Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 16:39:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/ma5d4evk.h
Simon Glass 2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig 
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00

226 lines
6.2 KiB
C
Raw Blame History

/*
* Aries MA5D4 configuration
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#include "at91-sama5_common.h"
#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH 1
#define CONFIG_BOARD_LATE_INIT
/*
* Memory configurations
*/
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
/*
* Environment
*/
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/*
* U-Boot general configurations
*/
/*
* Serial Driver
*/
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE ATMEL_BASE_USART0
#define CONFIG_USART_ID ATMEL_ID_USART0
/*
* Ethernet
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_ARP_TIMEOUT 200UL
#define CONFIG_IP_DEFRAG
#endif
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
#define CONFIG_ATMEL_HLCD
#endif
/*
* SD/MMC
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif
/*
* SPI NOR (boot memory)
*/
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_ATMEL_SPI0
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER "AriesEmbedded"
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT 300
#endif
/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTARGS "console=ttyS3,115200"
#define CONFIG_LOADADDR 0x20800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Extra Environments
*/
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_HOSTNAME ma5d4evk
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttyS3\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"bootdev=/dev/mmcblk0p1\0" \
"bootpart=0:1\0" \
"rootdev=/dev/mmcblk0p2\0" \
"netdev=eth0\0" \
"dfu_alt_info=mmc raw 0 3867148288\0" \
"kernel_addr_r=0x22000000\0" \
"update_spi_firmware_spl_addr=0x21000000\0" \
"update_spi_firmware_spl_filename=boot.bin\0" \
"update_spi_firmware_addr=0x22000000\0" \
"update_spi_firmware_filename=u-boot.img\0" \
"update_spi_firmware=" /* Update the SPI flash firmware */ \
"if sf probe ; then " \
"if tftp ${update_spi_firmware_spl_addr} " \
"${update_spi_firmware_spl_filename} ; then " \
"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
"if tftp ${update_spi_firmware_addr} " \
"${update_spi_firmware_filename} ; then " \
"setenv update_spi_firmware_filesize ${filesize} ; " \
"sf update ${update_spi_firmware_spl_addr} 0x0 " \
"${update_spi_firmware_spl_filesize} ; " \
"sf update ${update_spi_firmware_addr} 0x10000 " \
"${update_spi_firmware_filesize} ; " \
"fi ; " \
"fi ; " \
"fi\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addargs=run addcons addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"fdtimg=if test ${bootmode} = \"sf\" ; then " \
"setenv kernel_fdt 1 ; " \
"else ; " \
"setenv kernel_fdt 2 ; " \
"fi\0" \
"mmc_mmc=" \
"run fdtimg mmcload mmcargs addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"mmc_nfs=" \
"run fdtimg mmcload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_mmc=" \
"run fdtimg netload mmcargs addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_nfs=" \
"run fdtimg netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 1:1 ${bootscript} ; then " \
"if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#define CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#endif /* __MA5D4EVK_CONFIG_H__ */
Reference in a new issue View git blame Copy permalink