mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
2be296538e
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
135 lines
4.1 KiB
C
135 lines
4.1 KiB
C
/*
|
|
* (C) Copyright 2014
|
|
* Texas Instruments Incorporated.
|
|
* Felipe Balbi <balbi@ti.com>
|
|
*
|
|
* Configuration settings for the TI Beagle x15 board.
|
|
* See ti_omap5_common.h for omap5 common settings.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_AM57XX_EVM_H
|
|
#define __CONFIG_AM57XX_EVM_H
|
|
|
|
#include <environment/ti/dfu.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_IODELAY_RECALIBRATION
|
|
#endif
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
/* MMC ENV related defines */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */
|
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
|
#define CONFIG_ENV_SIZE SZ_128K
|
|
#define CONFIG_ENV_OFFSET 0x260000
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
#define CONSOLEDEV "ttyO2"
|
|
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
|
|
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
#define CONFIG_SYS_OMAP_ABE_SYSCK
|
|
|
|
/* Define the default GPT table for eMMC */
|
|
#define PARTS_DEFAULT \
|
|
/* Linux partitions */ \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
|
|
/* Android partitions */ \
|
|
"partitions_android=" \
|
|
"uuid_disk=${uuid_gpt_disk};" \
|
|
"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
|
|
"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
|
|
"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
|
|
"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
|
|
"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
|
|
"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
|
|
"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
|
|
"name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
|
|
"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
|
|
"name=system,size=768M,uuid=${uuid_gpt_system};" \
|
|
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
|
|
"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
|
|
"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
|
|
"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
|
|
|
|
#define DFUARGS \
|
|
"dfu_bufsiz=0x10000\0" \
|
|
DFU_ALT_INFO_MMC \
|
|
DFU_ALT_INFO_EMMC \
|
|
DFU_ALT_INFO_RAM \
|
|
|
|
#include <configs/ti_omap5_common.h>
|
|
|
|
/* Enhance our eMMC support / experience. */
|
|
#define CONFIG_RANDOM_UUID
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
/* CPSW Ethernet */
|
|
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
|
|
#define CONFIG_MII /* Required in net/eth.c */
|
|
#define CONFIG_PHY_GIGE /* per-board part of CPSW */
|
|
#define CONFIG_PHYLIB
|
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
|
|
|
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
|
|
|
/* USB xHCI HOST */
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
|
|
|
|
#define CONFIG_OMAP_USB_PHY
|
|
#define CONFIG_OMAP_USB3PHY1_HOST
|
|
|
|
/* SATA */
|
|
#define CONFIG_LIBATA
|
|
#define CONFIG_SCSI_AHCI
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
|
|
/*
|
|
* Default to using SPI for environment, etc.
|
|
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
|
|
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
|
|
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
|
|
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
|
|
* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
|
|
* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
|
|
* 0x9E0000 - 0x2000000 : USERLAND
|
|
*/
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
|
|
|
|
/* SPI SPL */
|
|
#define CONFIG_TI_EDMA3
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
|
|
|
|
/* SPI */
|
|
#undef CONFIG_OMAP3_SPI
|
|
#define CONFIG_TI_SPI_MMAP
|
|
#define CONFIG_SF_DEFAULT_SPEED 76800000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_QSPI_QUAD_SUPPORT
|
|
|
|
#endif /* __CONFIG_AM57XX_EVM_H */
|