mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
29caf9305b
Globally replace all occurances of WATCHDOG_RESET() with schedule(), which handles the HW_WATCHDOG functionality and the cyclic infrastructure. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
427 lines
9.6 KiB
C
427 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Intel Corporation <www.intel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <altera.h>
|
|
#include <log.h>
|
|
#include <watchdog.h>
|
|
#include <asm/arch/mailbox_s10.h>
|
|
#include <asm/arch/smc_api.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/intel-smc.h>
|
|
|
|
#define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000
|
|
#define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000
|
|
|
|
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF)
|
|
|
|
#define BITSTREAM_CHUNK_SIZE 0xFFFF0
|
|
#define RECONFIG_STATUS_POLL_RETRY_MAX 100
|
|
|
|
/*
|
|
* Polling the FPGA configuration status.
|
|
* Return 0 for success, non-zero for error.
|
|
*/
|
|
static int reconfig_status_polling_resp(void)
|
|
{
|
|
int ret;
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
ret = invoke_smc(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE, NULL, 0,
|
|
NULL, 0);
|
|
|
|
if (!ret)
|
|
return 0; /* configuration success */
|
|
|
|
if (ret != INTEL_SIP_SMC_STATUS_BUSY)
|
|
return ret;
|
|
|
|
if (get_timer(start) > RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS)
|
|
return -ETIMEDOUT; /* time out */
|
|
|
|
puts(".");
|
|
udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
|
|
schedule();
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int send_bitstream(const void *rbf_data, size_t rbf_size)
|
|
{
|
|
int i;
|
|
u64 res_buf[3];
|
|
u64 args[2];
|
|
u32 xfer_count = 0;
|
|
int ret, wr_ret = 0, retry = 0;
|
|
size_t buf_size = (rbf_size > BITSTREAM_CHUNK_SIZE) ?
|
|
BITSTREAM_CHUNK_SIZE : rbf_size;
|
|
|
|
while (rbf_size || xfer_count) {
|
|
if (!wr_ret && rbf_size) {
|
|
args[0] = (u64)rbf_data;
|
|
args[1] = buf_size;
|
|
wr_ret = invoke_smc(INTEL_SIP_SMC_FPGA_CONFIG_WRITE,
|
|
args, 2, NULL, 0);
|
|
|
|
debug("wr_ret = %d, rbf_data = %p, buf_size = %08lx\n",
|
|
wr_ret, rbf_data, buf_size);
|
|
|
|
if (wr_ret)
|
|
continue;
|
|
|
|
rbf_size -= buf_size;
|
|
rbf_data += buf_size;
|
|
|
|
if (buf_size >= rbf_size)
|
|
buf_size = rbf_size;
|
|
|
|
xfer_count++;
|
|
puts(".");
|
|
} else {
|
|
ret = invoke_smc(
|
|
INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
|
|
NULL, 0, res_buf, ARRAY_SIZE(res_buf));
|
|
if (!ret) {
|
|
for (i = 0; i < ARRAY_SIZE(res_buf); i++) {
|
|
if (!res_buf[i])
|
|
break;
|
|
xfer_count--;
|
|
wr_ret = 0;
|
|
retry = 0;
|
|
}
|
|
} else if (ret !=
|
|
INTEL_SIP_SMC_STATUS_BUSY)
|
|
return ret;
|
|
else if (!xfer_count)
|
|
return INTEL_SIP_SMC_STATUS_ERROR;
|
|
|
|
if (++retry >= RECONFIG_STATUS_POLL_RETRY_MAX)
|
|
return -ETIMEDOUT;
|
|
|
|
udelay(20000);
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This is the interface used by FPGA driver.
|
|
* Return 0 for success, non-zero for error.
|
|
*/
|
|
int intel_sdm_mb_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
|
|
{
|
|
int ret;
|
|
u64 arg = 1;
|
|
|
|
debug("Invoking FPGA_CONFIG_START...\n");
|
|
|
|
ret = invoke_smc(INTEL_SIP_SMC_FPGA_CONFIG_START, &arg, 1, NULL, 0);
|
|
|
|
if (ret) {
|
|
puts("Failure in RECONFIG mailbox command!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = send_bitstream(rbf_data, rbf_size);
|
|
if (ret) {
|
|
puts("Error sending bitstream!\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Make sure we don't send MBOX_RECONFIG_STATUS too fast */
|
|
udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
|
|
|
|
debug("Polling with MBOX_RECONFIG_STATUS...\n");
|
|
ret = reconfig_status_polling_resp();
|
|
if (ret) {
|
|
puts("FPGA reconfiguration failed!");
|
|
return ret;
|
|
}
|
|
|
|
puts("FPGA reconfiguration OK!\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
#else
|
|
|
|
static const struct mbox_cfgstat_state {
|
|
int err_no;
|
|
const char *error_name;
|
|
} mbox_cfgstat_state[] = {
|
|
{MBOX_CFGSTAT_STATE_IDLE, "FPGA in idle mode."},
|
|
{MBOX_CFGSTAT_STATE_CONFIG, "FPGA in config mode."},
|
|
{MBOX_CFGSTAT_STATE_FAILACK, "Acknowledgment failed!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_INVALID, "Invalid bitstream!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_CORRUPT, "Corrupted bitstream!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_AUTH, "Authentication failed!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_CORE_IO, "I/O error!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_HARDWARE, "Hardware error!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_FAKE, "Fake error!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO, "Error in boot info!"},
|
|
{MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR, "Error in QSPI!"},
|
|
{MBOX_RESP_ERROR, "Mailbox general error!"},
|
|
{-ETIMEDOUT, "I/O timeout error"},
|
|
{-1, "Unknown error!"}
|
|
};
|
|
|
|
#define MBOX_CFGSTAT_MAX ARRAY_SIZE(mbox_cfgstat_state)
|
|
|
|
static const char *mbox_cfgstat_to_str(int err)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MBOX_CFGSTAT_MAX - 1; i++) {
|
|
if (mbox_cfgstat_state[i].err_no == err)
|
|
return mbox_cfgstat_state[i].error_name;
|
|
}
|
|
|
|
return mbox_cfgstat_state[MBOX_CFGSTAT_MAX - 1].error_name;
|
|
}
|
|
|
|
/*
|
|
* Add the ongoing transaction's command ID into pending list and return
|
|
* the command ID for next transfer.
|
|
*/
|
|
static u8 add_transfer(u32 *xfer_pending_list, size_t list_size, u8 id)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < list_size; i++) {
|
|
if (xfer_pending_list[i])
|
|
continue;
|
|
xfer_pending_list[i] = id;
|
|
debug("ID(%d) added to transaction pending list\n", id);
|
|
/*
|
|
* Increment command ID for next transaction.
|
|
* Valid command ID (4 bits) is from 1 to 15.
|
|
*/
|
|
id = (id % 15) + 1;
|
|
break;
|
|
}
|
|
|
|
return id;
|
|
}
|
|
|
|
/*
|
|
* Check whether response ID match the command ID in the transfer
|
|
* pending list. If a match is found in the transfer pending list,
|
|
* it clears the transfer pending list and return the matched
|
|
* command ID.
|
|
*/
|
|
static int get_and_clr_transfer(u32 *xfer_pending_list, size_t list_size,
|
|
u8 id)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < list_size; i++) {
|
|
if (id != xfer_pending_list[i])
|
|
continue;
|
|
xfer_pending_list[i] = 0;
|
|
return id;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Polling the FPGA configuration status.
|
|
* Return 0 for success, non-zero for error.
|
|
*/
|
|
static int reconfig_status_polling_resp(void)
|
|
{
|
|
int ret;
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
ret = mbox_get_fpga_config_status(MBOX_RECONFIG_STATUS);
|
|
if (!ret)
|
|
return 0; /* configuration success */
|
|
|
|
if (ret != MBOX_CFGSTAT_STATE_CONFIG)
|
|
return ret;
|
|
|
|
if (get_timer(start) > RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS)
|
|
break; /* time out */
|
|
|
|
puts(".");
|
|
udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
|
|
schedule();
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static u32 get_resp_hdr(u32 *r_index, u32 *w_index, u32 *resp_count,
|
|
u32 *resp_buf, u32 buf_size, u32 client_id)
|
|
{
|
|
u32 buf[MBOX_RESP_BUFFER_SIZE];
|
|
u32 mbox_hdr;
|
|
u32 resp_len;
|
|
u32 hdr_len;
|
|
u32 i;
|
|
|
|
if (*resp_count < buf_size) {
|
|
u32 rcv_len_max = buf_size - *resp_count;
|
|
|
|
if (rcv_len_max > MBOX_RESP_BUFFER_SIZE)
|
|
rcv_len_max = MBOX_RESP_BUFFER_SIZE;
|
|
resp_len = mbox_rcv_resp(buf, rcv_len_max);
|
|
|
|
for (i = 0; i < resp_len; i++) {
|
|
resp_buf[(*w_index)++] = buf[i];
|
|
*w_index %= buf_size;
|
|
(*resp_count)++;
|
|
}
|
|
}
|
|
|
|
/* No response in buffer */
|
|
if (*resp_count == 0)
|
|
return 0;
|
|
|
|
mbox_hdr = resp_buf[*r_index];
|
|
|
|
hdr_len = MBOX_RESP_LEN_GET(mbox_hdr);
|
|
|
|
/* Insufficient header length to return a mailbox header */
|
|
if ((*resp_count - 1) < hdr_len)
|
|
return 0;
|
|
|
|
*r_index += (hdr_len + 1);
|
|
*r_index %= buf_size;
|
|
*resp_count -= (hdr_len + 1);
|
|
|
|
/* Make sure response belongs to us */
|
|
if (MBOX_RESP_CLIENT_GET(mbox_hdr) != client_id)
|
|
return 0;
|
|
|
|
return mbox_hdr;
|
|
}
|
|
|
|
/* Send bit stream data to SDM via RECONFIG_DATA mailbox command */
|
|
static int send_reconfig_data(const void *rbf_data, size_t rbf_size,
|
|
u32 xfer_max, u32 buf_size_max)
|
|
{
|
|
u32 response_buffer[MBOX_RESP_BUFFER_SIZE];
|
|
u32 xfer_pending[MBOX_RESP_BUFFER_SIZE];
|
|
u32 resp_rindex = 0;
|
|
u32 resp_windex = 0;
|
|
u32 resp_count = 0;
|
|
u32 xfer_count = 0;
|
|
int resp_err = 0;
|
|
u8 cmd_id = 1;
|
|
u32 args[3];
|
|
int ret;
|
|
|
|
debug("SDM xfer_max = %d\n", xfer_max);
|
|
debug("SDM buf_size_max = %x\n\n", buf_size_max);
|
|
|
|
memset(xfer_pending, 0, sizeof(xfer_pending));
|
|
|
|
while (rbf_size || xfer_count) {
|
|
if (!resp_err && rbf_size && xfer_count < xfer_max) {
|
|
args[0] = MBOX_ARG_DESC_COUNT(1);
|
|
args[1] = (u64)rbf_data;
|
|
if (rbf_size >= buf_size_max) {
|
|
args[2] = buf_size_max;
|
|
rbf_size -= buf_size_max;
|
|
rbf_data += buf_size_max;
|
|
} else {
|
|
args[2] = (u64)rbf_size;
|
|
rbf_size = 0;
|
|
}
|
|
|
|
resp_err = mbox_send_cmd_only(cmd_id, MBOX_RECONFIG_DATA,
|
|
MBOX_CMD_INDIRECT, 3, args);
|
|
if (!resp_err) {
|
|
xfer_count++;
|
|
cmd_id = add_transfer(xfer_pending,
|
|
MBOX_RESP_BUFFER_SIZE,
|
|
cmd_id);
|
|
}
|
|
puts(".");
|
|
} else {
|
|
u32 resp_hdr = get_resp_hdr(&resp_rindex, &resp_windex,
|
|
&resp_count,
|
|
response_buffer,
|
|
MBOX_RESP_BUFFER_SIZE,
|
|
MBOX_CLIENT_ID_UBOOT);
|
|
|
|
/*
|
|
* If no valid response header found or
|
|
* non-zero length from RECONFIG_DATA
|
|
*/
|
|
if (!resp_hdr || MBOX_RESP_LEN_GET(resp_hdr))
|
|
continue;
|
|
|
|
/* Check for response's status */
|
|
if (!resp_err) {
|
|
resp_err = MBOX_RESP_ERR_GET(resp_hdr);
|
|
debug("Response error code: %08x\n", resp_err);
|
|
}
|
|
|
|
ret = get_and_clr_transfer(xfer_pending,
|
|
MBOX_RESP_BUFFER_SIZE,
|
|
MBOX_RESP_ID_GET(resp_hdr));
|
|
if (ret) {
|
|
/* Claim and reuse the ID */
|
|
cmd_id = (u8)ret;
|
|
xfer_count--;
|
|
}
|
|
|
|
if (resp_err && !xfer_count)
|
|
return resp_err;
|
|
}
|
|
schedule();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This is the interface used by FPGA driver.
|
|
* Return 0 for success, non-zero for error.
|
|
*/
|
|
int intel_sdm_mb_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
|
|
{
|
|
int ret;
|
|
u32 resp_len = 2;
|
|
u32 resp_buf[2];
|
|
|
|
debug("Sending MBOX_RECONFIG...\n");
|
|
ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG, MBOX_CMD_DIRECT, 0,
|
|
NULL, 0, &resp_len, resp_buf);
|
|
if (ret) {
|
|
puts("Failure in RECONFIG mailbox command!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = send_reconfig_data(rbf_data, rbf_size, resp_buf[0], resp_buf[1]);
|
|
if (ret) {
|
|
printf("RECONFIG_DATA error: %08x, %s\n", ret,
|
|
mbox_cfgstat_to_str(ret));
|
|
return ret;
|
|
}
|
|
|
|
/* Make sure we don't send MBOX_RECONFIG_STATUS too fast */
|
|
udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
|
|
|
|
debug("Polling with MBOX_RECONFIG_STATUS...\n");
|
|
ret = reconfig_status_polling_resp();
|
|
if (ret) {
|
|
printf("RECONFIG_STATUS Error: %08x, %s\n", ret,
|
|
mbox_cfgstat_to_str(ret));
|
|
return ret;
|
|
}
|
|
|
|
puts("FPGA reconfiguration OK!\n");
|
|
|
|
return ret;
|
|
}
|
|
#endif
|