mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
b5900a58ca
Since Gen3 SDHI has an internal DS signal AC-spec violation in HS400 mode, CRC-error may occur in read command in HS400 mode. This phoenomenon occurs at low/high temperature. To fix this, after completion of HS400 tuning, enable manual calibration. However, Gen3 M3 Ver.1.2 or earlier and H3 1.x does not support HS400. These SoC forcibly use HS200 mode by SoC attribute. The DT adjustment of the tuning parameters is not supported until the DT property names become clear. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Adapted from a patch by Takeshi Saito <takeshi.saito.xv@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Peng Fan <peng.fan@nxp.com>
704 lines
19 KiB
C
704 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <fdtdec.h>
|
|
#include <mmc.h>
|
|
#include <dm.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/dma-direction.h>
|
|
#include <linux/io.h>
|
|
#include <linux/sizes.h>
|
|
#include <power/regulator.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "tmio-common.h"
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
|
|
/* SCC registers */
|
|
#define RENESAS_SDHI_SCC_DTCNTL 0x800
|
|
#define RENESAS_SDHI_SCC_DTCNTL_TAPEN BIT(0)
|
|
#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16
|
|
#define RENESAS_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff
|
|
#define RENESAS_SDHI_SCC_TAPSET 0x804
|
|
#define RENESAS_SDHI_SCC_DT2FF 0x808
|
|
#define RENESAS_SDHI_SCC_CKSEL 0x80c
|
|
#define RENESAS_SDHI_SCC_CKSEL_DTSEL BIT(0)
|
|
#define RENESAS_SDHI_SCC_RVSCNTL 0x810
|
|
#define RENESAS_SDHI_SCC_RVSCNTL_RVSEN BIT(0)
|
|
#define RENESAS_SDHI_SCC_RVSREQ 0x814
|
|
#define RENESAS_SDHI_SCC_RVSREQ_RVSERR BIT(2)
|
|
#define RENESAS_SDHI_SCC_SMPCMP 0x818
|
|
#define RENESAS_SDHI_SCC_TMPPORT2 0x81c
|
|
#define RENESAS_SDHI_SCC_TMPPORT2_HS400EN BIT(31)
|
|
#define RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL BIT(4)
|
|
#define RENESAS_SDHI_SCC_TMPPORT3 0x828
|
|
#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_0 3
|
|
#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_1 2
|
|
#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_2 1
|
|
#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_3 0
|
|
#define RENESAS_SDHI_SCC_TMPPORT3_OFFSET_MASK 0x3
|
|
#define RENESAS_SDHI_SCC_TMPPORT4 0x82c
|
|
#define RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START BIT(0)
|
|
#define RENESAS_SDHI_SCC_TMPPORT5 0x830
|
|
#define RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R BIT(8)
|
|
#define RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W (0 << 8)
|
|
#define RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK 0x3F
|
|
#define RENESAS_SDHI_SCC_TMPPORT6 0x834
|
|
#define RENESAS_SDHI_SCC_TMPPORT7 0x838
|
|
#define RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE 0xa5000000
|
|
#define RENESAS_SDHI_SCC_TMPPORT_CALIB_CODE_MASK 0x1f
|
|
#define RENESAS_SDHI_SCC_TMPPORT_MANUAL_MODE BIT(7)
|
|
|
|
#define RENESAS_SDHI_MAX_TAP 3
|
|
|
|
static u32 sd_scc_tmpport_read32(struct tmio_sd_priv *priv, u32 addr)
|
|
{
|
|
/* read mode */
|
|
tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R |
|
|
(RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr),
|
|
RENESAS_SDHI_SCC_TMPPORT5);
|
|
|
|
/* access start and stop */
|
|
tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START,
|
|
RENESAS_SDHI_SCC_TMPPORT4);
|
|
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT4);
|
|
|
|
return tmio_sd_readl(priv, RENESAS_SDHI_SCC_TMPPORT7);
|
|
}
|
|
|
|
static void sd_scc_tmpport_write32(struct tmio_sd_priv *priv, u32 addr, u32 val)
|
|
{
|
|
/* write mode */
|
|
tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W |
|
|
(RENESAS_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr),
|
|
RENESAS_SDHI_SCC_TMPPORT5);
|
|
tmio_sd_writel(priv, val, RENESAS_SDHI_SCC_TMPPORT6);
|
|
|
|
/* access start and stop */
|
|
tmio_sd_writel(priv, RENESAS_SDHI_SCC_TMPPORT4_DLL_ACC_START,
|
|
RENESAS_SDHI_SCC_TMPPORT4);
|
|
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT4);
|
|
}
|
|
|
|
static void renesas_sdhi_adjust_hs400_mode_enable(struct tmio_sd_priv *priv)
|
|
{
|
|
u32 calib_code;
|
|
|
|
if (!priv->adjust_hs400_enable)
|
|
return;
|
|
|
|
if (!priv->needs_adjust_hs400)
|
|
return;
|
|
|
|
/*
|
|
* Enabled Manual adjust HS400 mode
|
|
*
|
|
* 1) Disabled Write Protect
|
|
* W(addr=0x00, WP_DISABLE_CODE)
|
|
* 2) Read Calibration code and adjust
|
|
* R(addr=0x26) - adjust value
|
|
* 3) Enabled Manual Calibration
|
|
* W(addr=0x22, manual mode | Calibration code)
|
|
* 4) Set Offset value to TMPPORT3 Reg
|
|
*/
|
|
sd_scc_tmpport_write32(priv, 0x00,
|
|
RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
|
|
calib_code = sd_scc_tmpport_read32(priv, 0x26);
|
|
calib_code &= RENESAS_SDHI_SCC_TMPPORT_CALIB_CODE_MASK;
|
|
if (calib_code > priv->adjust_hs400_calibrate)
|
|
calib_code -= priv->adjust_hs400_calibrate;
|
|
else
|
|
calib_code = 0;
|
|
sd_scc_tmpport_write32(priv, 0x22,
|
|
RENESAS_SDHI_SCC_TMPPORT_MANUAL_MODE |
|
|
calib_code);
|
|
tmio_sd_writel(priv, priv->adjust_hs400_offset,
|
|
RENESAS_SDHI_SCC_TMPPORT3);
|
|
|
|
/* Clear flag */
|
|
priv->needs_adjust_hs400 = false;
|
|
}
|
|
|
|
static void renesas_sdhi_adjust_hs400_mode_disable(struct tmio_sd_priv *priv)
|
|
{
|
|
|
|
/* Disabled Manual adjust HS400 mode
|
|
*
|
|
* 1) Disabled Write Protect
|
|
* W(addr=0x00, WP_DISABLE_CODE)
|
|
* 2) Disabled Manual Calibration
|
|
* W(addr=0x22, 0)
|
|
* 3) Clear offset value to TMPPORT3 Reg
|
|
*/
|
|
sd_scc_tmpport_write32(priv, 0x00,
|
|
RENESAS_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
|
|
sd_scc_tmpport_write32(priv, 0x22, 0);
|
|
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_TMPPORT3);
|
|
}
|
|
|
|
static unsigned int renesas_sdhi_init_tuning(struct tmio_sd_priv *priv)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Initialize SCC */
|
|
tmio_sd_writel(priv, 0, TMIO_SD_INFO1);
|
|
|
|
reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
reg &= ~TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
|
|
|
|
/* Set sampling clock selection range */
|
|
tmio_sd_writel(priv, (0x8 << RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) |
|
|
RENESAS_SDHI_SCC_DTCNTL_TAPEN,
|
|
RENESAS_SDHI_SCC_DTCNTL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_CKSEL);
|
|
reg |= RENESAS_SDHI_SCC_CKSEL_DTSEL;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_CKSEL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);
|
|
reg &= ~RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
|
|
|
|
tmio_sd_writel(priv, 0x300 /* scc_tappos */,
|
|
RENESAS_SDHI_SCC_DT2FF);
|
|
|
|
reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
reg |= TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
|
|
|
|
/* Read TAPNUM */
|
|
return (tmio_sd_readl(priv, RENESAS_SDHI_SCC_DTCNTL) >>
|
|
RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) &
|
|
RENESAS_SDHI_SCC_DTCNTL_TAPNUM_MASK;
|
|
}
|
|
|
|
static void renesas_sdhi_reset_tuning(struct tmio_sd_priv *priv)
|
|
{
|
|
u32 reg;
|
|
|
|
/* Reset SCC */
|
|
reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
reg &= ~TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_CKSEL);
|
|
reg &= ~RENESAS_SDHI_SCC_CKSEL_DTSEL;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_CKSEL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_TMPPORT2);
|
|
reg &= ~(RENESAS_SDHI_SCC_TMPPORT2_HS400EN |
|
|
RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL);
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_TMPPORT2);
|
|
|
|
/* Disable HS400 mode adjustment */
|
|
renesas_sdhi_adjust_hs400_mode_disable(priv);
|
|
|
|
reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
reg |= TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);
|
|
reg &= ~RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);
|
|
reg &= ~RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
|
|
}
|
|
|
|
static int renesas_sdhi_hs400(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
bool hs400 = (mmc->selected_mode == MMC_HS_400);
|
|
int ret, taps = hs400 ? priv->nrtaps : 8;
|
|
u32 reg;
|
|
|
|
if (taps == 4) /* HS400 on 4tap SoC needs different clock */
|
|
ret = clk_set_rate(&priv->clk, 400000000);
|
|
else
|
|
ret = clk_set_rate(&priv->clk, 200000000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_RVSREQ);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_TMPPORT2);
|
|
if (hs400) {
|
|
reg |= RENESAS_SDHI_SCC_TMPPORT2_HS400EN |
|
|
RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL;
|
|
} else {
|
|
reg &= ~(RENESAS_SDHI_SCC_TMPPORT2_HS400EN |
|
|
RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL);
|
|
}
|
|
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_TMPPORT2);
|
|
|
|
/* Disable HS400 mode adjustment */
|
|
if (!hs400)
|
|
renesas_sdhi_adjust_hs400_mode_disable(priv);
|
|
|
|
tmio_sd_writel(priv, (0x8 << RENESAS_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) |
|
|
RENESAS_SDHI_SCC_DTCNTL_TAPEN,
|
|
RENESAS_SDHI_SCC_DTCNTL);
|
|
|
|
if (taps == 4) {
|
|
tmio_sd_writel(priv, priv->tap_set >> 1,
|
|
RENESAS_SDHI_SCC_TAPSET);
|
|
} else {
|
|
tmio_sd_writel(priv, priv->tap_set, RENESAS_SDHI_SCC_TAPSET);
|
|
}
|
|
|
|
tmio_sd_writel(priv, hs400 ? 0x704 : 0x300,
|
|
RENESAS_SDHI_SCC_DT2FF);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_CKSEL);
|
|
reg |= RENESAS_SDHI_SCC_CKSEL_DTSEL;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_CKSEL);
|
|
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);
|
|
reg |= RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
|
|
|
|
/* Execute adjust hs400 offset after setting to HS400 mode */
|
|
if (hs400)
|
|
priv->needs_adjust_hs400 = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void renesas_sdhi_prepare_tuning(struct tmio_sd_priv *priv,
|
|
unsigned long tap)
|
|
{
|
|
/* Set sampling clock position */
|
|
tmio_sd_writel(priv, tap, RENESAS_SDHI_SCC_TAPSET);
|
|
}
|
|
|
|
static unsigned int renesas_sdhi_compare_scc_data(struct tmio_sd_priv *priv)
|
|
{
|
|
/* Get comparison of sampling data */
|
|
return tmio_sd_readl(priv, RENESAS_SDHI_SCC_SMPCMP);
|
|
}
|
|
|
|
static int renesas_sdhi_select_tuning(struct tmio_sd_priv *priv,
|
|
unsigned int tap_num, unsigned int taps,
|
|
unsigned int smpcmp)
|
|
{
|
|
unsigned long tap_cnt; /* counter of tuning success */
|
|
unsigned long tap_start;/* start position of tuning success */
|
|
unsigned long tap_end; /* end position of tuning success */
|
|
unsigned long ntap; /* temporary counter of tuning success */
|
|
unsigned long match_cnt;/* counter of matching data */
|
|
unsigned long i;
|
|
bool select = false;
|
|
u32 reg;
|
|
|
|
priv->needs_adjust_hs400 = false;
|
|
|
|
/* Clear SCC_RVSREQ */
|
|
tmio_sd_writel(priv, 0, RENESAS_SDHI_SCC_RVSREQ);
|
|
|
|
/* Merge the results */
|
|
for (i = 0; i < tap_num * 2; i++) {
|
|
if (!(taps & BIT(i))) {
|
|
taps &= ~BIT(i % tap_num);
|
|
taps &= ~BIT((i % tap_num) + tap_num);
|
|
}
|
|
if (!(smpcmp & BIT(i))) {
|
|
smpcmp &= ~BIT(i % tap_num);
|
|
smpcmp &= ~BIT((i % tap_num) + tap_num);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Find the longest consecutive run of successful probes. If that
|
|
* is more than RENESAS_SDHI_MAX_TAP probes long then use the
|
|
* center index as the tap.
|
|
*/
|
|
tap_cnt = 0;
|
|
ntap = 0;
|
|
tap_start = 0;
|
|
tap_end = 0;
|
|
for (i = 0; i < tap_num * 2; i++) {
|
|
if (taps & BIT(i))
|
|
ntap++;
|
|
else {
|
|
if (ntap > tap_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
tap_cnt = ntap;
|
|
}
|
|
ntap = 0;
|
|
}
|
|
}
|
|
|
|
if (ntap > tap_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
tap_cnt = ntap;
|
|
}
|
|
|
|
/*
|
|
* If all of the TAP is OK, the sampling clock position is selected by
|
|
* identifying the change point of data.
|
|
*/
|
|
if (tap_cnt == tap_num * 2) {
|
|
match_cnt = 0;
|
|
ntap = 0;
|
|
tap_start = 0;
|
|
tap_end = 0;
|
|
for (i = 0; i < tap_num * 2; i++) {
|
|
if (smpcmp & BIT(i))
|
|
ntap++;
|
|
else {
|
|
if (ntap > match_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
match_cnt = ntap;
|
|
}
|
|
ntap = 0;
|
|
}
|
|
}
|
|
if (ntap > match_cnt) {
|
|
tap_start = i - ntap;
|
|
tap_end = i - 1;
|
|
match_cnt = ntap;
|
|
}
|
|
if (match_cnt)
|
|
select = true;
|
|
} else if (tap_cnt >= RENESAS_SDHI_MAX_TAP)
|
|
select = true;
|
|
|
|
if (select)
|
|
priv->tap_set = ((tap_start + tap_end) / 2) % tap_num;
|
|
else
|
|
return -EIO;
|
|
|
|
/* Set SCC */
|
|
tmio_sd_writel(priv, priv->tap_set, RENESAS_SDHI_SCC_TAPSET);
|
|
|
|
/* Enable auto re-tuning */
|
|
reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_RVSCNTL);
|
|
reg |= RENESAS_SDHI_SCC_RVSCNTL_RVSEN;
|
|
tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_RVSCNTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int renesas_sdhi_execute_tuning(struct udevice *dev, uint opcode)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct mmc *mmc = upriv->mmc;
|
|
unsigned int tap_num;
|
|
unsigned int taps = 0, smpcmp = 0;
|
|
int i, ret = 0;
|
|
u32 caps;
|
|
|
|
/* Only supported on Renesas RCar */
|
|
if (!(priv->caps & TMIO_SD_CAP_RCAR_UHS))
|
|
return -EINVAL;
|
|
|
|
/* clock tuning is not needed for upto 52MHz */
|
|
if (!((mmc->selected_mode == MMC_HS_200) ||
|
|
(mmc->selected_mode == MMC_HS_400) ||
|
|
(mmc->selected_mode == UHS_SDR104) ||
|
|
(mmc->selected_mode == UHS_SDR50)))
|
|
return 0;
|
|
|
|
tap_num = renesas_sdhi_init_tuning(priv);
|
|
if (!tap_num)
|
|
/* Tuning is not supported */
|
|
goto out;
|
|
|
|
if (tap_num * 2 >= sizeof(taps) * 8) {
|
|
dev_err(dev,
|
|
"Too many taps, skipping tuning. Please consider updating size of taps field of tmio_mmc_host\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Issue CMD19 twice for each tap */
|
|
for (i = 0; i < 2 * tap_num; i++) {
|
|
renesas_sdhi_prepare_tuning(priv, i % tap_num);
|
|
|
|
/* Force PIO for the tuning */
|
|
caps = priv->caps;
|
|
priv->caps &= ~TMIO_SD_CAP_DMA_INTERNAL;
|
|
|
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
|
|
|
priv->caps = caps;
|
|
|
|
if (ret == 0)
|
|
taps |= BIT(i);
|
|
|
|
ret = renesas_sdhi_compare_scc_data(priv);
|
|
if (ret == 0)
|
|
smpcmp |= BIT(i);
|
|
|
|
mdelay(1);
|
|
}
|
|
|
|
ret = renesas_sdhi_select_tuning(priv, tap_num, taps, smpcmp);
|
|
|
|
out:
|
|
if (ret < 0) {
|
|
dev_warn(dev, "Tuning procedure failed\n");
|
|
renesas_sdhi_reset_tuning(priv);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
static int renesas_sdhi_hs400(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int renesas_sdhi_set_ios(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
/* Stop the clock before changing its rate to avoid a glitch signal */
|
|
tmp = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
|
|
tmp &= ~TMIO_SD_CLKCTL_SCLKEN;
|
|
tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
|
|
|
|
ret = renesas_sdhi_hs400(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = tmio_sd_set_ios(dev);
|
|
|
|
mdelay(10);
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
if ((priv->caps & TMIO_SD_CAP_RCAR_UHS) &&
|
|
(mmc->selected_mode != UHS_SDR104) &&
|
|
(mmc->selected_mode != MMC_HS_200) &&
|
|
(mmc->selected_mode != MMC_HS_400)) {
|
|
renesas_sdhi_reset_tuning(priv);
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
static int renesas_sdhi_wait_dat0(struct udevice *dev, int state, int timeout)
|
|
{
|
|
int ret = -ETIMEDOUT;
|
|
bool dat0_high;
|
|
bool target_dat0_high = !!state;
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
|
|
timeout = DIV_ROUND_UP(timeout, 10); /* check every 10 us. */
|
|
while (timeout--) {
|
|
dat0_high = !!(tmio_sd_readl(priv, TMIO_SD_INFO2) & TMIO_SD_INFO2_DAT0);
|
|
if (dat0_high == target_dat0_high) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int renesas_sdhi_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = tmio_sd_send_cmd(dev, cmd, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
|
|
if (cmd->cmdidx == MMC_CMD_SEND_STATUS)
|
|
renesas_sdhi_adjust_hs400_mode_enable(priv);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_mmc_ops renesas_sdhi_ops = {
|
|
.send_cmd = renesas_sdhi_send_cmd,
|
|
.set_ios = renesas_sdhi_set_ios,
|
|
.get_cd = tmio_sd_get_cd,
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
.execute_tuning = renesas_sdhi_execute_tuning,
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
|
|
.wait_dat0 = renesas_sdhi_wait_dat0,
|
|
#endif
|
|
};
|
|
|
|
#define RENESAS_GEN2_QUIRKS TMIO_SD_CAP_RCAR_GEN2
|
|
#define RENESAS_GEN3_QUIRKS \
|
|
TMIO_SD_CAP_64BIT | TMIO_SD_CAP_RCAR_GEN3 | TMIO_SD_CAP_RCAR_UHS
|
|
|
|
static const struct udevice_id renesas_sdhi_match[] = {
|
|
{ .compatible = "renesas,sdhi-r8a7790", .data = RENESAS_GEN2_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7791", .data = RENESAS_GEN2_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7792", .data = RENESAS_GEN2_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7793", .data = RENESAS_GEN2_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7794", .data = RENESAS_GEN2_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7795", .data = RENESAS_GEN3_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a7796", .data = RENESAS_GEN3_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a77965", .data = RENESAS_GEN3_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a77970", .data = RENESAS_GEN3_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a77990", .data = RENESAS_GEN3_QUIRKS },
|
|
{ .compatible = "renesas,sdhi-r8a77995", .data = RENESAS_GEN3_QUIRKS },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static ulong renesas_sdhi_clk_get_rate(struct tmio_sd_priv *priv)
|
|
{
|
|
return clk_get_rate(&priv->clk);
|
|
}
|
|
|
|
static void renesas_sdhi_filter_caps(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_plat *plat = dev_get_platdata(dev);
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!(priv->caps & TMIO_SD_CAP_RCAR_GEN3))
|
|
return;
|
|
|
|
/* HS400 is not supported on H3 ES1.x and M3W ES1.0,ES1.1,ES1.2 */
|
|
if (((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
|
|
(rmobile_get_cpu_rev_integer() <= 1)) ||
|
|
((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
|
|
(rmobile_get_cpu_rev_integer() == 1) &&
|
|
(rmobile_get_cpu_rev_fraction() <= 2)))
|
|
plat->cfg.host_caps &= ~MMC_MODE_HS400;
|
|
|
|
/* M3W ES1.x for x>2 can use HS400 with manual adjustment */
|
|
if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
|
|
(rmobile_get_cpu_rev_integer() == 1) &&
|
|
(rmobile_get_cpu_rev_fraction() > 2)) {
|
|
priv->adjust_hs400_enable = true;
|
|
priv->adjust_hs400_offset = 0;
|
|
priv->adjust_hs400_calibrate = 0x9;
|
|
}
|
|
|
|
/* M3N can use HS400 with manual adjustment */
|
|
if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77965) {
|
|
priv->adjust_hs400_enable = true;
|
|
priv->adjust_hs400_offset = 0;
|
|
priv->adjust_hs400_calibrate = 0x0;
|
|
}
|
|
|
|
/* E3 can use HS400 with manual adjustment */
|
|
if (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77990) {
|
|
priv->adjust_hs400_enable = true;
|
|
priv->adjust_hs400_offset = 0;
|
|
priv->adjust_hs400_calibrate = 0x2;
|
|
}
|
|
|
|
/* H3 ES2.0 uses 4 tuning taps */
|
|
if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
|
|
(rmobile_get_cpu_rev_integer() == 2))
|
|
priv->nrtaps = 4;
|
|
else
|
|
priv->nrtaps = 8;
|
|
|
|
/* H3 ES1.x and M3W ES1.0 uses bit 17 for DTRAEND */
|
|
if (((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
|
|
(rmobile_get_cpu_rev_integer() <= 1)) ||
|
|
((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
|
|
(rmobile_get_cpu_rev_integer() == 1) &&
|
|
(rmobile_get_cpu_rev_fraction() == 0)))
|
|
priv->read_poll_flag = TMIO_SD_DMA_INFO1_END_RD;
|
|
else
|
|
priv->read_poll_flag = TMIO_SD_DMA_INFO1_END_RD2;
|
|
}
|
|
|
|
static int renesas_sdhi_probe(struct udevice *dev)
|
|
{
|
|
struct tmio_sd_priv *priv = dev_get_priv(dev);
|
|
u32 quirks = dev_get_driver_data(dev);
|
|
struct fdt_resource reg_res;
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
int ret;
|
|
|
|
priv->clk_get_rate = renesas_sdhi_clk_get_rate;
|
|
|
|
if (quirks == RENESAS_GEN2_QUIRKS) {
|
|
ret = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev),
|
|
"reg", 0, ®_res);
|
|
if (ret < 0) {
|
|
dev_err(dev, "\"reg\" resource not found, ret=%i\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (fdt_resource_size(®_res) == 0x100)
|
|
quirks |= TMIO_SD_CAP_16BIT;
|
|
}
|
|
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get host clock\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set to max rate */
|
|
ret = clk_set_rate(&priv->clk, 200000000);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set rate for host clock\n");
|
|
clk_free(&priv->clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable host clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = tmio_sd_probe(dev, quirks);
|
|
|
|
renesas_sdhi_filter_caps(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
|
|
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
|
|
if (!ret && (priv->caps & TMIO_SD_CAP_RCAR_UHS))
|
|
renesas_sdhi_reset_tuning(priv);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
U_BOOT_DRIVER(renesas_sdhi) = {
|
|
.name = "renesas-sdhi",
|
|
.id = UCLASS_MMC,
|
|
.of_match = renesas_sdhi_match,
|
|
.bind = tmio_sd_bind,
|
|
.probe = renesas_sdhi_probe,
|
|
.priv_auto_alloc_size = sizeof(struct tmio_sd_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct tmio_sd_plat),
|
|
.ops = &renesas_sdhi_ops,
|
|
};
|