u-boot/drivers/mtd/nand/raw
Stefan Roese c680df7e84 mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig
Convert CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig, update defconfigs,
headers and whitelist.

Please note that this symbol already was used in Kconfig
(imply in CONFIG_NAND_ATMEL) which did not work, since this symbol was
not available in Kconfig. This changes now with this patch and all
boards with CONFIG_NAND_ATMEL will have BBT enabled. Which is what
I also need on my GARDENA AT91SAM based board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
[trini: Rework such that the configs are unchanged to start with]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25 20:58:37 -04:00
..
brcmnand drivers: nand: brcmnand: add an option to read the write-protect from device tree 2019-04-22 11:55:58 -04:00
am335x_spl_bch.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
arasan_nfc.c mtd: nand: arasan_nfc: Add support for nand multi chip select 2019-01-24 10:03:42 +01:00
atmel_nand.c nand: atmel: Initialize pmecc smu with correct size 2018-10-22 09:18:49 -04:00
atmel_nand_ecc.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
davinci_nand.c nand: davinci: avoid out of bounds array access 2019-07-31 13:08:07 -04:00
denali.c mtd: rawnand: denali: fix a race condition when DMA is kicked 2018-12-29 11:38:37 +09:00
denali.h mtd: rawnand: denali: add reset handling 2019-04-17 22:20:16 +02:00
denali_dt.c mtd: rawnand: denali: add reset handling 2019-04-17 22:20:16 +02:00
denali_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_elbc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_elbc_spl.c mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig 2019-05-21 07:52:33 +02:00
fsl_ifc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_ifc_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsl_upm.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
fsmc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
kb9202_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
Kconfig mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig 2019-08-25 20:58:37 -04:00
kirkwood_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
kmeter1_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
lpc32xx_nand_mlc.c mtd: nand: lpc32xx mlc: predefine number of NAND chips to support 2018-11-16 13:34:36 -05:00
lpc32xx_nand_slc.c mtd: nand: lpc32xx slc: disable DMA support in SPL builds 2018-11-16 13:34:37 -05:00
Makefile drivers: nand: brcmnand: add initial support 2019-04-22 11:55:58 -04:00
mxc_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxc_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxc_nand_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
mxs_nand.c i.MX6: nand: add nandbcb command for imx 2019-07-19 14:51:25 +02:00
mxs_nand_dt.c i.MX6: nand: add nandbcb command for imx 2019-07-19 14:51:25 +02:00
mxs_nand_spl.c i.MX6: nand: add nandbcb command for imx 2019-07-19 14:51:25 +02:00
nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_base.c mtd: nand: raw: Fix CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT behavior 2019-04-26 18:58:20 -04:00
nand_bbt.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_bch.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_ecc.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_ids.c mtd: nand: raw: Add Hynix H27UBG8T2BTR id table 2019-01-02 00:58:16 +05:30
nand_plat.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_load.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_loaders.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_spl_simple.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_timings.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
nand_util.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
omap_elm.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
omap_gpmc.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
pxa3xx_nand.c mtd: rawnand: pxa3xx: fix 2kiB pages with 8b strength chips layout 2018-11-22 11:38:13 +05:30
pxa3xx_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
stm32_fmc2_nand.c mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 option 2019-07-12 11:50:57 +02:00
sunxi_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
sunxi_nand_spl.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
tegra_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
tegra_nand.h mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30
vf610_nfc.c nand: vybrid: Extend the vf610 NFC NAND driver to support device tree (and DM) 2019-01-01 14:12:18 +01:00
zynq_nand.c mtd: move NAND files into a raw/ subdirectory 2018-09-20 20:10:49 +05:30