u-boot/arch/arm/dts/stm32mp157c-ev1.dts
Patrick Delaunay 5f16f655cc stm32mp1: add support for stm32mp157c-ev1 board
Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1
(ev1 = mother board + daughter ed1) with device tree.
EV1 is the selected board by default in basic defconfig.

PS: CONFIG_PINCTRL_FULL activation avoid to increase
    SYS_MALLOC_F_LEN (Early malloc usage: 2034)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20 15:55:05 -04:00

101 lines
1.8 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
/dts-v1/;
#include "stm32mp157c-ed1.dts"
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
};
&cec {
pinctrl-names = "default";
pinctrl-0 = <&cec_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
};
&i2c5 {
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: mx66l51235l@0 {
reg = <0>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
#address-cells = <1>;
#size-cells = <1>;
};
flash1: mx66l51235l@1 {
reg = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
#address-cells = <1>;
#size-cells = <1>;
};
};
&timers2 {
status = "disabled";
pwm {
pinctrl-0 = <&pwm2_pins_a>;
pinctrl-names = "default";
status = "okay";
};
timer@1 {
status = "okay";
};
};
&timers8 {
status = "disabled";
pwm {
pinctrl-0 = <&pwm8_pins_a>;
pinctrl-names = "default";
status = "okay";
};
timer@7 {
status = "okay";
};
};
&timers12 {
status = "disabled";
pwm {
pinctrl-0 = <&pwm12_pins_a>;
pinctrl-names = "default";
status = "okay";
};
timer@11 {
status = "okay";
};
};
&usbphyc {
status = "okay";
};