mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
08df746dd1
Add link to the actual platform for folks to find details about the board in addition to the SoC's TRM. Signed-off-by: Nishanth Menon <nm@ti.com>
248 lines
6 KiB
ReStructuredText
248 lines
6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
.. sectionauthor:: Vignesh Raghavendra <vigneshr@ti.com>
|
|
|
|
AM62 Platforms
|
|
===============
|
|
|
|
Introduction:
|
|
-------------
|
|
The AM62 SoC family is the follow on AM335x built on the K3 Multicore
|
|
SoC architecture platform, providing ultra-low-power modes, dual
|
|
display, multi-sensor edge compute, security and other BOM-saving
|
|
integrations. The AM62 SoC targets a broad market to enable
|
|
applications such as Industrial HMI, PLC/CNC/Robot control, Medical
|
|
Equipment, Building Automation, Appliances and more.
|
|
|
|
Some highlights of this SoC are:
|
|
|
|
* Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster.
|
|
Pin-to-pin compatible options for single and quad core are available.
|
|
* Cortex-M4F for general-purpose or safety usage.
|
|
* Dual display support, providing 24-bit RBG parallel interface and
|
|
OLDI/LVDS-4 Lane x2, up to 200MHz pixel clock support for 2K display
|
|
resolution.
|
|
* Selectable GPU support, up to 8GFLOPS, providing better user experience
|
|
in 3D graphic display case and Android.
|
|
* PRU(Programmable Realtime Unit) support for customized programmable
|
|
interfaces/IOs.
|
|
* Integrated Giga-bit Ethernet switch supporting up to a total of two
|
|
external ports (TSN capable).
|
|
* 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for
|
|
NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio,
|
|
1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals.
|
|
* Dedicated Centralized System Controller for Security, Power, and
|
|
Resource Management.
|
|
* Multiple low power modes support, ex: Deep sleep, Standby, MCU-only,
|
|
enabling battery powered system design.
|
|
|
|
More details can be found in the Technical Reference Manual:
|
|
https://www.ti.com/lit/pdf/spruiv7
|
|
|
|
Platform information:
|
|
|
|
* https://www.ti.com/tool/SK-AM62B
|
|
|
|
Boot Flow:
|
|
----------
|
|
Below is the pictorial representation of boot flow:
|
|
|
|
.. image:: img/boot_diagram_k3_current.svg
|
|
|
|
- Here TIFS acts as master and provides all the critical services. R5/A53
|
|
requests TIFS to get these services done as shown in the above diagram.
|
|
|
|
Sources:
|
|
--------
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_boot_sources
|
|
:end-before: .. k3_rst_include_end_boot_sources
|
|
|
|
Build procedure:
|
|
----------------
|
|
0. Setup the environment variables:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_common_env_vars_desc
|
|
:end-before: .. k3_rst_include_end_common_env_vars_desc
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_board_env_vars_desc
|
|
:end-before: .. k3_rst_include_end_board_env_vars_desc
|
|
|
|
Set the variables corresponding to this platform:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_common_env_vars_defn
|
|
:end-before: .. k3_rst_include_end_common_env_vars_defn
|
|
.. code-block:: bash
|
|
|
|
$ export UBOOT_CFG_CORTEXR=am62x_evm_r5_defconfig
|
|
$ export UBOOT_CFG_CORTEXA=am62x_evm_a53_defconfig
|
|
$ export TFA_BOARD=lite
|
|
$ # we dont use any extra TFA parameters
|
|
$ unset TFA_EXTRA_ARGS
|
|
$ export OPTEE_PLATFORM=k3-am62x
|
|
$ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
|
|
|
|
.. am62x_evm_rst_include_start_build_steps
|
|
|
|
1. Trusted Firmware-A:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_tfa
|
|
:end-before: .. k3_rst_include_end_build_steps_tfa
|
|
|
|
|
|
2. OP-TEE:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_optee
|
|
:end-before: .. k3_rst_include_end_build_steps_optee
|
|
|
|
3. U-Boot:
|
|
|
|
* 4.1 R5:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_spl_r5
|
|
:end-before: .. k3_rst_include_end_build_steps_spl_r5
|
|
|
|
* 4.2 A53:
|
|
|
|
.. include:: k3.rst
|
|
:start-after: .. k3_rst_include_start_build_steps_uboot
|
|
:end-before: .. k3_rst_include_end_build_steps_uboot
|
|
.. am62x_evm_rst_include_end_build_steps
|
|
|
|
Target Images
|
|
--------------
|
|
In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC
|
|
variant (GP, HS-FS, HS-SE) requires a different source for these files.
|
|
|
|
- GP
|
|
|
|
* tiboot3-am62x-gp-evm.bin from step 3.1
|
|
* tispl.bin_unsigned, u-boot.img_unsigned from step 3.2
|
|
|
|
- HS-FS
|
|
|
|
* tiboot3-am62x-hs-fs-evm.bin from step 3.1
|
|
* tispl.bin, u-boot.img from step 3.2
|
|
|
|
- HS-SE
|
|
|
|
* tiboot3-am62x-hs-evm.bin from step 3.1
|
|
* tispl.bin, u-boot.img from step 3.2
|
|
|
|
Image formats:
|
|
--------------
|
|
|
|
- tiboot3.bin
|
|
|
|
.. image:: img/multi_cert_tiboot3.bin.svg
|
|
|
|
- tispl.bin
|
|
|
|
.. image:: img/dm_tispl.bin.svg
|
|
|
|
A53 SPL DDR Memory Layout
|
|
-------------------------
|
|
|
|
.. am62x_evm_rst_include_start_ddr_mem_layout
|
|
|
|
This provides an overview memory usage in A53 SPL stage.
|
|
|
|
.. list-table::
|
|
:widths: 16 16 16
|
|
:header-rows: 1
|
|
|
|
* - Region
|
|
- Start Address
|
|
- End Address
|
|
|
|
* - EMPTY
|
|
- 0x80000000
|
|
- 0x80080000
|
|
|
|
* - TEXT BASE
|
|
- 0x80080000
|
|
- 0x800d8000
|
|
|
|
* - EMPTY
|
|
- 0x800d8000
|
|
- 0x80200000
|
|
|
|
* - BMP IMAGE
|
|
- 0x80200000
|
|
- 0x80b77660
|
|
|
|
* - STACK
|
|
- 0x80b77660
|
|
- 0x80b77e60
|
|
|
|
* - GD
|
|
- 0x80b77e60
|
|
- 0x80b78000
|
|
|
|
* - MALLOC
|
|
- 0x80b78000
|
|
- 0x80b80000
|
|
|
|
* - EMPTY
|
|
- 0x80b80000
|
|
- 0x80c80000
|
|
|
|
* - BSS
|
|
- 0x80c80000
|
|
- 0x80d00000
|
|
|
|
* - BLOBS
|
|
- 0x80d00000
|
|
- 0x80d00400
|
|
|
|
* - EMPTY
|
|
- 0x80d00400
|
|
- 0x81000000
|
|
.. am62x_evm_rst_include_end_ddr_mem_layout
|
|
|
|
Switch Setting for Boot Mode
|
|
----------------------------
|
|
|
|
Boot Mode pins provide means to select the boot mode and options before the
|
|
device is powered up. After every POR, they are the main source to populate
|
|
the Boot Parameter Tables.
|
|
|
|
The following table shows some common boot modes used on AM62 platform. More
|
|
details can be found in the Technical Reference Manual:
|
|
https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
|
|
|
|
.. list-table:: Boot Modes
|
|
:widths: 16 16 16
|
|
:header-rows: 1
|
|
|
|
* - Switch Label
|
|
- SW2: 12345678
|
|
- SW3: 12345678
|
|
|
|
* - SD
|
|
- 01000000
|
|
- 11000010
|
|
|
|
* - OSPI
|
|
- 00000000
|
|
- 11001110
|
|
|
|
* - EMMC
|
|
- 00000000
|
|
- 11010010
|
|
|
|
* - UART
|
|
- 00000000
|
|
- 11011100
|
|
|
|
* - USB DFU
|
|
- 00000000
|
|
- 11001010
|
|
|
|
For SW2 and SW1, the switch state in the "ON" position = 1.
|