u-boot/arch/arm/dts/zynq-cse-qspi.dtsi
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

125 lines
2.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Xilinx CSE QSPI board DTS
*
* Copyright (C) 2015 - 2017 Xilinx, Inc.
*/
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Zynq CSE QSPI Board";
compatible = "xlnx,zynq-cse-qspi", "xlnx,zynq-7000";
aliases {
spi0 = &qspi;
serial0 = &dcc;
};
memory@fffc0000 {
device_type = "memory";
reg = <0xFFFC0000 0x40000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
dcc: dcc {
compatible = "arm,dcc";
status = "disabled";
u-boot,dm-pre-reloc;
};
amba: amba {
u-boot,dm-pre-reloc;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
ranges;
intc: interrupt-controller@f8f01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xF8F01000 0x1000>,
<0xF8F00100 0x100>;
};
qspi: spi@e000d000 {
clock-names = "ref_clk", "pclk";
clocks = <&clkc 10>, <&clkc 43>;
compatible = "xlnx,zynq-qspi-1.0";
status = "okay";
interrupt-parent = <&intc>;
interrupts = <0 19 4>;
reg = <0xe000d000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
num-cs = <1>;
flash@0 {
compatible = "n25q128a11";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@qspi-fsbl-uboot {
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
partition@qspi-linux {
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
partition@qspi-device-tree {
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
partition@qspi-rootfs {
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
partition@qspi-bitstream {
label = "qspi-bitstream";
reg = <0xC00000 0x400000>;
};
};
};
slcr: slcr@f8000000 {
u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
fclk-enable = <0xf>;
u-boot,dm-pre-reloc;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
reg = <0x100 0x100>;
};
};
};
};
&dcc {
status = "okay";
};