mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
329 lines
7 KiB
C
329 lines
7 KiB
C
/*
|
|
* Basic I2C functions
|
|
*
|
|
* Copyright (c) 2004 Texas Instruments
|
|
*
|
|
* This package is free software; you can redistribute it and/or
|
|
* modify it under the terms of the license found in the file
|
|
* named COPYING that should have accompanied this file.
|
|
*
|
|
* THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Author: Jian Zhang jzhang@ti.com, Texas Instruments
|
|
*
|
|
* Copyright (c) 2003 Wolfgang Denk, wd@denx.de
|
|
* Rewritten to fit into the current U-Boot framework
|
|
*
|
|
* Adapted for OMAP2420 I2C, r-woodruff2@ti.com
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#ifdef CONFIG_DRIVER_OMAP24XX_I2C
|
|
|
|
#include <asm/arch/i2c.h>
|
|
#include <asm/io.h>
|
|
|
|
#define inw(a) __raw_readw(a)
|
|
#define outw(a,v) __raw_writew(a,v)
|
|
|
|
static void wait_for_bb (void);
|
|
static u16 wait_for_pin (void);
|
|
static void flush_fifo(void);
|
|
|
|
void i2c_init (int speed, int slaveadd)
|
|
{
|
|
u16 scl;
|
|
|
|
outw(0x2, I2C_SYSC); /* for ES2 after soft reset */
|
|
udelay(1000);
|
|
outw(0x0, I2C_SYSC); /* will probably self clear but */
|
|
|
|
if (inw (I2C_CON) & I2C_CON_EN) {
|
|
outw (0, I2C_CON);
|
|
udelay (50000);
|
|
}
|
|
|
|
/* 12Mhz I2C module clock */
|
|
outw (0, I2C_PSC);
|
|
speed = speed/1000; /* 100 or 400 */
|
|
scl = ((12000/(speed*2)) - 7); /* use 7 when PSC = 0 */
|
|
outw (scl, I2C_SCLL);
|
|
outw (scl, I2C_SCLH);
|
|
/* own address */
|
|
outw (slaveadd, I2C_OA);
|
|
outw (I2C_CON_EN, I2C_CON);
|
|
|
|
/* have to enable intrrupts or OMAP i2c module doesn't work */
|
|
outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
|
|
I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
|
|
udelay (1000);
|
|
flush_fifo();
|
|
outw (0xFFFF, I2C_STAT);
|
|
outw (0, I2C_CNT);
|
|
}
|
|
|
|
static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
|
|
{
|
|
int i2c_error = 0;
|
|
u16 status;
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb ();
|
|
|
|
/* one byte only */
|
|
outw (1, I2C_CNT);
|
|
/* set slave address */
|
|
outw (devaddr, I2C_SA);
|
|
/* no stop bit needed here */
|
|
outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
|
|
|
|
status = wait_for_pin ();
|
|
|
|
if (status & I2C_STAT_XRDY) {
|
|
/* Important: have to use byte access */
|
|
*(volatile u8 *) (I2C_DATA) = regoffset;
|
|
udelay (20000);
|
|
if (inw (I2C_STAT) & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
}
|
|
} else {
|
|
i2c_error = 1;
|
|
}
|
|
|
|
if (!i2c_error) {
|
|
/* free bus, otherwise we can't use a combined transction */
|
|
outw (0, I2C_CON);
|
|
while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
|
|
udelay (10000);
|
|
/* Have to clear pending interrupt to clear I2C_STAT */
|
|
outw (0xFFFF, I2C_STAT);
|
|
}
|
|
|
|
wait_for_bb ();
|
|
/* set slave address */
|
|
outw (devaddr, I2C_SA);
|
|
/* read one byte from slave */
|
|
outw (1, I2C_CNT);
|
|
/* need stop bit here */
|
|
outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
|
|
I2C_CON);
|
|
|
|
status = wait_for_pin ();
|
|
if (status & I2C_STAT_RRDY) {
|
|
*value = inw (I2C_DATA);
|
|
udelay (20000);
|
|
} else {
|
|
i2c_error = 1;
|
|
}
|
|
|
|
if (!i2c_error) {
|
|
outw (I2C_CON_EN, I2C_CON);
|
|
while (inw (I2C_STAT)
|
|
|| (inw (I2C_CON) & I2C_CON_MST)) {
|
|
udelay (10000);
|
|
outw (0xFFFF, I2C_STAT);
|
|
}
|
|
}
|
|
}
|
|
flush_fifo();
|
|
outw (0xFFFF, I2C_STAT);
|
|
outw (0, I2C_CNT);
|
|
return i2c_error;
|
|
}
|
|
|
|
static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
|
|
{
|
|
int i2c_error = 0;
|
|
u16 status, stat;
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb ();
|
|
|
|
/* two bytes */
|
|
outw (2, I2C_CNT);
|
|
/* set slave address */
|
|
outw (devaddr, I2C_SA);
|
|
/* stop bit needed here */
|
|
outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
|
|
I2C_CON_STP, I2C_CON);
|
|
|
|
/* wait until state change */
|
|
status = wait_for_pin ();
|
|
|
|
if (status & I2C_STAT_XRDY) {
|
|
/* send out two bytes */
|
|
outw ((value << 8) + regoffset, I2C_DATA);
|
|
/* must have enough delay to allow BB bit to go low */
|
|
udelay (50000);
|
|
if (inw (I2C_STAT) & I2C_STAT_NACK) {
|
|
i2c_error = 1;
|
|
}
|
|
} else {
|
|
i2c_error = 1;
|
|
}
|
|
|
|
if (!i2c_error) {
|
|
int eout = 200;
|
|
|
|
outw (I2C_CON_EN, I2C_CON);
|
|
while ((stat = inw (I2C_STAT)) || (inw (I2C_CON) & I2C_CON_MST)) {
|
|
udelay (1000);
|
|
/* have to read to clear intrrupt */
|
|
outw (0xFFFF, I2C_STAT);
|
|
if(--eout == 0) /* better leave with error than hang */
|
|
break;
|
|
}
|
|
}
|
|
flush_fifo();
|
|
outw (0xFFFF, I2C_STAT);
|
|
outw (0, I2C_CNT);
|
|
return i2c_error;
|
|
}
|
|
|
|
static void flush_fifo(void)
|
|
{ u16 stat;
|
|
|
|
/* note: if you try and read data when its not there or ready
|
|
* you get a bus error
|
|
*/
|
|
while(1){
|
|
stat = inw(I2C_STAT);
|
|
if(stat == I2C_STAT_RRDY){
|
|
inw(I2C_DATA);
|
|
outw(I2C_STAT_RRDY,I2C_STAT);
|
|
udelay(1000);
|
|
}else
|
|
break;
|
|
}
|
|
}
|
|
|
|
int i2c_probe (uchar chip)
|
|
{
|
|
int res = 1; /* default = fail */
|
|
|
|
if (chip == inw (I2C_OA)) {
|
|
return res;
|
|
}
|
|
|
|
/* wait until bus not busy */
|
|
wait_for_bb ();
|
|
|
|
/* try to read one byte */
|
|
outw (1, I2C_CNT);
|
|
/* set slave address */
|
|
outw (chip, I2C_SA);
|
|
/* stop bit needed here */
|
|
outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
|
|
/* enough delay for the NACK bit set */
|
|
udelay (50000);
|
|
|
|
if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
|
|
res = 0; /* success case */
|
|
flush_fifo();
|
|
outw(0xFFFF, I2C_STAT);
|
|
} else {
|
|
outw(0xFFFF, I2C_STAT); /* failue, clear sources*/
|
|
outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
|
|
udelay(20000);
|
|
wait_for_bb ();
|
|
}
|
|
flush_fifo();
|
|
outw (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
|
|
outw(0xFFFF, I2C_STAT);
|
|
return res;
|
|
}
|
|
|
|
int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
int i;
|
|
|
|
if (alen > 1) {
|
|
printf ("I2C read: addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if (addr + len > 256) {
|
|
printf ("I2C read: address out of range\n");
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i2c_read_byte (chip, addr + i, &buffer[i])) {
|
|
printf ("I2C read: I/O error\n");
|
|
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
int i;
|
|
|
|
if (alen > 1) {
|
|
printf ("I2C read: addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if (addr + len > 256) {
|
|
printf ("I2C read: address out of range\n");
|
|
return 1;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (i2c_write_byte (chip, addr + i, buffer[i])) {
|
|
printf ("I2C read: I/O error\n");
|
|
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wait_for_bb (void)
|
|
{
|
|
int timeout = 10;
|
|
u16 stat;
|
|
|
|
outw(0xFFFF, I2C_STAT); /* clear current interruts...*/
|
|
while ((stat = inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
|
|
outw (stat, I2C_STAT);
|
|
udelay (50000);
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
|
|
inw (I2C_STAT));
|
|
}
|
|
outw(0xFFFF, I2C_STAT); /* clear delayed stuff*/
|
|
}
|
|
|
|
static u16 wait_for_pin (void)
|
|
{
|
|
u16 status;
|
|
int timeout = 10;
|
|
|
|
do {
|
|
udelay (1000);
|
|
status = inw (I2C_STAT);
|
|
} while ( !(status &
|
|
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
|
|
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
|
|
I2C_STAT_AL)) && timeout--);
|
|
|
|
if (timeout <= 0) {
|
|
printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
|
|
inw (I2C_STAT));
|
|
outw(0xFFFF, I2C_STAT);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
#endif /* CONFIG_DRIVER_OMAP24XX_I2C */
|