mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
4871650c95
Both the values and the MMIO addresses that we need during the 64-bit FEL restore are smaller than 2^32, so we don't need to do any 64-bit loads. Change the loads to only load 32 bits worth of data, that saves us some bytes for storing the values. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org>
81 lines
2.2 KiB
ArmAsm
81 lines
2.2 KiB
ArmAsm
/*
|
|
* Utility functions for FEL mode, when running SPL in AArch64.
|
|
*
|
|
* Copyright (c) 2017 Arm Ltd.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <asm/system.h>
|
|
#include <linux/linkage.h>
|
|
|
|
/*
|
|
* We don't overwrite save_boot_params() here, to save the FEL state upon
|
|
* entry, since this would run *after* the RMR reset, which clobbers that
|
|
* state.
|
|
* Instead we store the state _very_ early in the boot0 hook, *before*
|
|
* resetting to AArch64.
|
|
*/
|
|
|
|
/*
|
|
* The FEL routines in BROM run in AArch32.
|
|
* Reset back into 32-bit mode here and restore the saved FEL state
|
|
* afterwards.
|
|
* Resetting back into AArch32/EL3 using the RMR always enters the BROM,
|
|
* but we can use the CPU hotplug mechanism to branch back to our code
|
|
* immediately.
|
|
*/
|
|
ENTRY(return_to_fel)
|
|
/*
|
|
* the RMR reset will clear all registers, so save the arguments
|
|
* (LR and SP) in the fel_stash structure, which we read anyways later
|
|
*/
|
|
adr x2, fel_stash
|
|
str w0, [x2]
|
|
str w1, [x2, #4]
|
|
|
|
adr x1, fel_stash_addr // to find the fel_stash address in AA32
|
|
str w2, [x1]
|
|
|
|
ldr w0, =0xfa50392f // CPU hotplug magic
|
|
#ifdef CONFIG_MACH_SUN50I_H616
|
|
ldr w2, =(SUNXI_R_CPUCFG_BASE + 0x1c0)
|
|
str w0, [x2], #0x4
|
|
#elif CONFIG_MACH_SUN50I_H6
|
|
ldr w2, =(SUNXI_RTC_BASE + 0x1b8) // BOOT_CPU_HP_FLAG_REG
|
|
str w0, [x2], #0x4
|
|
#else
|
|
ldr w2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base
|
|
str w0, [x2, #0x8]
|
|
#endif
|
|
adr x0, back_in_32
|
|
str w0, [x2]
|
|
|
|
dsb sy
|
|
isb sy
|
|
mov x0, #2 // RMR reset into AArch32
|
|
dsb sy
|
|
msr RMR_EL3, x0
|
|
isb sy
|
|
1: wfi
|
|
b 1b
|
|
|
|
/* AArch32 code to restore the state from fel_stash and return back to FEL. */
|
|
back_in_32:
|
|
.word 0xe59f0028 // ldr r0, [pc, #40] ; load fel_stash address
|
|
.word 0xe5901008 // ldr r1, [r0, #8]
|
|
.word 0xe129f001 // msr CPSR_fc, r1
|
|
.word 0xf57ff06f // isb
|
|
.word 0xe590d000 // ldr sp, [r0]
|
|
.word 0xe590e004 // ldr lr, [r0, #4]
|
|
.word 0xe5901010 // ldr r1, [r0, #16]
|
|
.word 0xee0c1f10 // mcr 15, 0, r1, cr12, cr0, {0} ; VBAR
|
|
.word 0xe590100c // ldr r1, [r0, #12]
|
|
.word 0xee011f10 // mcr 15, 0, r1, cr1, cr0, {0} ; SCTLR
|
|
.word 0xf57ff06f // isb
|
|
.word 0xe12fff1e // bx lr ; return to FEL
|
|
fel_stash_addr:
|
|
.word 0x00000000 // receives fel_stash addr, by AA64 code above
|
|
ENDPROC(return_to_fel)
|