u-boot/include/configs/ZUMA.h
wdenk c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00

379 lines
12 KiB
C

/*
* (C) Copyright 2001
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/processor.h>
#define CFG_GT_6426x GT_64260 /* with a 64260 system controller */
#define CONFIG_ETHER_PORT_MII /* use two MII ports */
#define CONFIG_INTEL_LXT97X /* Intel LXT97X phy */
#ifndef __ASSEMBLY__
#include <galileo/core.h>
#endif
#include "../board/evb64260/local.h"
#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
#define CONFIG_ZUMA_V2 1 /* always define this for ZUMA v2 */
/* #define CONFIG_ZUMA_V2_OLD 1 */ /* backwards compat for old V2 board */
#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
#define CONFIG_ECC /* enable ECC support */
#define CONFIG_750CX /* we have a 750CX/CXe (override local.h) */
/* which initialization functions to call for this board */
#define CONFIG_MISC_INIT_R
#define CONFIG_BOARD_EARLY_INIT_F
#define CFG_BOARD_ASM_INIT
#define CFG_BOARD_NAME "Zuma APv2"
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
/*
* The following defines let you select what serial you want to use
* for your console driver.
*
* what to do:
* to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
* cable onto the second DUART channel, change the CFG_DUART port from 1
* to 0 below.
*
* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
*/
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 0
#define CONFIG_NET_MULTI /* attempt all available adapters */
/* define this if you want to enable GT MAC filtering */
#define CONFIG_GT_USE_MAC_HASH_TABLE
#if 1
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"tftpboot && " \
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:" \
"$netmask:$hostname:eth0:none panic=5 && bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_MII /* enable MII commands */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_BSP | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
CFG_CMD_DATE)
/* Flash banks JFFS2 should use */
#define CFG_JFFS2_FIRST_BANK 1
#define CFG_JFFS2_NUM_BANKS 2
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x00300000 /* default load address */
#define CFG_HZ 1000 /* decr freq: 1ms ticks */
#define CFG_BUS_HZ 133000000 /* 133 MHz */
#define CFG_BUS_CLK CFG_BUS_HZ
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
#define CFG_INIT_RAM_ADDR 0x40000000
#define CFG_INIT_RAM_END 0x1000
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_RAM_LOCK
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xfff00000
#define CFG_RESET_ADDRESS 0xfff00100
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
/* areas to map different things with the GT in physical space */
#define CFG_DRAM_BANKS 4
#define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
/* What to put in the bats. */
#define CFG_MISC_REGION_BASE 0xf0000000
/* Peripheral Device section */
#define CFG_GT_REGS 0xf8000000 /* later mapped GT_REGS */
#define CFG_DEV_BASE 0xf0000000
#define CFG_DEV0_SIZE _64M /* zuma flash @ 0xf000.0000*/
#define CFG_DEV1_SIZE _8M /* zuma IDE @ 0xf400.0000 */
#define CFG_DEV2_SIZE _8M /* unused */
#define CFG_DEV3_SIZE _8M /* unused */
#define CFG_DEV0_PAR 0xc498243c
/* c 4 9 8 2 4 3 c */
/* 33 22|2222|22 22|111 1|11 11|1 1 | | */
/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
/* 11|00|0100|10 01|100|0 00|10 0|100 0|011 1|100 */
/* 3| 0|.... ..| 1| 4 | 0 | 4 | 8 | 7 | 4 */
#define CFG_DEV1_PAR 0xc01b6ac5
/* c 0 1 b 6 a c 5 */
/* 33 22|2222|22 22|111 1|11 11|1 1 | | */
/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
/* 11|00|0000|00 01|101|1 01|10 1|010 1|100 0|101 */
/* 3| 0|.... ..| 1| 5 | 5 | 5 | 5 | 8 | 5 */
#define CFG_8BIT_BOOT_PAR 0xc00b5e7c
#define CFG_MPP_CONTROL_0 0x00007777 /* GPP[7:4] : REQ0[1:0] GNT0[1:0] */
#define CFG_MPP_CONTROL_1 0x00000000 /* GPP[15:12] : GPP[11:8] */
#define CFG_MPP_CONTROL_2 0x00008888 /* GPP[23:20] : REQ1[1:0] GNT1[1:0] */
#define CFG_MPP_CONTROL_3 0x00000000 /* GPP[31:28] (int[3:0]) */
/* GPP[27:24] (27 is int4, rest are GPP) */
#define CFG_SERIAL_PORT_MUX 0x00001101 /* 11=MPSC1/MPSC0 01=ETH, 0=only MII */
#define CFG_GPP_LEVEL_CONTROL 0xf8000000 /* interrupt inputs: GPP[31:27] */
#define CFG_SDRAM_CONFIG 0xe4e18200 /* 0x448 */
/* idmas use buffer 1,1
comm use buffer 1
pci use buffer 0,0 (pci1->0 pci0->0)
cpu use buffer 1 (R*18)
normal load (see also ifdef HVL)
standard SDRAM (see also ifdef REG)
non staggered refresh */
/* 31:26 25 23 20 19 18 16 */
/* 111001 00 111 0 0 00 1 */
/* refresh count=0x200
phy interleave disable (by default,
set later by dram config..)
virt interleave enable */
/* 15 14 13:0 */
/* 1 0 0x200 */
#define CFG_DEV0_SPACE CFG_DEV_BASE
#define CFG_DEV1_SPACE (CFG_DEV0_SPACE + CFG_DEV0_SIZE)
#define CFG_DEV2_SPACE (CFG_DEV1_SPACE + CFG_DEV1_SIZE)
#define CFG_DEV3_SPACE (CFG_DEV2_SPACE + CFG_DEV2_SIZE)
/*-----------------------------------------------------------------------
* PCI stuff
*/
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* PCI MEMORY MAP section */
#define CFG_PCI0_MEM_BASE 0x80000000
#define CFG_PCI0_MEM_SIZE _128M
#define CFG_PCI1_MEM_BASE 0x88000000
#define CFG_PCI1_MEM_SIZE _128M
#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
/* PCI I/O MAP section */
#define CFG_PCI0_IO_BASE 0xfa000000
#define CFG_PCI0_IO_SIZE _16M
#define CFG_PCI1_IO_BASE 0xfb000000
#define CFG_PCI1_IO_SIZE _16M
#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
#define CFG_PCI0_IO_SPACE_PCI 0x00000000
#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
#define CFG_PCI1_IO_SPACE_PCI 0x00000000
/*----------------------------------------------------------------------
* Initial BAT mappings
*/
/* NOTES:
* 1) GUARDED and WRITE_THRU not allowed in IBATS
* 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
*/
/* SDRAM */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT0U CFG_IBAT0U
/* init ram */
#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CFG_DBAT1L CFG_IBAT1L
#define CFG_DBAT1U CFG_IBAT1U
/* PCI0, PCI1 memory space (starting at PCI0 base, mapped in one BAT) */
#define CFG_IBAT2L BATL_NO_ACCESS
#define CFG_IBAT2U CFG_DBAT2U
#define CFG_DBAT2L (CFG_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
#define CFG_DBAT2U (CFG_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
/* GT regs, bootrom, all the devices, PCI I/O */
#define CFG_IBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
#define CFG_IBAT3U (CFG_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
#define CFG_DBAT3L (CFG_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
#define CFG_DBAT3U CFG_IBAT3U
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 130 /* max number of sectors on one chip */
#define CFG_EXTRA_FLASH_DEVICE DEVICE0 /* extra flash at device 0 */
#define CFG_EXTRA_FLASH_WIDTH 2 /* 16 bit */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_FLASH_CFI 1
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
#define CFG_ENV_ADDR (0xfff80000 - CFG_ENV_SECT_SIZE)
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* L2CR setup -- make sure this is right for your board!
* look in include/74xx_7xx.h for the defines used here
*/
#define CFG_L2
#ifdef CONFIG_750CX
#define L2_INIT 0
#else
#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#endif
#define L2_ENABLE (L2_INIT | L2CR_L2E)
/*------------------------------------------------------------------------
* Real time clock
*/
#define CONFIG_RTC_DS1302
/*------------------------------------------------------------------------
* Galileo I2C driver
*/
#define CONFIG_GT_I2C
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#endif /* __CONFIG_H */