mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
234 lines
6.7 KiB
C
234 lines
6.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc.
|
|
* Jason Liu <r64343@freescale.com>
|
|
*
|
|
* Configuration settings for Freescale MX53 low cost board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONSOLE_DEV "ttymxc0"
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
#define CONFIG_IMX_WATCHDOG
|
|
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 2
|
|
|
|
/* Eth Configs */
|
|
#define CONFIG_MII
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x1F
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_USB_EHCI_MX5
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_USB_ETHER_MCS7830
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
#define CONFIG_SYS_RTC_BUS_NUM 2
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x30
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
|
|
/* PMIC Controller */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_DIALOG_POWER
|
|
#define CONFIG_POWER_FSL
|
|
#define CONFIG_POWER_FSL_MC13892
|
|
#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
|
|
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* Command definition */
|
|
|
|
#define CONFIG_ETHPRIME "FEC0"
|
|
|
|
#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
|
|
|
|
#define PPD_CONFIG_NFS \
|
|
"nfsserver=192.168.252.95\0" \
|
|
"gatewayip=192.168.252.95\0" \
|
|
"netmask=255.255.255.0\0" \
|
|
"ipaddr=192.168.252.99\0" \
|
|
"kernsize=0x2000\0" \
|
|
"use_dhcp=0\0" \
|
|
"nfsroot=/opt/springdale/rd\0" \
|
|
"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
|
|
"${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \
|
|
"choose_ip=if test $use_dhcp = 1; then set kern_ipconf ip=dhcp; " \
|
|
"set getcmd dhcp; else set kern_ipconf " \
|
|
"ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \
|
|
"set getcmd tftp; fi\0" \
|
|
"nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
|
|
"${nfsserver}:${image}; bootm ${loadaddr}\0" \
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
PPD_CONFIG_NFS \
|
|
"bootlimit=10\0" \
|
|
"image=/boot/fitImage\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"dev=mmc\0" \
|
|
"devnum=0\0" \
|
|
"rootdev=mmcblk0p\0" \
|
|
"quiet=quiet loglevel=0\0" \
|
|
"console=" CONSOLE_DEV "\0" \
|
|
"lvds=ldb\0" \
|
|
"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
|
|
"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
|
|
"console=${console} ${rtc_status}\0" \
|
|
"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
|
|
"rootwait ${bootargs}\0" \
|
|
"doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
|
|
"then setenv quiet; fi\0" \
|
|
"hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
|
|
"/boot/bootcause/firstboot\0" \
|
|
"swappartitions=setexpr partnum 3 - ${partnum}\0" \
|
|
"failbootcmd=" \
|
|
"ppd_lcd_enable; " \
|
|
"msg=\"Monitor failed to start. " \
|
|
"Try again, or contact GE Service for support.\"; " \
|
|
"echo $msg; " \
|
|
"setenv stdout vga; " \
|
|
"echo \"\n\n\n\n \" $msg; " \
|
|
"setenv stdout serial; " \
|
|
"mw.b 0x7000A000 0xbc; " \
|
|
"mw.b 0x7000A001 0x00; " \
|
|
"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
|
|
"altbootcmd=" \
|
|
"run doquiet; " \
|
|
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
|
|
"run hasfirstboot || setenv partnum 0; " \
|
|
"if test ${partnum} != 0; then " \
|
|
"setenv bootcause REVERT; " \
|
|
"run swappartitions loadimage doboot; " \
|
|
"fi; " \
|
|
"run failbootcmd\0" \
|
|
"loadimage=" \
|
|
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
|
|
"doboot=" \
|
|
"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
|
|
"run setargs; " \
|
|
"run bootargs_emmc; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"tryboot=" \
|
|
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
|
|
"run loadimage || run swappartitions && run loadimage || " \
|
|
"setenv partnum 0 && echo MISSING IMAGE;" \
|
|
"run doboot; " \
|
|
"run failbootcmd\0" \
|
|
"video-mode=" \
|
|
"lcd:800x480-24@60,monitor=lcd\0" \
|
|
|
|
#define CONFIG_MMCBOOTCOMMAND \
|
|
"if mmc dev ${devnum}; then " \
|
|
"run doquiet; " \
|
|
"run tryboot; " \
|
|
"fi; " \
|
|
|
|
#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
#define CONFIG_SYS_MAXARGS 48 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x70010000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
|
|
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
|
|
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
|
|
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* FLASH and environment organization */
|
|
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
|
|
#define CONFIG_ENV_SIZE (10 * 1024)
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#define CONFIG_CMD_FUSE
|
|
#define CONFIG_FSL_IIM
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* I2C1 */
|
|
#define CONFIG_SYS_NUM_I2C_BUSES 9
|
|
#define CONFIG_SYS_I2C_MAX_HOPS 1
|
|
#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
|
|
}
|
|
|
|
#define CONFIG_BCH
|
|
|
|
/* Backlight Control */
|
|
#define CONFIG_PWM_IMX
|
|
#define CONFIG_IMX6_PWM_PER_CLK 66666000
|
|
|
|
/* Framebuffer and LCD */
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_IPUV3
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|