mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
Kconfig | ||
m53017evb.c | ||
MAINTAINERS | ||
Makefile | ||
README |
Freescale MCF53017EVB ColdFire Development Board ================================================ TsiChung Liew(Tsi-Chung.Liew@freescale.com) Created 10/22/08 =========================================== Changed files: ============== - board/freescale/m53017evb/m53017evb.c Dram setup - board/freescale/m53017evb/mii.c Mii access - board/freescale/m53017evb/Makefile Makefile - board/freescale/m53017evb/config.mk config make - board/freescale/m53017evb/u-boot.lds Linker description - arch/m68k/cpu/mcf532x/cpu.c cpu specific code - arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs - arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support - arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock - arch/m68k/cpu/mcf532x/Makefile Makefile - arch/m68k/cpu/mcf532x/config.mk config make - arch/m68k/cpu/mcf532x/start.S start up assembly code - doc/README.m53017evb This readme file - drivers/net/mcffec.c ColdFire common FEC driver - drivers/net/mcfmii.c ColdFire common Mii driver - drivers/serial/mcfuart.c ColdFire common UART driver - drivers/rtc/mcfrtc.c Realtime clock Driver - include/asm-m68k/bitops.h Bit operation function export - include/asm-m68k/byteorder.h Byte order functions - include/asm-m68k/fec.h FEC structure and definition - include/asm-m68k/fsl_i2c.h I2C structure and definition - include/asm-m68k/global_data.h Global data structure - include/asm-m68k/immap.h ColdFire specific header file and driver macros - include/asm-m68k/immap_5301x.h mcf5301x specific header file - include/asm-m68k/io.h io functions - include/asm-m68k/m532x.h mcf5301x specific header file - include/asm-m68k/posix_types.h Posix - include/asm-m68k/processor.h header file - include/asm-m68k/ptrace.h Exception structure - include/asm-m68k/rtc.h Realtime clock header file - include/asm-m68k/string.h String function export - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition - include/asm-m68k/u-boot.h U-Boot structure - include/configs/M53017EVB.h Board specific configuration file - arch/m68k/lib/board.c board init function - arch/m68k/lib/cache.c - arch/m68k/lib/interrupts Coldfire common interrupt functions - arch/m68k/lib/m68k_linux.c - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) - arch/m68k/lib/traps.c Exception init code 1 MCF5301x specific Options/Settings ==================================== 1.1 pre-loader is no longer suppoer in thie coldfire family 1.2 Configuration settings for M53017EVB Development Board CONFIG_MCF5301x -- define for all MCF5301x CPUs CONFIG_M53015 -- define for MCF53015 CPUs CONFIG_M53017EVB -- define for M53017EVB board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged CONFIG_SYS_I2C_SPEED -- define for I2C speed CONFIG_SYS_I2C_SLAVE -- define for I2C slave address CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset CONFIG_SYS_IMMR -- define for MBAR offset CONFIG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. System memory map: Flash: 0x00000000-0x3FFFFFFF (1024MB) DDR: 0x40000000-0x7FFFFFFF (1024MB) SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xFC000000-0xFFFFFFFF (256MB) 2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) DDR: 0x40000000-0x4FFFFFFF (256MB) SRAM: 0x80000000-0x80007FFF (32KB) IP: 0xFC000000-0xFC0FFFFF (64KB) 3. COMPILATION ============== 3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or uClinux version) from codesourcery.com was used. Download it from: http://www.codesourcery.com/gnu_toolchains/coldfire/download.html 3.2 Compilation export CROSS_COMPILE=cross-compile-prefix cd u-boot make distclean make M53017EVB_config make 4. SCREEN DUMP ============== 4.1 M53017EVB Development board (NOTE: May not show exactly the same) U-Boot 2008.10 (Oct 22 2007 - 11:07:57) CPU: Freescale MCF53015 (Mask:76 Version:0) CPU CLK 240 Mhz BUS CLK 80 Mhz Board: Freescale M53017EVB I2C: ready DRAM: 64 MB FLASH: 16 MB In: serial Out: serial Err: serial NAND: 16 MiB Net: FEC0, FEC1 -> print bootdelay=1 baudrate=115200 ethaddr=00:e0:0c:bc:e5:60 hostname=M53017EVB netdev=eth0 loadaddr=40010000 u-boot=u-boot.bin load=tftp ${loadaddr) ${u-boot} upd=run load; run prog prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save gatewayip=192.168.1.1 netmask=255.255.255.0 ipaddr=192.168.1.3 serverip=192.168.1.2 stdin=serial stdout=serial stderr=serial mem=65024k Environment size: 437/4092 bytes ->