u-boot/include/configs/ts4600.h
Tom Rini a09fea1d28 env: Finish migration of common ENV options
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20 18:32:09 -05:00

61 lines
1.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 Savoir-faire Linux Inc.
*
* Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
*
* Derived from MX28EVK code by
* Fabio Estevam <fabio.estevam@freescale.com>
* Freescale Semiconductor, Inc.
*
* Configuration settings for the TS4600 Board
*/
#ifndef __CONFIGS_TS4600_H__
#define __CONFIGS_TS4600_H__
/* U-Boot Commands */
/* Memory configuration */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Environment */
/* Environment is in MMC */
#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/* Boot Linux */
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_addr=0x41000000\0" \
"loadkernel=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} imx28-ts4600.dtb\0" \
"loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot.ub\0" \
"bootscript=echo Running bootscript from mmc...; " \
"setenv mmcdev 0; " \
"setenv mmcpart 2; " \
"run loadbootscript && source ${loadaddr}; \0" \
"sdboot=echo Booting from SD card ...; " \
"setenv mmcdev 0; " \
"setenv mmcpart 2; " \
"setenv root /dev/mmcblk0p3; " \
"run loadkernel && run loadfdt; \0" \
"startbootsequence=run bootscript || run sdboot \0" \
#define CONFIG_BOOTCOMMAND \
"mmc rescan; " \
"run startbootsequence; " \
"setenv cmdline_append console=ttyAMA0,115200; " \
"setenv bootargs root=${root} rootwait rw ${cmdline_append}; " \
"bootz ${loadaddr} - ${fdt_addr}; "
/* The rest of the configuration is shared */
#include <configs/mxs.h>
#endif /* __CONFIGS_TS4600_H__ */