mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
7194ab8095
All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111 - cleaned up line lengths - modified all boards that override weak function in this driver - modified all eeprom standalone apps to work with new driver - updated blackfin standalone EEPROM app after testing Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
129 lines
2.9 KiB
C
129 lines
2.9 KiB
C
/*
|
|
* (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <flash.h>
|
|
#include <nand.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_init(void)
|
|
{
|
|
/* arch number of NetStar board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0x10000100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
/* Take the Ethernet controller out of reset and wait
|
|
* for the EEPROM load to complete. */
|
|
*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
|
|
udelay(10); /* doesn't work before timer_init call */
|
|
*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
|
|
udelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#if defined(CONFIG_RTC_DS1307)
|
|
/* enable trickle charge */
|
|
i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_FLASH)
|
|
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
|
|
{
|
|
if (banknum == 0) { /* AM29LV800 boot flash */
|
|
info->portwidth = FLASH_CFI_16BIT;
|
|
info->chipwidth = FLASH_CFI_BY16;
|
|
info->interface = FLASH_CFI_X16;
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
/*
|
|
* hardware specific access to control-lines
|
|
*
|
|
* NAND_NCE: bit 0 - don't care
|
|
* NAND_CLE: bit 1 -> bit 1 (0x0002)
|
|
* NAND_ALE: bit 2 -> bit 2 (0x0004)
|
|
*/
|
|
static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
unsigned long mask;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
mask = (ctrl & NAND_CLE) ? 0x02 : 0;
|
|
if (ctrl & NAND_ALE)
|
|
mask |= 0x04;
|
|
writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
nand->options = NAND_SAMSUNG_LP_OPTIONS;
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
nand->cmd_ctrl = netstar_nand_hwcontrol;
|
|
nand->chip_delay = 400;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_SMC91111
|
|
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
#endif
|