u-boot/include/configs/stv0991.h
Masahiro Yamada e856bdcfb4 flash: complete CONFIG_SYS_NO_FLASH move with renaming
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.

During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
make the code more readable.  Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.

This commit was created as follows:

[1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

[3] Rename the instances in defconfigs by the following:
  find . -path './configs/*_defconfig' | xargs sed -i \
  -e '/CONFIG_SYS_NO_FLASH=y/d' \
  -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

[4] Change the conditionals by the following:
  find . -name '*.[ch]' | xargs sed -i \
  -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
  -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
  -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
  -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

[5] Modify the following manually
  - Rename the rest of instances
  - Remove the description from README
  - Create the new Kconfig entry in drivers/mtd/Kconfig
  - Remove the old Kconfig entry from common/Kconfig
  - Remove the garbage comments from include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:25 -05:00

78 lines
2.1 KiB
C

/*
* (C) Copyright 2014
* Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_STV0991_H
#define __CONFIG_STV0991_H
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CORTEX_R4
/* ram memory-related information */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define PHYS_SDRAM_1_SIZE 0x00198000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET 0x30000
#define CONFIG_ENV_ADDR \
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
/* serial port (PL011) configuration */
#define CONFIG_BAUDRATE 115200
#define CONFIG_PL01X_SERIAL
/* user interface */
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+sizeof(CONFIG_SYS_PROMPT) + 16)
/* MISC */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/* U-Boot Load Address */
#define CONFIG_SYS_TEXT_BASE 0x00010000
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* GMAC related configs */
#define CONFIG_MII
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_PHY_MICREL
/* Command support defines */
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_SYS_MEMTEST_START 0x0000
#define CONFIG_SYS_MEMTEST_END 1024*1024
/* Misc configuration */
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_BOOTCOMMAND "go 0x40040000"
/*
+ * QSPI support
+ */
#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */
#define CONFIG_CQSPI_DECODER 0
#define CONFIG_CQSPI_REF_CLK ((30/4)/2)*1000*1000
#define CONFIG_BOUNCE_BUFFER
#endif
#endif /* __CONFIG_H */