u-boot/doc/device-tree-bindings/mtd/spi/spi-flash.txt
Simon Glass 0b304a2494 sandbox: dts: Add a SPI device and cros_ec device
Add a SPI device which can be used for testing SPI flash features in
sandbox.

Also add a cros_ec device since with driver model the Chrome OS EC
emulation will not otherwise be available.

Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 10:36:45 -06:00

25 lines
886 B
Text

* MTD SPI driver for serial flash chips
Required properties:
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
- compatible : Should be the manufacturer and the name of the chip. Bear in
mind that the DT binding is not U-Boot-only, but in case of
U-Boot, see spi_flash_params_table table in
drivers/mtd/spi/sf_params.c for the list of supported chips.
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
Optional properties:
- memory-map : Address and size of the flash, if memory mapped. This may
apply to Intel chipsets, which tend to memory-map flash.
Example:
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <40000000>;
};