u-boot/board/altera/socfpga/qts/pinmux_config.h
Marek Vasut 9617ceb9cf arm: socfpga: Move generated files into qts subdir
Move all the files generated by Quartus into the qts/ subdir of the
board/altera/socfpga dir to make them explicitly separate from the
generic U-Boot code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08 14:14:04 +02:00

54 lines
1.5 KiB
C

/* This file is generated by Preloader Generator */
#ifndef _PRELOADER_PINMUX_CONFIG_H_
#define _PRELOADER_PINMUX_CONFIG_H_
/*
* State of enabling for which IP connected out through the muxing.
* Value 1 mean the IP connection is muxed out
*/
#define CONFIG_HPS_EMAC0 (1)
#define CONFIG_HPS_EMAC1 (0)
#define CONFIG_HPS_USB0 (0)
#define CONFIG_HPS_USB1 (1)
#define CONFIG_HPS_NAND (0)
#define CONFIG_HPS_SDMMC (1)
#define CONFIG_HPS_QSPI (0)
#define CONFIG_HPS_UART0 (1)
#define CONFIG_HPS_UART1 (0)
#define CONFIG_HPS_TRACE (0)
#define CONFIG_HPS_I2C0 (1)
#define CONFIG_HPS_I2C1 (0)
#define CONFIG_HPS_I2C2 (0)
#define CONFIG_HPS_I2C3 (0)
#define CONFIG_HPS_SPIM0 (0)
#define CONFIG_HPS_SPIM1 (0)
#define CONFIG_HPS_SPIS0 (0)
#define CONFIG_HPS_SPIS1 (0)
#define CONFIG_HPS_CAN0 (1)
#define CONFIG_HPS_CAN1 (0)
/* IP attribute value (which affected by pin muxing configuration) */
#define CONFIG_HPS_SDMMC_BUSWIDTH (8)
/* 1 if the pins are connected out */
#define CONFIG_HPS_QSPI_CS0 (0)
#define CONFIG_HPS_QSPI_CS1 (0)
#define CONFIG_HPS_QSPI_CS2 (0)
#define CONFIG_HPS_QSPI_CS3 (0)
/* UART */
/* 1 means the pin is mux out or available */
#define CONFIG_HPS_UART0_TX (1)
#define CONFIG_HPS_UART0_RX (1)
#define CONFIG_HPS_UART0_CTS (0)
#define CONFIG_HPS_UART0_RTS (0)
#define CONFIG_HPS_UART1_TX (0)
#define CONFIG_HPS_UART1_RX (0)
#define CONFIG_HPS_UART1_CTS (0)
#define CONFIG_HPS_UART1_RTS (0)
/* Pin mux data */
#define CONFIG_HPS_PINMUX_NUM (207)
#endif /* _PRELOADER_PINMUX_CONFIG_H_ */