u-boot/arch/arm/mach-at91/Kconfig
Tom Rini 8457d023b8 global: Remove extraneous DM_ETH imply/select
We only need to enable DM_ETH if we have a networking driver. All
networking drivers depend on DM_ETH being enabled, and their selection
ensures DM_ETH will be enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07 16:04:16 -05:00

366 lines
7.6 KiB
Text

if ARCH_AT91
config AT91FAMILY
def_bool y
config AT91SAM9260
bool
select CPU_ARM926EJS
config AT91SAM9G20
bool
select CPU_ARM926EJS
config AT91SAM9XE
bool
select CPU_ARM926EJS
config AT91SAM9261
bool
select CPU_ARM926EJS
config AT91SAM9263
bool
select CPU_ARM926EJS
config AT91SAM9G45
bool
select CPU_ARM926EJS
config AT91SAM9M10G45
bool
select CPU_ARM926EJS
config AT91SAM9N12
bool
select CPU_ARM926EJS
config AT91SAM9RL
bool
select CPU_ARM926EJS
config AT91SAM9X5
bool
select CPU_ARM926EJS
config SAM9X60
bool
select CPU_ARM926EJS
config SAMA7G5
bool
select CPU_V7A
select AT91RESET_EXTRST
config SAMA5D2
bool
select CPU_V7A
select ATMEL_SFR
config SAMA5D3
bool
select CPU_V7A
config SAMA5D4
bool
select CPU_V7A
select ATMEL_SFR
choice
prompt "Atmel AT91 board select"
optional
config TARGET_AT91SAM9260EK
bool "Atmel at91sam9260 reference board"
select AT91SAM9260
select BOARD_EARLY_INIT_F
config TARGET_ETHERNUT5
bool "Ethernut5 board"
select AT91SAM9XE
config TARGET_GURNARD
bool "Support gurnard"
select AT91SAM9G45
select AT91_WANTS_COMMON_PHY
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_SERIAL
select DM_SPI
select SPI
imply CMD_DM
config TARGET_AT91SAM9261EK
bool "Atmel at91sam9261 reference board"
select AT91SAM9261
select BOARD_EARLY_INIT_F
config TARGET_PM9261
bool "Ronetix pm9261 board"
select AT91SAM9261
config TARGET_AT91SAM9263EK
bool "Atmel at91sam9263 reference board"
select AT91SAM9263
select BOARD_EARLY_INIT_F
config TARGET_USB_A9263
bool "Caloa USB A9260 board"
select AT91SAM9263
select AT91_WANTS_COMMON_PHY
config TARGET_PM9263
bool "Ronetix pm9263 board"
select AT91SAM9263
config TARGET_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK board"
select AT91SAM9M10G45
select BOARD_EARLY_INIT_F
select SUPPORT_SPL
config TARGET_PM9G45
bool "Ronetix pm9g45 board"
select AT91SAM9G45
config TARGET_AT91SAM9N12EK
bool "Atmel AT91SAM9N12-EK board"
select AT91SAM9N12
select BOARD_EARLY_INIT_F
select SUPPORT_SPL
config TARGET_AT91SAM9RLEK
bool "Atmel at91sam9rl reference board"
select AT91SAM9RL
select BOARD_EARLY_INIT_F
config TARGET_AT91SAM9X5EK
bool "Atmel AT91SAM9X5-EK board"
select AT91SAM9X5
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_GARDENA_SMART_GATEWAY_AT91SAM
bool "GARDENA smart Gateway (AT91SAM)"
select AT91SAM9X5
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
config TARGET_SAM9X60EK
bool "SAM9X60-EK board"
select SAM9X60
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
config TARGET_SAM9X60_CURIOSITY
bool "SAM9X60 CURIOSITY board"
select SAM9X60
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
config TARGET_SAMA5D2_PTC_EK
bool "SAMA5D2 PTC EK board"
select BOARD_EARLY_INIT_F
select SAMA5D2
select BOARD_LATE_INIT
config TARGET_SAMA5D2_XPLAINED
bool "SAMA5D2 Xplained board"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SAMA5D2
select SUPPORT_SPL
config TARGET_SAMA5D27_SOM1_EK
bool "SAMA5D27 SOM1 EK board"
select SAMA5D2
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select SUPPORT_SPL
select ATMEL_SFR
help
The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package),
a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
24AA02E48. The SAMA5D2 SiP integrates the ARM Cortex-A5
processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM
in a single package.
config TARGET_SAMA5D27_WLSOM1_EK
bool "SAMA5D27 WLSOM1 EK board"
select SAMA5D2
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select CPU_V7A
select SUPPORT_SPL
help
The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package),
a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless
module providing bluetooth and wifi is also embedded.
The SAMA5D2 SiP integrates the ARM Cortex-A5
processor-based SAMA5D2 MPU with 2 Gbit LPDDR2-SDRAM
in a single package.
config TARGET_SAMA5D2_ICP
bool "SAMA5D2 Industrial Connectivity Platform (ICP)"
select SAMA5D2
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
help
The SAMA5D2 ICP embeds SAMA5D27 rev. C SoC, together with
a 64Mbit QSPI flash, 3xMikrobus connectors, 4xUSB ,
EtherCat and WILC3000 devices on board.
config TARGET_SAMA5D3_XPLAINED
bool "SAMA5D3 Xplained board"
select BOARD_EARLY_INIT_F
select SAMA5D3
select SUPPORT_SPL
select BOARD_LATE_INIT
config TARGET_SAMA5D3XEK
bool "SAMA5D3X-EK board"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SAMA5D3
select SUPPORT_SPL
config TARGET_SAMA5D4_XPLAINED
bool "SAMA5D4 Xplained board"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SAMA5D4
select SUPPORT_SPL
config TARGET_SAMA5D4EK
bool "SAMA5D4 Evaluation Kit"
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SAMA5D4
select SUPPORT_SPL
config TARGET_MEESC
bool "Support meesc"
select AT91SAM9263
config TARGET_CORVUS
bool "Support corvus"
select AT91SAM9M10G45
select AT91_WANTS_COMMON_PHY
select DM
select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_SAMA7G5EK
bool "SAMA7G5 EK board"
select SAMA7G5
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
config TARGET_TAURUS
bool "Support taurus"
select AT91SAM9G20
select AT91_WANTS_COMMON_PHY
select DM
select DM_GPIO
select DM_SERIAL
select DM_SPI
select SPI
select SUPPORT_SPL
imply CMD_DM
config TARGET_SMARTWEB
bool "Support smartweb"
select AT91SAM9260
select AT91_WANTS_COMMON_PHY
select DM
select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
config TARGET_VINCO
bool "Support VINCO"
select DM
select DM_SPI
select SAMA5D4
select SPI
select SUPPORT_SPL
imply CMD_DM
endchoice
config ATMEL_SFR
bool
config AT91RESET_EXTRST
bool
config SYS_SOC
default "at91"
config AT91_EFLASH
bool "Support AT91 flash driver"
depends on AT91SAM9XE
select USE_SYS_MAX_FLASH_BANKS
help
Enable the driver for the embedded flash used in the Atmel
AT91SAM9XE devices.
config EFLASH_PROTSECTORS
int "Number of flash sectors to protect from erasing"
depends on AT91_EFLASH
help
If non-zero, this will be the number of sectors of the flash to disallow
U-Boot to ease, starting from the beginning of flash.
config AT91_GPIO_PULLUP
bool "Keep pullups on peripheral pins"
depends on CPU_ARM926EJS
config ATMEL_LEGACY
bool "Legacy GPIO support"
config AT91_WANTS_COMMON_PHY
bool
source "board/atmel/at91sam9260ek/Kconfig"
source "board/atmel/at91sam9261ek/Kconfig"
source "board/atmel/at91sam9263ek/Kconfig"
source "board/atmel/at91sam9m10g45ek/Kconfig"
source "board/atmel/at91sam9n12ek/Kconfig"
source "board/atmel/at91sam9rlek/Kconfig"
source "board/atmel/at91sam9x5ek/Kconfig"
source "board/atmel/sam9x60ek/Kconfig"
source "board/atmel/sam9x60_curiosity/Kconfig"
source "board/atmel/sama7g5ek/Kconfig"
source "board/atmel/sama5d2_ptc_ek/Kconfig"
source "board/atmel/sama5d2_xplained/Kconfig"
source "board/atmel/sama5d27_som1_ek/Kconfig"
source "board/atmel/sama5d27_wlsom1_ek/Kconfig"
source "board/atmel/sama5d2_icp/Kconfig"
source "board/atmel/sama5d3_xplained/Kconfig"
source "board/atmel/sama5d3xek/Kconfig"
source "board/atmel/sama5d4_xplained/Kconfig"
source "board/atmel/sama5d4ek/Kconfig"
source "board/bluewater/gurnard/Kconfig"
source "board/calao/usb_a9263/Kconfig"
source "board/egnite/ethernut5/Kconfig"
source "board/esd/meesc/Kconfig"
source "board/gardena/smart-gateway-at91sam/Kconfig"
source "board/l+g/vinco/Kconfig"
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
source "board/ronetix/pm9g45/Kconfig"
source "board/siemens/corvus/Kconfig"
source "board/siemens/taurus/Kconfig"
source "board/siemens/smartweb/Kconfig"
endif