u-boot/arch/arm/dts/keystone-k2g-ice.dts
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

83 lines
1.5 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree Source for K2G Industrial Communication Engine EVM
*
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "keystone-k2g.dtsi"
/ {
compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
model = "Texas Instruments K2G Industrial Communication EVM";
chosen {
stdout-path = &uart0;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
&mmc1 {
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&qspi {
status = "okay";
flash0: m25p80@0 {
compatible = "s25fl256s1", "spi-flash";
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <96000000>;
#address-cells = <1>;
#size-cells = <1>;
cdns,read-delay = <5>;
cdns,tshsl-ns = <500>;
cdns,tsd2d-ns = <500>;
cdns,tchsh-ns = <119>;
cdns,tslch-ns = <119>;
partition@0 {
label = "QSPI.u-boot";
reg = <0x00000000 0x00100000>;
};
partition@1 {
label = "QSPI.u-boot-env";
reg = <0x00100000 0x00040000>;
};
partition@2 {
label = "QSPI.skern";
reg = <0x00140000 0x0040000>;
};
partition@3 {
label = "QSPI.pmmc-firmware";
reg = <0x00180000 0x0040000>;
};
partition@4 {
label = "QSPI.kernel";
reg = <0x001c0000 0x0800000>;
};
partition@5 {
label = "QSPI.u-boot-spl-os";
reg = <0x009c0000 0x0040000>;
};
partition@6 {
label = "QSPI.file-system";
reg = <0x00a00000 0x1600000>;
};
};
};