mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
72f78c6918
As per Device Tree Specification [1], the status parameter of nodes can be "okay", "disabled", etc. "ok" is not a valid parameter. U-boot Driver Model does not recognize status="ok" either and treats the node as disabled. [1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3 Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com>
169 lines
3.9 KiB
Text
169 lines
3.9 KiB
Text
/*
|
|
* Device Tree Source for OMAP3 SoC
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/bus/ti-sysc.h>
|
|
#include <dt-bindings/media/omap3-isp.h>
|
|
|
|
#include "omap3.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial3 = &uart4;
|
|
};
|
|
|
|
cpus {
|
|
/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
|
|
cpu: cpu@0 {
|
|
operating-points = <
|
|
/* kHz uV */
|
|
300000 1012500
|
|
600000 1200000
|
|
800000 1325000
|
|
>;
|
|
clock-latency = <300000>; /* From legacy driver */
|
|
};
|
|
};
|
|
|
|
ocp@68000000 {
|
|
uart4: serial@49042000 {
|
|
compatible = "ti,omap3-uart";
|
|
reg = <0x49042000 0x400>;
|
|
interrupts = <80>;
|
|
dmas = <&sdma 81 &sdma 82>;
|
|
dma-names = "tx", "rx";
|
|
ti,hwmods = "uart4";
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
abb_mpu_iva: regulator-abb-mpu {
|
|
compatible = "ti,abb-v1";
|
|
regulator-name = "abb_mpu_iva";
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
reg = <0x483072f0 0x8>, <0x48306818 0x4>;
|
|
reg-names = "base-address", "int-address";
|
|
ti,tranxdone-status-mask = <0x4000000>;
|
|
clocks = <&sys_ck>;
|
|
ti,settling-time = <30>;
|
|
ti,clock-cycles = <8>;
|
|
ti,abb_info = <
|
|
/*uV ABB efuse rbb_m fbb_m vset_m*/
|
|
1012500 0 0 0 0 0
|
|
1200000 0 0 0 0 0
|
|
1325000 0 0 0 0 0
|
|
1375000 1 0 0 0 0
|
|
>;
|
|
};
|
|
|
|
omap3_pmx_core2: pinmux@480025a0 {
|
|
compatible = "ti,omap3-padconf", "pinctrl-single";
|
|
reg = <0x480025a0 0x5c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
pinctrl-single,register-width = <16>;
|
|
pinctrl-single,function-mask = <0xff1f>;
|
|
};
|
|
|
|
isp: isp@480bc000 {
|
|
compatible = "ti,omap3-isp";
|
|
reg = <0x480bc000 0x12fc
|
|
0x480bd800 0x0600>;
|
|
interrupts = <24>;
|
|
iommus = <&mmu_isp>;
|
|
syscon = <&scm_conf 0x2f0>;
|
|
ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
|
|
#clock-cells = <1>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
bandgap: bandgap@48002524 {
|
|
reg = <0x48002524 0x4>;
|
|
compatible = "ti,omap36xx-bandgap";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
target-module@480cb000 {
|
|
compatible = "ti,sysc-omap3630-sr", "ti,sysc";
|
|
ti,hwmods = "smartreflex_core";
|
|
reg = <0x480cb038 0x4>;
|
|
reg-names = "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
clocks = <&sr2_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x480cb000 0x001000>;
|
|
|
|
smartreflex_core: smartreflex@0 {
|
|
compatible = "ti,omap3-smartreflex-core";
|
|
reg = <0 0x400>;
|
|
interrupts = <19>;
|
|
};
|
|
};
|
|
|
|
target-module@480c9000 {
|
|
compatible = "ti,sysc-omap3630-sr", "ti,sysc";
|
|
ti,hwmods = "smartreflex_mpu_iva";
|
|
reg = <0x480c9038 0x4>;
|
|
reg-names = "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
clocks = <&sr1_fck>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x480c9000 0x001000>;
|
|
|
|
|
|
smartreflex_mpu_iva: smartreflex@480c9000 {
|
|
compatible = "ti,omap3-smartreflex-mpu-iva";
|
|
reg = <0 0x400>;
|
|
interrupts = <18>;
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal_zones: thermal-zones {
|
|
#include "omap3-cpu-thermal.dtsi"
|
|
};
|
|
};
|
|
|
|
/* OMAP3630 needs dss_96m_fck for VENC */
|
|
&venc {
|
|
clocks = <&dss_tv_fck>, <&dss_96m_fck>;
|
|
clock-names = "fck", "tv_dac_clk";
|
|
};
|
|
|
|
&ssi {
|
|
status = "okay";
|
|
|
|
clocks = <&ssi_ssr_fck>,
|
|
<&ssi_sst_fck>,
|
|
<&ssi_ick>;
|
|
clock-names = "ssi_ssr_fck",
|
|
"ssi_sst_fck",
|
|
"ssi_ick";
|
|
};
|
|
|
|
/include/ "omap34xx-omap36xx-clocks.dtsi"
|
|
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
|
|
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
|
|
/include/ "omap36xx-clocks.dtsi"
|