mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 01:03:05 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
302 lines
7.8 KiB
C
302 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2016 Google, Inc
|
|
*
|
|
* From coreboot src/soc/intel/broadwell/romstage/raminit.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <pci.h>
|
|
#include <syscon.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/lpc_common.h>
|
|
#include <asm/mrccache.h>
|
|
#include <asm/mrc_common.h>
|
|
#include <asm/mtrr.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/arch/iomap.h>
|
|
#include <asm/arch/me.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/arch/pei_data.h>
|
|
#include <asm/arch/pm.h>
|
|
|
|
ulong board_get_usable_ram_top(ulong total_size)
|
|
{
|
|
return mrc_common_board_get_usable_ram_top(total_size);
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
mrc_common_dram_init_banksize();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void broadwell_fill_pei_data(struct pei_data *pei_data)
|
|
{
|
|
pei_data->pei_version = PEI_VERSION;
|
|
pei_data->board_type = BOARD_TYPE_ULT;
|
|
pei_data->pciexbar = MCFG_BASE_ADDRESS;
|
|
pei_data->smbusbar = SMBUS_BASE_ADDRESS;
|
|
pei_data->ehcibar = EARLY_EHCI_BAR;
|
|
pei_data->xhcibar = EARLY_XHCI_BAR;
|
|
pei_data->gttbar = EARLY_GTT_BAR;
|
|
pei_data->pmbase = ACPI_BASE_ADDRESS;
|
|
pei_data->gpiobase = GPIO_BASE_ADDRESS;
|
|
pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
|
|
pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
|
|
pei_data->tx_byte = sdram_console_tx_byte;
|
|
pei_data->ddr_refresh_2x = 1;
|
|
}
|
|
|
|
static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
|
|
uint16_t length, uint8_t enable,
|
|
uint8_t oc_pin, uint8_t location)
|
|
{
|
|
pei_data->usb2_ports[port].length = length;
|
|
pei_data->usb2_ports[port].enable = enable;
|
|
pei_data->usb2_ports[port].oc_pin = oc_pin;
|
|
pei_data->usb2_ports[port].location = location;
|
|
}
|
|
|
|
static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
|
|
uint8_t enable, uint8_t oc_pin,
|
|
uint8_t fixed_eq)
|
|
{
|
|
pei_data->usb3_ports[port].enable = enable;
|
|
pei_data->usb3_ports[port].oc_pin = oc_pin;
|
|
pei_data->usb3_ports[port].fixed_eq = fixed_eq;
|
|
}
|
|
|
|
void mainboard_fill_pei_data(struct pei_data *pei_data)
|
|
{
|
|
/* DQ byte map for Samus board */
|
|
const u8 dq_map[2][6][2] = {
|
|
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
|
|
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
|
|
{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
|
|
{ 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
|
|
/* DQS CPU<>DRAM map for Samus board */
|
|
const u8 dqs_map[2][8] = {
|
|
{ 2, 0, 1, 3, 6, 4, 7, 5 },
|
|
{ 2, 1, 0, 3, 6, 5, 4, 7 } };
|
|
|
|
pei_data->ec_present = 1;
|
|
|
|
/* One installed DIMM per channel */
|
|
pei_data->dimm_channel0_disabled = 2;
|
|
pei_data->dimm_channel1_disabled = 2;
|
|
|
|
memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
|
|
memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
|
|
|
|
/* P0: HOST PORT */
|
|
pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P1: HOST PORT */
|
|
pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P2: RAIDEN */
|
|
pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P3: SD CARD */
|
|
pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
/* P4: RAIDEN */
|
|
pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_BACK_PANEL);
|
|
/* P5: WWAN (Disabled) */
|
|
pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
|
|
USB_PORT_SKIP);
|
|
/* P6: CAMERA */
|
|
pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
/* P7: BT */
|
|
pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
|
|
USB_PORT_INTERNAL);
|
|
|
|
/* P1: HOST PORT */
|
|
pei_data_usb3_port(pei_data, 0, 1, 0, 0);
|
|
/* P2: HOST PORT */
|
|
pei_data_usb3_port(pei_data, 1, 1, 1, 0);
|
|
/* P3: RAIDEN */
|
|
pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
|
|
/* P4: RAIDEN */
|
|
pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
|
|
}
|
|
|
|
static unsigned long get_top_of_ram(struct udevice *dev)
|
|
{
|
|
/*
|
|
* Base of DPR is top of usable DRAM below 4GiB. The register has
|
|
* 1 MiB alignment and reports the TOP of the range, the base
|
|
* must be calculated from the size in MiB in bits 11:4.
|
|
*/
|
|
u32 dpr, tom;
|
|
|
|
dm_pci_read_config32(dev, DPR, &dpr);
|
|
tom = dpr & ~((1 << 20) - 1);
|
|
|
|
debug("dpt %08x tom %08x\n", dpr, tom);
|
|
/* Subtract DMA Protected Range size if enabled */
|
|
if (dpr & DPR_EPM)
|
|
tom -= (dpr & DPR_SIZE_MASK) << 16;
|
|
|
|
return (unsigned long)tom;
|
|
}
|
|
|
|
/**
|
|
* sdram_find() - Find available memory
|
|
*
|
|
* This is a bit complicated since on x86 there are system memory holes all
|
|
* over the place. We create a list of available memory blocks
|
|
*
|
|
* @dev: Northbridge device
|
|
*/
|
|
static int sdram_find(struct udevice *dev)
|
|
{
|
|
struct memory_info *info = &gd->arch.meminfo;
|
|
ulong top_of_ram;
|
|
|
|
top_of_ram = get_top_of_ram(dev);
|
|
mrc_add_memory_area(info, 0, top_of_ram);
|
|
|
|
/* Add MTRRs for memory */
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prepare_mrc_cache(struct pei_data *pei_data)
|
|
{
|
|
struct mrc_data_container *mrc_cache;
|
|
struct mrc_region entry;
|
|
int ret;
|
|
|
|
ret = mrccache_get_region(NULL, &entry);
|
|
if (ret)
|
|
return ret;
|
|
mrc_cache = mrccache_find_current(&entry);
|
|
if (!mrc_cache)
|
|
return -ENOENT;
|
|
|
|
pei_data->saved_data = mrc_cache->data;
|
|
pei_data->saved_data_size = mrc_cache->data_size;
|
|
debug("%s: at %p, size %x checksum %04x\n", __func__,
|
|
pei_data->saved_data, pei_data->saved_data_size,
|
|
mrc_cache->checksum);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
struct pei_data _pei_data __aligned(8);
|
|
struct pei_data *pei_data = &_pei_data;
|
|
struct udevice *dev, *me_dev, *pch_dev;
|
|
struct chipset_power_state ps;
|
|
const void *spd_data;
|
|
int ret, size;
|
|
|
|
memset(pei_data, '\0', sizeof(struct pei_data));
|
|
|
|
/* Print ME state before MRC */
|
|
ret = syscon_get_by_driver_data(X86_SYSCON_ME, &me_dev);
|
|
if (ret)
|
|
return ret;
|
|
intel_me_status(me_dev);
|
|
|
|
/* Save ME HSIO version */
|
|
ret = uclass_first_device(UCLASS_PCH, &pch_dev);
|
|
if (ret)
|
|
return ret;
|
|
if (!pch_dev)
|
|
return -ENODEV;
|
|
power_state_get(pch_dev, &ps);
|
|
|
|
intel_me_hsio_version(me_dev, &ps.hsio_version, &ps.hsio_checksum);
|
|
|
|
broadwell_fill_pei_data(pei_data);
|
|
mainboard_fill_pei_data(pei_data);
|
|
|
|
ret = uclass_first_device(UCLASS_NORTHBRIDGE, &dev);
|
|
if (ret)
|
|
return ret;
|
|
if (!dev)
|
|
return -ENODEV;
|
|
size = 256;
|
|
ret = mrc_locate_spd(dev, size, &spd_data);
|
|
if (ret)
|
|
return ret;
|
|
memcpy(pei_data->spd_data[0][0], spd_data, size);
|
|
memcpy(pei_data->spd_data[1][0], spd_data, size);
|
|
|
|
ret = prepare_mrc_cache(pei_data);
|
|
if (ret)
|
|
debug("prepare_mrc_cache failed: %d\n", ret);
|
|
|
|
debug("PEI version %#x\n", pei_data->pei_version);
|
|
ret = mrc_common_init(dev, pei_data, true);
|
|
if (ret)
|
|
return ret;
|
|
debug("Memory init done\n");
|
|
|
|
ret = sdram_find(dev);
|
|
if (ret)
|
|
return ret;
|
|
gd->ram_size = gd->arch.meminfo.total_32bit_memory;
|
|
debug("RAM size %llx\n", (unsigned long long)gd->ram_size);
|
|
|
|
debug("MRC output data length %#x at %p\n", pei_data->data_to_save_size,
|
|
pei_data->data_to_save);
|
|
/* S3 resume: don't save scrambler seed or MRC data */
|
|
if (pei_data->boot_mode != SLEEP_STATE_S3) {
|
|
/*
|
|
* This will be copied to SDRAM in reserve_arch(), then written
|
|
* to SPI flash in mrccache_save()
|
|
*/
|
|
gd->arch.mrc_output = (char *)pei_data->data_to_save;
|
|
gd->arch.mrc_output_len = pei_data->data_to_save_size;
|
|
}
|
|
gd->arch.pei_meminfo = pei_data->meminfo;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Use this hook to save our SDRAM parameters */
|
|
int misc_init_r(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = mrccache_save();
|
|
if (ret)
|
|
printf("Unable to save MRC data: %d\n", ret);
|
|
else
|
|
debug("Saved MRC cache data\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
struct udevice *bus = NULL;
|
|
|
|
/* com1 / com2 decode range */
|
|
pci_x86_write_config(bus, PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16);
|
|
|
|
pci_x86_write_config(bus, PCH_DEV_LPC, LPC_EN, COMA_LPC_EN,
|
|
PCI_SIZE_16);
|
|
}
|
|
|
|
static const struct udevice_id broadwell_syscon_ids[] = {
|
|
{ .compatible = "intel,me", .data = X86_SYSCON_ME },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(syscon_intel_me) = {
|
|
.name = "intel_me_syscon",
|
|
.id = UCLASS_SYSCON,
|
|
.of_match = broadwell_syscon_ids,
|
|
};
|