mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
---|---|---|
.. | ||
Kconfig | ||
m52277evb.c | ||
MAINTAINERS | ||
Makefile | ||
README |
Freescale MCF52277EVB ColdFire Development Board ================================================ TsiChung Liew(Tsi-Chung.Liew@freescale.com) Created Jan 8, 2008 =========================================== Changed files: ============== - board/freescale/m52277evb/m52277evb.c Dram setup - board/freescale/m52277evb/Makefile Makefile - board/freescale/m52277evb/config.mk config make - board/freescale/m52277evb/u-boot.lds Linker description - arch/m68k/cpu/mcf5227x/cpu.c cpu specific code - arch/m68k/cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs - arch/m68k/cpu/mcf5227x/interrupts.c cpu specific interrupt support - arch/m68k/cpu/mcf5227x/speed.c system, flexbus, and cpu clock - arch/m68k/cpu/mcf5227x/Makefile Makefile - arch/m68k/cpu/mcf5227x/config.mk config make - arch/m68k/cpu/mcf5227x/start.S start up assembly code - doc/README.m52277evb This readme file - drivers/serial/mcfuart.c ColdFire common UART driver - drivers/rtc/mcfrtc.c Realtime clock Driver - include/asm-m68k/bitops.h Bit operation function export - include/asm-m68k/byteorder.h Byte order functions - include/asm-m68k/crossbar.h CrossBar structure and definition - include/asm-m68k/dspi.h DSPI structure and definition - include/asm-m68k/edma.h eDMA structure and definition - include/asm-m68k/flexbus.h FlexBus structure and definition - include/asm-m68k/fsl_i2c.h I2C structure and definition - include/asm-m68k/global_data.h Global data structure - include/asm-m68k/immap.h ColdFire specific header file and driver macros - include/asm-m68k/immap_5227x.h mcf5227x specific header file - include/asm-m68k/io.h io functions - include/asm-m68k/lcd.h LCD structure and definition - include/asm-m68k/m5227x.h mcf5227x specific header file - include/asm-m68k/posix_types.h Posix - include/asm-m68k/processor.h header file - include/asm-m68k/ptrace.h Exception structure - include/asm-m68k/rtc.h Realtime clock header file - include/asm-m68k/ssi.h SSI structure and definition - include/asm-m68k/string.h String function export - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition - include/asm-m68k/u-boot.h U-Boot structure - include/configs/M52277EVB.h Board specific configuration file - arch/m68k/lib/board.c board init function - arch/m68k/lib/cache.c - arch/m68k/lib/interrupts Coldfire common interrupt functions - arch/m68k/lib/m68k_linux.c - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) - arch/m68k/lib/traps.c Exception init code 1 MCF52277 specific Options/Settings ==================================== 1.1 pre-loader is no longer suppoer in this coldfire family 1.2 Configuration settings for M52277EVB Development Board CONFIG_MCF5227x -- define for all MCF5227x CPUs CONFIG_M52277 -- define for all Freescale MCF52277 CPUs CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged CONFIG_SYS_I2C_SPEED -- define for I2C speed CONFIG_SYS_I2C_SLAVE -- define for I2C slave address CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset CONFIG_SYS_IMMR -- define for MBAR offset CONFIG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot, update will be provided at later time 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. System memory map: Flash: 0x00000000-0x3FFFFFFF (1024MB) DDR: 0x40000000-0x7FFFFFFF (1024MB) SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) 2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) DDR: 0x40000000-0x4FFFFFFF (64MB) SRAM: 0x80000000-0x80007FFF (32KB) IP: 0xFC000000-0xFC0FFFFF (64KB) 3. COMPILATION ============== 3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or uClinux version) from codesourcery.com was used. Download it from: http://www.codesourcery.com/gnu_toolchains/coldfire/download.html 3.2 Compilation export CROSS_COMPILE=cross-compile-prefix cd u-boot-1.x.x make distclean make M52277EVB_config make 4. SCREEN DUMP ============== 4.1 M52277EVB Development board (NOTE: May not show exactly the same) U-Boot 1.3.1 (Jan 8 2008 - 12:44:08) CPU: Freescale MCF52277 (Mask:6c Version:0) CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ INP CLK 16 Mhz VCO CLK 480 Mhz Board: Freescale 52277 EVB I2C: ready DRAM: 64 MB FLASH: 16 MB In: serial Out: serial Err: serial -> print baudrate=115200 hostname=M52277EVB inpclk=16000000 loadaddr=(0x40000000 + 0x10000) load=tftp ${loadaddr) ${u-boot} upd=run load; run prog prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save u-boot=u-boot.bin stdin=serial stdout=serial stderr=serial mem=65024k Environment size: 280/32764 bytes -> bdinfo memstart = 0x40000000 memsize = 0x04000000 flashstart = 0x00000000 flashsize = 0x01000000 flashoffset = 0x00000000 sramstart = 0x80000000 sramsize = 0x00008000 mbar = 0xFC000000 busfreq = 80 MHz flbfreq = 80 Mhz inpfreq = 16 Mhz vcofreq = 480 Mhz baudrate = 115200 bps -> -> help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation date - get/set/reset date & time dcache - enable or disable data cache echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information go - start application at address 'addr' help - print online help i2c - I2C sub-system icache - enable or disable instruction cache iminfo - print header information for application image imls - list all images found in flash itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range ls - list files in a directory (default /) md - memory display mm - memory modify (auto-incrementing) mtest - simple RAM test mw - memory write (fill) nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable FLASH write protection reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time source - run script from memory version - print monitor version ->