u-boot/board/gth
Wolfgang Denk 7481266e4e
2005-12-12 16:06:05 +01:00
..
config.mk * Code cleanup: 2003-06-27 21:31:46 +00:00
ee_access.c Initial revision 2002-08-17 09:36:01 +00:00
ee_access.h Initial revision 2002-03-08 21:31:05 +00:00
ee_dev.h Initial revision 2002-03-08 21:31:05 +00:00
flash.c Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
gth.c Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Makefile * Code cleanup: 2003-06-27 21:31:46 +00:00
README * Code cleanup: 2003-06-27 21:31:46 +00:00
u-boot.lds 2005-12-12 16:06:05 +01:00

Written by Thomas.Lange@corelatus.com 010805

To make a system for gth that actually works ;-)
the variable TBASE needs to be set to 0,1 or 2
depending on location where image is supposed to
be started from.
E.g. make TBASE=1

0: Start from RAM, base 0

1: Start from flash_base + 0x10070

2: Start from flash_base + 0x30070

When using 1 or 2, the image is supposed to be launched
from miniboot that boots the first U-Boot image found in
flash.
For miniboot code, description, see www.opensource.se