mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
236 lines
7.6 KiB
C
236 lines
7.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2007-2013 Tensilica, Inc.
|
|
* Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/core.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/config.h>
|
|
|
|
/*
|
|
* The 'xtfpga' board describes a set of very similar boards with only minimal
|
|
* differences.
|
|
*/
|
|
|
|
/*=====================*/
|
|
/* Board and Processor */
|
|
/*=====================*/
|
|
|
|
#define CONFIG_XTFPGA
|
|
|
|
/* FPGA CPU freq after init */
|
|
#define CONFIG_SYS_CLK_FREQ (gd->cpu_clk)
|
|
|
|
/*===================*/
|
|
/* RAM Layout */
|
|
/*===================*/
|
|
|
|
#if XCHAL_HAVE_PTP_MMU
|
|
#define CONFIG_SYS_MEMORY_BASE \
|
|
(XCHAL_VECBASE_RESET_VADDR - XCHAL_VECBASE_RESET_PADDR)
|
|
#define CONFIG_SYS_IO_BASE 0xf0000000
|
|
#else
|
|
#define CONFIG_SYS_MEMORY_BASE 0x60000000
|
|
#define CONFIG_SYS_IO_BASE 0x90000000
|
|
#define CONFIG_MAX_MEM_MAPPED 0x10000000
|
|
#endif
|
|
|
|
/* Onboard RAM sizes:
|
|
*
|
|
* LX60 0x04000000 64 MB
|
|
* LX110 0x03000000 48 MB
|
|
* LX200 0x06000000 96 MB
|
|
* ML605 0x18000000 384 MB
|
|
* KC705 0x38000000 896 MB
|
|
*
|
|
* noMMU configurations can only see first 256MB of onboard memory.
|
|
*/
|
|
|
|
#if XCHAL_HAVE_PTP_MMU || CONFIG_BOARD_SDRAM_SIZE < 0x10000000
|
|
#define CONFIG_SYS_SDRAM_SIZE CONFIG_BOARD_SDRAM_SIZE
|
|
#else
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE MEMADDR(0x00000000)
|
|
|
|
/* Lx60 can only map 128kb memory (instead of 256kb) when running under OCD */
|
|
#ifdef CONFIG_XTFPGA_LX60
|
|
# define CONFIG_SYS_MONITOR_LEN 0x00020000 /* 128KB */
|
|
#else
|
|
# define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
|
|
|
|
/* Linux boot param area in RAM (used only when booting linux) */
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN (64 << 10)
|
|
|
|
/* Memory test is destructive so default must not overlap vectors or U-Boot*/
|
|
#define CONFIG_SYS_MEMTEST_START MEMADDR(0x01000000)
|
|
#define CONFIG_SYS_MEMTEST_END MEMADDR(0x02000000)
|
|
|
|
/* Load address for stand-alone applications.
|
|
* MEMADDR cannot be used here, because the definition needs to be
|
|
* a plain number as it's used as -Ttext argument for ld in standalone
|
|
* example makefile.
|
|
* Handle noMMU vs MMUv2 vs MMUv3 distinction here manually.
|
|
*/
|
|
#if XCHAL_HAVE_PTP_MMU
|
|
#if XCHAL_VECBASE_RESET_VADDR == XCHAL_VECBASE_RESET_PADDR
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x00800000
|
|
#else
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0xd0800000
|
|
#endif
|
|
#else
|
|
#define CONFIG_STANDALONE_LOAD_ADDR 0x60800000
|
|
#endif
|
|
|
|
#if defined(CONFIG_MAX_MEM_MAPPED) && \
|
|
CONFIG_MAX_MEM_MAPPED < CONFIG_SYS_SDRAM_SIZE
|
|
#define CONFIG_SYS_MEMORY_SIZE CONFIG_MAX_MEM_MAPPED
|
|
#else
|
|
#define CONFIG_SYS_MEMORY_SIZE CONFIG_SYS_SDRAM_SIZE
|
|
#endif
|
|
|
|
#define XTENSA_SYS_TEXT_ADDR \
|
|
(MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN)
|
|
|
|
/* Used by tftpboot; env var 'loadaddr' */
|
|
#define CONFIG_SYS_LOAD_ADDR MEMADDR(0x02000000)
|
|
|
|
/*==============================*/
|
|
/* U-Boot general configuration */
|
|
/*==============================*/
|
|
|
|
#define CONFIG_BOARD_POSTCLK_INIT
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
/* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
/* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/*==============================*/
|
|
/* U-Boot autoboot configuration */
|
|
/*==============================*/
|
|
|
|
#define CONFIG_MX_CYCLIC
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
|
|
/*=========================================*/
|
|
/* FPGA Registers (board info and control) */
|
|
/*=========================================*/
|
|
|
|
/*
|
|
* These assume FPGA bitstreams from Tensilica release RB and up. Earlier
|
|
* releases may not provide any/all of these registers or at these offsets.
|
|
* Some of the FPGA registers are broken down into bitfields described by
|
|
* SHIFT left amount and field WIDTH (bits), and also by a bitMASK.
|
|
*/
|
|
|
|
/* Date of FPGA bitstream build in binary coded decimal (BCD) */
|
|
#define CONFIG_SYS_FPGAREG_DATE IOADDR(0x0D020000)
|
|
#define FPGAREG_MTH_SHIFT 24 /* BCD month 1..12 */
|
|
#define FPGAREG_MTH_WIDTH 8
|
|
#define FPGAREG_MTH_MASK 0xFF000000
|
|
#define FPGAREG_DAY_SHIFT 16 /* BCD day 1..31 */
|
|
#define FPGAREG_DAY_WIDTH 8
|
|
#define FPGAREG_DAY_MASK 0x00FF0000
|
|
#define FPGAREG_YEAR_SHIFT 0 /* BCD year 2001..9999*/
|
|
#define FPGAREG_YEAR_WIDTH 16
|
|
#define FPGAREG_YEAR_MASK 0x0000FFFF
|
|
|
|
/* FPGA core clock frequency in Hz (also input to UART) */
|
|
#define CONFIG_SYS_FPGAREG_FREQ IOADDR(0x0D020004) /* CPU clock frequency*/
|
|
|
|
/*
|
|
* DIP switch (left=sw1=lsb=bit0, right=sw8=msb=bit7; off=0, on=1):
|
|
* Bits 0..5 set the lower 6 bits of the default ethernet MAC.
|
|
* Bit 6 is reserved for future use by Tensilica.
|
|
* Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to
|
|
* the base of flash * (when on/1) or to the base of RAM (when off/0).
|
|
*/
|
|
#define CONFIG_SYS_FPGAREG_DIPSW IOADDR(0x0D02000C)
|
|
#define FPGAREG_MAC_SHIFT 0 /* Ethernet MAC bits 0..5 */
|
|
#define FPGAREG_MAC_WIDTH 6
|
|
#define FPGAREG_MAC_MASK 0x3f
|
|
#define FPGAREG_BOOT_SHIFT 7 /* Boot ROM addr mapping */
|
|
#define FPGAREG_BOOT_WIDTH 1
|
|
#define FPGAREG_BOOT_MASK 0x80
|
|
#define FPGAREG_BOOT_RAM 0
|
|
#define FPGAREG_BOOT_FLASH (1<<FPGAREG_BOOT_SHIFT)
|
|
|
|
/* Force hard reset of board by writing a code to this register */
|
|
#define CONFIG_SYS_FPGAREG_RESET IOADDR(0x0D020010) /* Reset board .. */
|
|
#define CONFIG_SYS_FPGAREG_RESET_CODE 0x0000DEAD /* by writing this code */
|
|
|
|
/*====================*/
|
|
/* Serial Driver Info */
|
|
/*====================*/
|
|
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_COM1 IOADDR(0x0D050020) /* Base address */
|
|
|
|
/* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
|
|
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*======================*/
|
|
/* Ethernet Driver Info */
|
|
/*======================*/
|
|
|
|
#define CONFIG_ETHBASE 00:50:C2:13:6f:00
|
|
#define CONFIG_SYS_ETHOC_BASE IOADDR(0x0d030000)
|
|
#define CONFIG_SYS_ETHOC_BUFFER_ADDR IOADDR(0x0D800000)
|
|
|
|
/*=====================*/
|
|
/* Flash & Environment */
|
|
/*=====================*/
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER /* use generic CFI driver */
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#ifdef CONFIG_XTFPGA_LX60
|
|
# define CONFIG_SYS_FLASH_SIZE 0x0040000 /* 4MB */
|
|
# define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */
|
|
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */
|
|
# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
|
|
# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#elif defined(CONFIG_XTFPGA_KC705)
|
|
# define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */
|
|
# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
|
|
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
|
|
# define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000)
|
|
# define CONFIG_SYS_MONITOR_BASE IOADDR(0x06000000)
|
|
#else
|
|
# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */
|
|
# define CONFIG_SYS_FLASH_SECT_SZ 0x20000 /* block size 128KB */
|
|
# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */
|
|
# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000)
|
|
# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#endif
|
|
#define CONFIG_SYS_MAX_FLASH_SECT \
|
|
(CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \
|
|
CONFIG_SYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ - 1)
|
|
#define CONFIG_SYS_FLASH_PROTECTION /* hw flash protection */
|
|
|
|
/*
|
|
* Put environment in top block (64kB)
|
|
* Another option would be to put env. in 2nd param block offs 8KB, size 8KB
|
|
*/
|
|
#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SIZE - CONFIG_SYS_FLASH_SECT_SZ)
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SZ
|
|
|
|
/* print 'E' for empty sector on flinfo */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
|
|
#endif /* __CONFIG_H */
|