u-boot/tools/env/fw_env.config
Waldemar Brodkorb de19eddf6c add example for file on VFAT filesystem usage
For example on a raspberry pi the u-boot environment can be
saved in a file on the first VFAT partition.
This example illustrates how to use it with fw_printenv/fw_setenv.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-02-17 06:27:44 -05:00

25 lines
882 B
Text

# Configuration file for fw_(printenv/setenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
# Futhermore, if the Flash sector size is ommitted, this value is assumed to
# be the same as the Environment size, which is valid for NOR and SPI-dataflash
# NOR example
# MTD device name Device offset Env. size Flash sector size Number of sectors
/dev/mtd1 0x0000 0x4000 0x4000
/dev/mtd2 0x0000 0x4000 0x4000
# MTD SPI-dataflash example
# MTD device name Device offset Env. size Flash sector size Number of sectors
#/dev/mtd5 0x4200 0x4200
#/dev/mtd6 0x4200 0x4200
# NAND example
#/dev/mtd0 0x4000 0x4000 0x20000 2
# Block device example
#/dev/mmcblk0 0xc0000 0x20000
# VFAT example
#/boot/uboot.env 0x0000 0x4000