delay-us = <10000>;
status = "disabled";
};
panel: panel {
compatible = "simple-panel";
power-supply = <&vcc_io>;
backlight = <&backlight>;
enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
broken-cd;
bus-width = <8>;
cap-mmc-highspeed;
disable-wp;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc_flash>;
status = "okay";
};
&gmac {
phy-mode = "rgmii";
clock_in_out = "input";
snps,reset-gpio = <&gpio4 7 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c5>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
vdd_cpu: syr827@40 {
compatible = "silergy,syr827";
fcs,suspend-voltage-selector = <1>;
reg = <0x40>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
};
vdd_gpu: syr828@41 {
compatible = "silergy,syr828";
fcs,suspend-voltage-selector = <1>;
reg = <0x41>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio7>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
};
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_hold>;
system-power-controller;
regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vcc_io: REG2 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_log: REG3 {
regulator-name = "vdd_log";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vcc_20: REG4 {
regulator-name = "vcc_20";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
vccio_sd: REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd10_lcd: REG6 {
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcca_codec: REG7 {
regulator-name = "vcca_codec";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_tp: REG8 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vccio_pmu: REG9 {
regulator-name = "vccio_pmu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_10: REG10 {
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc18_lcd: REG12 {
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
act8846 {
pwr_hold: pwr-hold {
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
};
};
hym8563 {
rtc_int: rtc-int {
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
keys {
pwr_key: pwr-key {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_host {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm0 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_18>;
status = "okay";
};
&sdio0 {
broken-cd;
bus-width = <4>;
disable-wp;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
vmmc-supply = <&vcc_18>;
status = "disabled";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vccio_sd>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usb_host1 {
status = "okay";
};
&usb_otg {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
&mipi_dsi0 {
status = "disabled";
rockchip,panel = <&panel>;
display-timings {
timing0 {
bits-per-pixel = <24>;
clock-frequency = <160000000>;
hfront-porch = <120>;
hsync-len = <20>;
hback-porch = <21>;
hactive = <1200>;
vfront-porch = <21>;
vsync-len = <3>;
vback-porch = <18>;
vactive = <1920>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
&wdt {
status = "okay";
};