mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
9b768bf0e3
If cs gpio is requested with ACTIVE_HIGH flag, it will be pulled low(i.e. active). This is not what we expected. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
230 lines
4.9 KiB
C
230 lines
4.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2021 Nuvoton Technology.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <spi.h>
|
|
#include <clk.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#define MAX_DIV 127
|
|
|
|
/* Register offsets */
|
|
#define PSPI_DATA 0
|
|
#define PSPI_CTL1 2
|
|
#define PSPI_STAT 4
|
|
|
|
/* PSPI_CTL1 fields */
|
|
#define PSPI_CTL1_SPIEN BIT(0)
|
|
#define PSPI_CTL1_SCM BIT(7)
|
|
#define PSPI_CTL1_SCIDL BIT(8)
|
|
#define PSPI_CTL1_SCDV_MASK GENMASK(15, 9)
|
|
#define PSPI_CTL1_SCDV_SHIFT 9
|
|
|
|
/* PSPI_STAT fields */
|
|
#define PSPI_STAT_BSY BIT(0)
|
|
#define PSPI_STAT_RBF BIT(1)
|
|
|
|
struct npcm_pspi_priv {
|
|
void __iomem *base;
|
|
struct clk clk;
|
|
struct gpio_desc cs_gpio;
|
|
u32 max_hz;
|
|
};
|
|
|
|
static inline void spi_cs_activate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
|
|
dm_gpio_set_value(&priv->cs_gpio, 1);
|
|
}
|
|
|
|
static inline void spi_cs_deactivate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
|
|
dm_gpio_set_value(&priv->cs_gpio, 0);
|
|
}
|
|
|
|
static inline void npcm_pspi_enable(struct npcm_pspi_priv *priv)
|
|
{
|
|
u16 val;
|
|
|
|
val = readw(priv->base + PSPI_CTL1);
|
|
val |= PSPI_CTL1_SPIEN;
|
|
writew(val, priv->base + PSPI_CTL1);
|
|
}
|
|
|
|
static inline void npcm_pspi_disable(struct npcm_pspi_priv *priv)
|
|
{
|
|
u16 val;
|
|
|
|
val = readw(priv->base + PSPI_CTL1);
|
|
val &= ~PSPI_CTL1_SPIEN;
|
|
writew(val, priv->base + PSPI_CTL1);
|
|
}
|
|
|
|
static int npcm_pspi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
void __iomem *base = priv->base;
|
|
const u8 *tx = dout;
|
|
u8 *rx = din;
|
|
u32 bytes = bitlen / 8;
|
|
u8 tmp;
|
|
u32 val;
|
|
int i, ret = 0;
|
|
|
|
npcm_pspi_enable(priv);
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev);
|
|
|
|
for (i = 0; i < bytes; i++) {
|
|
/* Making sure we can write */
|
|
ret = readb_poll_timeout(base + PSPI_STAT, val,
|
|
!(val & PSPI_STAT_BSY),
|
|
1000000);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
if (tx)
|
|
writeb(*tx++, base + PSPI_DATA);
|
|
else
|
|
writeb(0, base + PSPI_DATA);
|
|
|
|
/* Wait till write completed */
|
|
ret = readb_poll_timeout(base + PSPI_STAT, val,
|
|
!(val & PSPI_STAT_BSY),
|
|
1000000);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
/* Wait till read buffer full */
|
|
ret = readb_poll_timeout(base + PSPI_STAT, val,
|
|
(val & PSPI_STAT_RBF),
|
|
1000000);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
tmp = readb(base + PSPI_DATA);
|
|
if (rx)
|
|
*rx++ = tmp;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev);
|
|
|
|
debug("npcm_pspi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n",
|
|
dev->parent->name, dev->name, *(uint *)tx, *(uint *)rx, bitlen);
|
|
|
|
npcm_pspi_disable(priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int npcm_pspi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
ulong apb_clock;
|
|
u32 divisor;
|
|
u16 val;
|
|
|
|
apb_clock = clk_get_rate(&priv->clk);
|
|
if (!apb_clock)
|
|
return -EINVAL;
|
|
|
|
if (speed > priv->max_hz)
|
|
speed = priv->max_hz;
|
|
|
|
divisor = DIV_ROUND_CLOSEST(apb_clock, (2 * speed) - 1);
|
|
if (divisor > MAX_DIV)
|
|
divisor = MAX_DIV;
|
|
|
|
val = readw(priv->base + PSPI_CTL1);
|
|
val &= ~PSPI_CTL1_SCDV_MASK;
|
|
val |= divisor << PSPI_CTL1_SCDV_SHIFT;
|
|
writew(val, priv->base + PSPI_CTL1);
|
|
|
|
debug("%s: apb_clock=%lu speed=%d divisor=%u\n",
|
|
__func__, apb_clock, speed, divisor);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_pspi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
u16 pspi_mode, val;
|
|
|
|
switch (mode & (SPI_CPOL | SPI_CPHA)) {
|
|
case SPI_MODE_0:
|
|
pspi_mode = 0;
|
|
break;
|
|
case SPI_MODE_1:
|
|
pspi_mode = PSPI_CTL1_SCM;
|
|
break;
|
|
case SPI_MODE_2:
|
|
pspi_mode = PSPI_CTL1_SCIDL;
|
|
break;
|
|
case SPI_MODE_3:
|
|
pspi_mode = PSPI_CTL1_SCIDL | PSPI_CTL1_SCM;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
val = readw(priv->base + PSPI_CTL1);
|
|
val &= ~(PSPI_CTL1_SCIDL | PSPI_CTL1_SCM);
|
|
val |= pspi_mode;
|
|
writew(val, priv->base + PSPI_CTL1);
|
|
|
|
debug("%s: mode=%u\n", __func__, mode);
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_pspi_probe(struct udevice *bus)
|
|
{
|
|
struct npcm_pspi_priv *priv = dev_get_priv(bus);
|
|
int node = dev_of_offset(bus);
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
priv->base = dev_read_addr_ptr(bus);
|
|
priv->max_hz = dev_read_u32_default(bus, "spi-max-frequency", 1000000);
|
|
gpio_request_by_name_nodev(offset_to_ofnode(node), "cs-gpios", 0,
|
|
&priv->cs_gpio, GPIOD_IS_OUT| GPIOD_ACTIVE_LOW);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops npcm_pspi_ops = {
|
|
.xfer = npcm_pspi_xfer,
|
|
.set_speed = npcm_pspi_set_speed,
|
|
.set_mode = npcm_pspi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id npcm_pspi_ids[] = {
|
|
{ .compatible = "nuvoton,npcm845-pspi"},
|
|
{ .compatible = "nuvoton,npcm750-pspi"},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(npcm_pspi) = {
|
|
.name = "npcm_pspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = npcm_pspi_ids,
|
|
.ops = &npcm_pspi_ops,
|
|
.priv_auto = sizeof(struct npcm_pspi_priv),
|
|
.probe = npcm_pspi_probe,
|
|
};
|