u-boot/drivers/mtd
kevin.morfitt@fearnside-systems.co.uk 3d1988ab47 Clean-up of s3c24x0 nand driver
This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes
to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
 - patches 1/4, 2/4 and 3/4 of this series

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
errors were found.

Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-10-13 21:13:57 -05:00
..
nand Clean-up of s3c24x0 nand driver 2009-10-13 21:13:57 -05:00
onenand s5pc1xx: support onenand driver 2009-10-13 21:13:55 -05:00
spi eeprom_m95xxx: remove unused variable i 2009-08-21 23:36:19 +02:00
ubi UBI: Fix build problem noticed on Apollon (arm/testing repo) 2009-07-07 16:33:44 +02:00
at45.c drivers/mtd: Move conditional compilation to Makefile 2008-08-13 01:40:42 +02:00
cfi_flash.c Support up to 7 banks for ids as specified in JEDEC JEP106Z 2009-08-26 08:58:27 +02:00
cfi_mtd.c mtd: cfi - if defined, use MAX_FLASH_BANKS_DETECT for static declarations 2009-07-16 15:27:45 +02:00
dataflash.c mtd/dataflash.c: fix a problem with the last partition 2008-12-02 21:53:24 +01:00
jedec_flash.c Support up to 7 banks for ids as specified in JEDEC JEP106Z 2009-08-26 08:58:27 +02:00
Makefile mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o 2009-06-12 20:45:47 +02:00
mtdconcat.c mtd: Add MTD concat support to concatenate multiple MTD NOR devices 2009-06-12 20:45:47 +02:00
mtdcore.c mtd: Remove a printf() from add_mtd_device(). 2008-11-24 11:29:53 +01:00
mtdpart.c mtd: Update MTD infrastructure to support 64bit device size 2009-06-12 20:45:47 +02:00
mw_eeprom.c Update i386 code (sc520_cdp) 2008-09-09 11:48:53 +02:00