mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
185f812c41
Sphinx expects Return: and not @return to indicate a return value.
find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
68 lines
1.9 KiB
C
68 lines
1.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (C) 2020 Marvell International Ltd.
|
|
*/
|
|
|
|
#ifndef __OCTEON_PCI_H__
|
|
#define __OCTEON_PCI_H__
|
|
|
|
/**
|
|
* EEPROM entry struct
|
|
*/
|
|
union octeon_pcie_eeprom {
|
|
u64 u64;
|
|
struct octeon_data_s {
|
|
/**
|
|
* 0x9DA1 valid entry, 0x6A5D end of table, 0xffff invalid
|
|
* access
|
|
*/
|
|
u64 preamble : 16;
|
|
u64: 1; /** Reserved */
|
|
/** Physical function number accessed by the write operation. */
|
|
u64 pf : 2;
|
|
/**
|
|
* Specifies bit<31> of the address written by hardware.
|
|
* 1 = configuration mask register, 0 = configuration register
|
|
*/
|
|
u64 cs2 : 1;
|
|
/**
|
|
* Specifies bits<11:0> of the address written by hardware.
|
|
* Bits<30:12> of this address are all 0s.
|
|
*/
|
|
u64 address : 12;
|
|
u64 data : 32;
|
|
} s;
|
|
};
|
|
|
|
void pci_dev_post_init(void);
|
|
|
|
int octeon_pci_io_readb(unsigned int reg);
|
|
void octeon_pci_io_writeb(int value, unsigned int reg);
|
|
int octeon_pci_io_readw(unsigned int reg);
|
|
void octeon_pci_io_writew(int value, unsigned int reg);
|
|
int octeon_pci_io_readl(unsigned int reg);
|
|
void octeon_pci_io_writel(int value, unsigned int reg);
|
|
int octeon_pci_mem1_readb(unsigned int reg);
|
|
void octeon_pci_mem1_writeb(int value, unsigned int reg);
|
|
int octeon_pci_mem1_readw(unsigned int reg);
|
|
void octeon_pci_mem1_writew(int value, unsigned int reg);
|
|
int octeon_pci_mem1_readl(unsigned int reg);
|
|
void octeon_pci_mem1_writel(int value, unsigned int reg);
|
|
|
|
/* In the TLB mapped case, these also work with virtual addresses,
|
|
** and do the required virt<->phys translations as well. */
|
|
u32 octeon_pci_phys_to_bus(u32 phys);
|
|
u32 octeon_pci_bus_to_phys(u32 bus);
|
|
|
|
/**
|
|
* Searches PCIe EEPROM for override data specified by address and pf.
|
|
*
|
|
* @param address - PCIe config space address
|
|
* @param pf - PCIe config space pf num
|
|
* @param[out] id - override device and vendor ID
|
|
*
|
|
* Return: 0 if override found, 1 if not found.
|
|
*/
|
|
int octeon_find_pcie_id_override(unsigned int address, unsigned int pf, u32 *id);
|
|
|
|
#endif /* __OCTEON_PCI_H__ */
|