mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
e6fce12d14
PEX_CFG_DIRECT_ACCESS was defined in ddr3_hws_hw_training_def.h despite only being used in the serdes code. Move this definition to ctrl_pex.h where all the other PEX defines are. Also remove the duplicate definition of PEX_DEVICE_AND_VENDOR_ID which is already defined in ctrl_pex.h. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
88 lines
3.1 KiB
C
88 lines
3.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*/
|
|
|
|
#ifndef _CTRL_PEX_H
|
|
#define _CTRL_PEX_H
|
|
|
|
#include "high_speed_env_spec.h"
|
|
|
|
/* Sample at Reset */
|
|
#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4))
|
|
|
|
/* PCI Express Control and Status Registers */
|
|
#define MAX_PEX_BUSSES 256
|
|
|
|
#define MISC_REGS_OFFSET 0x18200
|
|
#define MV_MISC_REGS_BASE MISC_REGS_OFFSET
|
|
#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4)
|
|
|
|
#define PEX_IF_REGS_OFFSET(if) ((if) > 0 ? \
|
|
(0x40000 + ((if) - 1) * 0x4000) : \
|
|
0x80000)
|
|
#define PEX_IF_REGS_BASE(if) (PEX_IF_REGS_OFFSET(if))
|
|
#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60)
|
|
#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90)
|
|
#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00)
|
|
#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04)
|
|
#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64)
|
|
#define PEX_LINK_CAPABILITY_REG 0x6c
|
|
#define PEX_LINK_CTRL_STAT_REG 0x70
|
|
#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
|
|
#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
|
|
#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
|
|
#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
|
|
|
|
/* PEX_CAPABILITIES_REG fields */
|
|
#define PCIE0_ENABLE_OFFS 0
|
|
#define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS)
|
|
#define PCIE1_ENABLE_OFFS 1
|
|
#define PCIE1_ENABLE_MASK (0x1 << PCIE1_ENABLE_OFFS)
|
|
#define PCIE2_ENABLE_OFFS 2
|
|
#define PCIE2_ENABLE_MASK (0x1 << PCIE2_ENABLE_OFFS)
|
|
#define PCIE3_ENABLE_OFFS 3
|
|
#define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS)
|
|
|
|
/* Controller revision info */
|
|
#define PEX_DEVICE_AND_VENDOR_ID 0x000
|
|
#define PEX_CFG_DIRECT_ACCESS(if, reg) (PEX_IF_REGS_BASE(if) + (reg))
|
|
|
|
/* PCI Express Configuration Address Register */
|
|
#define PXCAR_REG_NUM_OFFS 2
|
|
#define PXCAR_REG_NUM_MAX 0x3f
|
|
#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \
|
|
PXCAR_REG_NUM_OFFS)
|
|
#define PXCAR_FUNC_NUM_OFFS 8
|
|
#define PXCAR_FUNC_NUM_MAX 0x7
|
|
#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \
|
|
PXCAR_FUNC_NUM_OFFS)
|
|
#define PXCAR_DEVICE_NUM_OFFS 11
|
|
#define PXCAR_DEVICE_NUM_MAX 0x1f
|
|
#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \
|
|
PXCAR_DEVICE_NUM_OFFS)
|
|
#define PXCAR_BUS_NUM_OFFS 16
|
|
#define PXCAR_BUS_NUM_MAX 0xff
|
|
#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \
|
|
PXCAR_BUS_NUM_OFFS)
|
|
#define PXCAR_EXT_REG_NUM_OFFS 24
|
|
#define PXCAR_EXT_REG_NUM_MAX 0xf
|
|
|
|
#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8)
|
|
#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc)
|
|
|
|
#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
|
|
#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS)
|
|
|
|
#define PXCAR_CONFIG_EN BIT(31)
|
|
#define PEX_STATUS_AND_COMMAND 0x004
|
|
#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */
|
|
|
|
int hws_pex_config(const struct serdes_map *serdes_map, u8 count);
|
|
int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
|
|
int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
|
|
u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off);
|
|
|
|
void board_pex_config(void);
|
|
|
|
#endif
|