mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
feff3e6c38
Add a man-page for the cp command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
83 lines
1.8 KiB
ReStructuredText
83 lines
1.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+:
|
|
|
|
cp command
|
|
==========
|
|
|
|
Synopsis
|
|
--------
|
|
|
|
::
|
|
|
|
cp source target count
|
|
cp.b source target count
|
|
cp.w source target count
|
|
cp.l source target count
|
|
cp.q source target count
|
|
|
|
Description
|
|
-----------
|
|
|
|
The cp command is used to copy *count* chunks of memory from the *source*
|
|
address to the *target* address. If the *target* address points to NOR flash,
|
|
the flash is programmed.
|
|
|
|
The number bytes in one chunk is defined by the suffix defaulting to 4 bytes:
|
|
|
|
====== ==========
|
|
suffix chunk size
|
|
====== ==========
|
|
.b 1 byte
|
|
.w 2 bytes
|
|
.l 4 bytes
|
|
.q 8 bytes
|
|
<none> 4 bytes
|
|
====== ==========
|
|
|
|
source
|
|
source address, hexadecimal
|
|
|
|
target
|
|
target address, hexadecimal
|
|
|
|
count
|
|
number of words to be copied, hexadecimal
|
|
|
|
Examples
|
|
--------
|
|
|
|
The example device has a NOR flash where the lower part of the flash is
|
|
protected. We first copy to RAM, then to unprotected flash. Last we try to
|
|
write to protectd flash.
|
|
|
|
::
|
|
|
|
=> mtd list
|
|
List of MTD devices:
|
|
* nor0
|
|
- device: flash@0
|
|
- parent: root_driver
|
|
- driver: cfi_flash
|
|
- path: /flash@0
|
|
- type: NOR flash
|
|
- block size: 0x20000 bytes
|
|
- min I/O: 0x1 bytes
|
|
- 0x000000000000-0x000002000000 : "nor0"
|
|
=> cp.b 4020000 5000000 200000
|
|
=> cp.b 4020000 1e00000 20000
|
|
Copy to Flash... done
|
|
=> cp.b 4020000 0 20000
|
|
Copy to Flash... Can't write to protected Flash sectors
|
|
=>
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
The cp command is available if CONFIG_CMD_MEMORY=y. Support for 64 bit words
|
|
(cp.q) depends on CONFIG_MEM_SUPPORT_64BIT_DATA=y. Copying to flash depends on
|
|
CONFIG_MTD_NOR_FLASH=y.
|
|
|
|
Return value
|
|
------------
|
|
|
|
The return value $? is set to 0 (true) if the command was successfully,
|
|
1 (false) otherwise.
|